Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Arm length | 9.7 ft |
Breakout Force | 44959.6 lbs |
Bucket Capacity - heaped | 5.5 cu yd |
Bucket Width | 9.1 ft |
Digging depth | 4 ft |
Dump Clearance at Max Raise | 10.6 ft |
Ground Clearance | 1.9 ft |
Height - Top of Cab | 11.9 ft |
Hinge Pin - Max Height | 14.4 ft |
Length with Bucket on Ground | 30.1 ft |
Reach at Max Lift and Dump | 3.2 ft |
Wheelbase | 11.8 ft |
Alternator | 28/180 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Air cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
Bore | 4.8 in |
Displacement | 642 cu in |
Engine Model | D936 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 272 hp (203 kw) |
Max Torque | 1409 lbs ft |
Net Power | 268 hp (200 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Stroke | 6 in |
Torque Measured @ | 1100 rpm |
Dump Time | 2 seconds |
Lower Time | 3.5 seconds |
Pump Flow Capacity | 77 gpm |
Pump Type | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
Raise Time | 5.5 seconds |
Relief Valve Setting | 4351.2 psi |
Cooling System Fluid Capacity | 19.3 gal |
Engine Oil Fluid Capacity | 10.6 gal |
Front Axle/Diff Fluid Capacity | 11.1 gal |
Fuel Capacity | 96 gal |
Hydraulic Fluid Capacity | 27.7 gal |
Hydraulic System Fluid Capacity | 50.2 gal |
Operating Weight | 52690 lbs |
Rear Axle/Diff Fluid Capacity | 11.1 gal |
Static Tipping Weight | 35055 lbs |
Tire Size | 26.5R25 L3 |
Turning Radius | 24.1 ft |
Max Speed - Forward | 24.9 mph (39 kph) |
Max Speed - Reverse | 24.9 mph (39 kph) |