Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 39,341.57 lbs (17,845.06 kg) |
|---|---|
| Bucket Capacity - Heaped | 5.89 cu yd |
| Bucket Width | 9.85 ft (3.00 m) |
| Dump Clearance At Max Raise | 10.83 ft (3.30 m) |
| Ground Clearance | 1.81 ft (0.55 m) |
|---|---|
| Height To Top Of Cab | 11.62 ft (3.54 m) |
| Hinge Pin - Max Height | 14.98 ft (4.57 m) |
| Length With Bucket On Ground | 29.47 ft (8.98 m) |
| Reach At Max Lift And Dump | 4.17 ft (1.27 m) |
| Wheelbase | 11.32 ft (3.45 m) |
| Aspiration | Inline engine, water-cooled exhaust-turbo charged with intercooler |
|---|---|
| Displacement | 607.80 cu in (9,960.08 cu cm) |
| Engine Make | 2245 |
| Engine Model | D 926 TI-E A2 |
| Gross Power | 265.00 hp (197.61 kw) |
| Max Torque | 947.80 lbs ft (1,285.03 nm) |
| Number Of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1200 rpm |
| Dump Time | 2 sec |
|---|---|
| Lower Time | 3.5 sec |
| Pump Flow Capacity | 76.70 gpm (290.31 lpm) |
| Pump Type | Load-sensing, variable axial piston pump with output control and pressure cutoff |
| Raise Time | 5.6 sec |
| Relief Valve Setting | 5076.4 psi |
| Alternator Supplied Amperage | 55 amps |
|---|---|
| Engine Oil Fluid Capacity | 6.30 gal (23.85 l) |
| Front Axle/Diff Fluid Capacity | 13.50 gal (51.10 l) |
| Fuel Capacity | 87.20 gal (330.05 l) |
| Hydraulic System Fluid Capacity | 63.50 gal (240.35 l) |
| Operating Voltage | 24 V |
| Operating Weight | 53,462.20 lbs (24,250.08 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 13.50 gal (51.10 l) |
| Static Tipping Weight | 40,454.90 lbs (18,350.06 kg) |
| Tire Size | 26.5 R 25 |
| Turning Radius | 23.30 ft (7.10 m) |
| Max Speed - Forward | 24.90 mph (40.07 kph) |
|---|---|
| Max Speed - Reverse | 24.90 mph (40.07 kph) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Transmission Type | Stepless hydrostatic travel drive 2plus2 |