Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Bucket Capacity - heaped | 5.90 cu yd (4.51 cu m) |
| Bucket Width | 9.90 ft (3.02 m) |
| Dump Clearance at Max Raise | 10.50 ft (3.20 m) |
| Ground Clearance | 1.90 ft (0.58 m) |
| Height - Top of Cab | 11.70 ft (3.57 m) |
| Hinge Pin - Max Height | 14.40 ft (4.39 m) |
| Length with Bucket on Ground | 29.60 ft (9.02 m) |
| Wheelbase | 11.80 ft (3.60 m) |
| Aspiration | turbo-charged |
| Displacement | 642.00 cu in (10,520.52 cu cm) |
| Engine Model | D 936 L A6 |
| Gross Power | 268.30 hp (200.07 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
| Dump Time | 2 seconds |
| Lower Time | 3.5 seconds |
| Pump Flow Capacity | 76.70 gpm (290.31 lpm) |
| Pump Type | Load-sensing swash plate type variable flow pump with output and flow control and pressure cut-off in the control block |
| Raise Time | 5.5 seconds |
| Relief Valve Setting | 5076.4 psi |
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 13.80 gal (52.23 l) |
| Engine Oil Fluid Capacity | 11.40 gal (43.15 l) |
| Front Axle/Diff Fluid Capacity | 13.50 gal (51.10 l) |
| Fuel Capacity | 105.70 gal (400.07 l) |
| Hydraulic System Fluid Capacity | 68.70 gal (260.03 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 53,484.20 lbs (24,260.06 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 13.50 gal (51.10 l) |
| Tire Size | 26.5R25 |
| Max Speed - Forward | 24.90 mph (40.07 kph) |
| Max Speed - Reverse | 24.90 mph (40.07 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | hydrostatic |