Categories ↠ Wheel Loaders ↠ Mecalac AS 210E

Mecalac AS 210E Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Mecalac ➔
Model: AS 210E ➔

Bucket

Breakout force	13000 newton
Dumping angle, top	45 degrees
Lifting force	10600 newton
Payload on forks, max. turned, frontal	10,361.80 lbs (4,700.04 kg)
Payload on forks, max. turned, max. swivelled	14,550.60 lbs (6,600.05 kg)
Thrust force	11300 newton
Tilting angle	45 degrees
Tipping load Standard bucket	17,196.10 lbs (7,800.03 kg)
Tipping load Standard bucket, max. turned, 90	16,534.70 lbs (7,500.02 kg)

Dimensions

Ground Clearance	1.70 ft (0.52 m)
Height - Top of Cab	10.40 ft (3.17 m)
Length with Bucket on Ground	23.50 ft (7.16 m)
Turning Radius	16.40 ft (5.00 m)

Engine

Alternator	100 amps
Battery	2 x 88 Ah
Engine Model	TCD 6.1 L6
Net Power	175.00 hp (130.50 kw)
Power Measured @	2200 rpm
Torque Measured @	1450 rpm

Operating Specifications

Engine Oil Fluid Capacity	3.70 gal (14.00 l)
Front Axle/Diff Fluid Capacity	6.70 gal (25.36 l)
Fuel Capacity	66.10 gal (250.19 l)
Hydraulic System Fluid Capacity	60.80 gal (230.13 l)
Operating Voltage	24 volts
Operating Weight	33,069.40 lbs (15,000.05 kg)
Rear Axle Oscillation	10 degrees
Rear Axle/Diff Fluid Capacity	6.70 gal (25.36 l)
Steering Angle	25 degrees

Transmission

Max Speed - Forward

12.50 mph (20.12 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon