All Equipment Category Specs ↠ Wheel Loaders ↠ Mecalac AX 850

Mecalac AX 850 Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Mecalac (See all Mecalac Equipment for sale)
Model: AX 850 (See all Mecalac AX 850 for sale)

Bucket

Breakout force	4200 newton
Bucket Capacity - heaped	2 cu yd (2 cu m)
Dumping angle, top	45 degrees
Lifting force	4300 newton
Payload on forks, max. turned, frontal	5180.9 lbs (2,350 kg)
Thrust force	3800 newton
Tipping load Standard bucket	8157.2 lbs (3,700 kg)

Dimensions

Ground Clearance	1.4 ft (0 m)
Height - Top of Cab	8.2 ft (2 m)
Hinge Pin - Max Height	10.8 ft (3 m)
Length with Bucket on Ground	17.4 ft (5 m)
Reach at Max Lift and Dump	2.6 ft (1 m)
Wheelbase	6.7 ft (2 m)
Width Over Tires	5.8 ft (2 m)

Engine

Aspiration	Low-noise, water-cooled, turbo diesel engine
Battery	100 Ah
Engine Model	Deutz TD 2.9 L4
Net Power	68 hp (51 kw)
Power Measured @	2300 rpm
Torque Measured @	1800 rpm

Hydraulic System

Pump Flow Capacity	16.4 gpm (62 lpm)
Pump Type	Single circuit hydraulics with central gear pump

Operating Specifications

Alternator Supplied Amperage	95 amps
Front Axle/Diff Fluid Capacity	1.6 gal (6 l)
Fuel Capacity	23 gal (87 l)
Hydraulic System Fluid Capacity	15.9 gal (60 l)
Operating Voltage	12 volts
Operating Weight	11133.4 lbs (5,050 kg)
Rear Axle Oscillation	11 degrees
Rear Axle/Diff Fluid Capacity	1.8 gal (7 l)
Steering Angle	40 degrees
Tire Size	12.5-18
Turning Radius	12.2 ft (4 m)

Transmission

Max Speed - Forward

12.5 mph (20 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon