Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Capacity | 5.3 cu yd |
Blade Width | 11.2 ft |
Breakout Force | 40182 lbs |
Bucket Capacity - heaped | 5 cu yd |
Bucket Capacity - struck | 4.6 cu yd |
Dump Clearance at Max Lift | 10.5 ft |
Fork Tine Length | 5 ft |
Hinge Pin Max Height | 14.6 ft |
Length w/ Bucket on Ground | 26.8 ft |
Length with out Forks on Ground | 26.9 ft |
Length With Blade on Ground | 27.3 ft |
Max Lift Height | 2.8 ft |
Reach at Max Height and Dump | 3.8 ft |
Wheelbase | 11.7 ft |
Width Over Tires | 9.9 ft |
Width Over Wheels | 10.8 ft |
Aspiration | turbocharged |
Displacement | 586 cu in |
Gross Power | 264 hp (197 kw) |
Net Power | 252 hp (188 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1400 rpm |
Dump Time | 1.9 seconds |
Lower Time | 2.8 seconds |
Pump Flow Capacity | 66.1 gpm |
Pump Type | triple vane type |
Raise Time | 7 seconds |
Relief Valve Setting | 2900 psi |
Cooling System Fluid Capacity | 18.5 gal |
Front Diff Fluid Capacity | 11.9 gal |
Fuel Capacity | 89.9 gal |
Hydraulic System Fluid Capacity | 84.6 gal |
Operating Voltage | 24 volts |
Rear Axle Oscillation | 30 deg |
Rear Diff Fluid Capacity | 14.8 gal |
Static Tipping Load | 33885.1 lbs |
Static Tipping Load - Bucket | 37390 lbs |
Static Tipping Load - Forks | 22487.2 lbs |
Tire Size | 26.5-25 |
Transmission Fluid Capacity | 12.5 gal |
Turning Radius | 24.3 ft |
Max Speed | 25.2 mph (40 kph) |
Max Speed Forward | 24.8 mph (39 kph) |
Max Speed Reverse | 24.8 mph (39 kph) |
Front Wheels Drum Diameter | 55.2 in |
Front Wheels Drum Width | 33.5 in |
Rear Wheels Drum Diameter | 55.2 in |
Rear Wheels Drum Width | 33.5 in |