Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 80,000.00 lbs (36,287.43 kg) |
| Bucket Capacity - heaped | 7.00 cu yd (5.35 cu m) |
| Bucket Capacity - struck | 5.90 cu yd (4.51 cu m) |
| Bucket Width | 12.40 ft (3.78 m) |
| Dump Clearance at Max Raise | 12.30 ft (3.75 m) |
| Ground Clearance | 1.90 ft (0.58 m) |
| Height - Top of Cab | 12.90 ft (3.93 m) |
| Hinge Pin - Max Height | 16.50 ft (5.03 m) |
| Length with Bucket on Ground | 33.60 ft (10.24 m) |
| Reach at Max Lift and Dump | 5.60 ft (1.71 m) |
| Wheelbase | 12.40 ft (3.78 m) |
| Width Over Tires | 11.40 ft (3.47 m) |
| Aspiration | turbocharged |
| Displacement | 1,150.00 cu in (18,845.17 cu cm) |
| Engine Model | KT-19-C |
| Gross Power | 400.00 hp (298.28 kw) |
| Net Power | 360.00 hp (268.46 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1500 rpm |
| Dump Time | 3 seconds |
| Lower Time | 5 seconds |
| Pump Flow Capacity | 179.00 gpm (677.52 lpm) |
| Pump Type | gear type |
| Raise Time | 8.6 seconds |
| Relief Valve Setting | 2750 psi |
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 26.00 gal (98.41 l) |
| Engine Oil Fluid Capacity | 11.00 gal (41.64 l) |
| Front Axle/Diff Fluid Capacity | 16.00 gal (60.56 l) |
| Fuel Capacity | 188.00 gal (711.58 l) |
| Hydraulic System Fluid Capacity | 120.00 gal (454.20 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 91,070.00 lbs (41,308.71 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 16.00 gal (60.56 l) |
| Static Tipping Weight | 56,680.90 lbs (25,710.06 kg) |
| Tire Size | 29.5-29 (28 PR) L-4 |
| Transmission Fluid Capacity | 19.10 gal (72.29 l) |
| Turning Radius | 28.10 ft (8.56 m) |
| Max Speed - Forward | 21.50 mph (34.60 kph) |
| Max Speed - Reverse | 21.50 mph (34.60 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Transmission Type | Clark countershaft type powershift transmission |