Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 110,200.00 lbs (49,985.94 kg) |
| Bucket Capacity - heaped | 7.50 cu yd (5.73 cu m) |
| Bucket Capacity - struck | 6.20 cu yd (4.74 cu m) |
| Bucket Width | 13.00 ft (3.96 m) |
| Dump Clearance at Max Raise | 13.80 ft (4.21 m) |
| Ground Clearance | 1.90 ft (0.58 m) |
| Height - Top of Cab | 13.80 ft (4.21 m) |
| Hinge Pin - Max Height | 17.90 ft (5.46 m) |
| Length with Bucket on Ground | 35.30 ft (10.76 m) |
| Reach at Max Lift and Dump | 5.70 ft (1.74 m) |
| Wheelbase | 13.40 ft (4.08 m) |
| Width Over Tires | 12.00 ft (3.66 m) |
| Aspiration | turbo + aftercooled |
| Displacement | 1,150.00 cu in (18,845.17 cu cm) |
| Engine Model | KTA 19C |
| Gross Power | 452.00 hp (337.06 kw) |
| Net Power | 417.00 hp (310.96 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1500 rpm |
| Dump Time | 2.1 seconds |
| Lower Time | 5.4 seconds |
| Pump Flow Capacity | 194.00 gpm (734.29 lpm) |
| Pump Type | three gear type |
| Raise Time | 9 seconds |
| Relief Valve Setting | 2900 psi |
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 35.10 gal (132.85 l) |
| Engine Oil Fluid Capacity | 13.50 gal (51.10 l) |
| Front Axle/Diff Fluid Capacity | 18.00 gal (68.13 l) |
| Fuel Capacity | 212.20 gal (803.18 l) |
| Hydraulic System Fluid Capacity | 160.10 gal (605.98 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 100,540.00 lbs (45,604.23 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 18.00 gal (68.13 l) |
| Static Tipping Weight | 67,031.00 lbs (30,404.79 kg) |
| Tire Size | 35/65-33 (30PR) L-4 |
| Transmission Fluid Capacity | 18.00 gal (68.13 l) |
| Turning Radius | 30.10 ft (9.17 m) |
| Max Speed - Forward | 22.10 mph (35.57 kph) |
| Max Speed - Reverse | 13.00 mph (20.92 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | Clark 6421-11 countershaft type powershift |