Categories ↠ Wheel Loaders ↠ Mustang ML48

Mustang ML48 Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Mustang ➔
Model: ML48 ➔

Bucket

Breakout Force	7,868.00 lbs (3,568.87 kg)
Bucket Capacity - heaped	1.90 cu yd (1.45 cu m)
Bucket Capacity - struck	1.20 cu yd (0.92 cu m)
Bucket Width	6.30 ft (1.92 m)
Dump Clearance at Max Raise	8.20 ft (2.50 m)

Dimensions

Ground Clearance	1.10 ft (0.34 m)
Height - Top of Cab	8.30 ft (2.53 m)
Hinge Pin - Max Height	10.70 ft (3.26 m)
Length with Bucket on Ground	16.70 ft (5.09 m)
Reach at Max Lift and Dump	2.40 ft (0.73 m)
Wheelbase	6.40 ft (1.95 m)
Width Over Tires	5.60 ft (1.71 m)

Engine

Displacement	190.00 cu in (3,113.55 cu cm)
Engine Model	F4M2011
Gross Power	65.00 hp (48.47 kw)
Net Power	59.00 hp (44.00 kw)
Number of Cylinders	4
Power Measured @	2400 rpm

Hydraulic System

Pump Flow Capacity	19.50 gpm (73.81 lpm)
Relief Valve Setting	3046 psi

Operating Specifications

Fuel Capacity	21.10 gal (79.86 l)
Hydraulic System Fluid Capacity	18.50 gal (70.02 l)
Operating Weight	9,921.00 lbs (4,500.10 kg)
Rear Axle Oscillation	40 degrees
Static Tipping Weight	7,496.00 lbs (3,400.13 kg)
Tire Size	12.5 - 20
Turning Radius	11.30 ft (3.44 m)

Transmission

Max Speed - Forward	12.40 mph (19.96 kph)
Max Speed - Reverse	12.40 mph (19.96 kph)
Number of Forward Gears	1
Number of Reverse Gears	1
Transmission Type	Hydrostatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon