Categories ↠ Wheel Loaders ↠ Volvo L110H

Volvo L110H Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Volvo ➔
Model: L110H ➔

The Volvo L110H is a medium-size wheel loader designed for material handling, loading, and site support in construction, quarry, aggregate, and industrial applications. It is part of Volvo Construction Equipment's H-series and is commonly used for truck loading, stockpile work, and general earthmoving. The L110H typically features a fuel-efficient diesel engine, hydrostatic or torque-converter driveline depending on configuration, articulated steering, and a purpose-built loader linkage for breakout force and lift performance. Operator comfort, visibility, and service access are key design elements. The model is used in applications requiring reliable cycle times, stability, and versatile attachment compatibility.

See all Volvo L110Hs for sale

General Specifications

Bucket Capacity	4.6 (3.5) Starting 2024 Model Year
Engine Power	254 (189) Starting 2021 Model Year
Engine type	Volvo D8M Starting 2024 Model Year
Max Dump Height	9 (2.7) Starting 2024 Model Year
Operating Weight	43,030 (19,510) Starting 2024 Model Year

Axles

Axle oil front	9.60 gal (36.34 l)
Axle oil rear	10.90 gal (41.26 l)
Front	Volvo AWB 31
Rear	Volvo AWB 30
Rear axle oscillation	13 degrees

Bucket

Breakout Force

40,892.80 lbs (18,548.69 kg)

Dimensions

Ground Clearance	1.60 ft (0.49 m)
Height - Top of Cab	11.10 ft (3.38 m)
Hinge Pin - Max Height	13.30 ft (4.05 m)
Length with Bucket on Ground	26.70 ft (8.14 m)
Wheelbase	1.50 ft (0.46 m)
Width Over Tires	8.80 ft (2.68 m)

Drive System

Torque multiplication, stall ratio	2.47:1
Transmission	Volvo HTL 206C
Transport speed, maximum	24.90 mph (40.07 kph)

Electrical System

Alternator rating	2280/80 (W/A)
Battery capacity	2 x 170 Ah
Cold cranking capacity	1000 A
Starter motor output	7.40 hp (5.52 kw)
Voltage	24 V

Engine

Aspiration	Turbocharged
Displacement	476.00 cu in (7,800.26 cu cm)
Engine Model	Volvo D8J
Gross Power	256.20 hp (191.05 kw)
Number of Cylinders	6
Power Measured @	1800 rpm
Torque Measured @	1450 rpm

Hydraulic cycle times (unloaded)

Lift	5.4 seconds
Lower	2.5 seconds
Tilt	2.1 seconds
Total cycle time	10 seconds

Hydraulic System

Engine speed	1900 rpm
Working pressure	Pump 1 - 27 MPa Pump 2 - 29 MPa Pump 3 - 21 MPa

Operating Specifications

Cooling System Fluid Capacity	11.40 gal (43.15 l)
DEF tank capacity	6.70 gal (25.36 l)
Engine Oil Fluid Capacity	5.90 gal (22.33 l)
Fuel Capacity	71.40 gal (270.25 l)
Hydraulic System Fluid Capacity	35.20 gal (133.23 l)
Transmission Fluid Capacity	10.10 gal (38.23 l)

Steering System

Articulation angle	40 degrees
Cylinder bore	3.20 in (8.13 cm)
Maximum flow	31.80 gpm (120.36 lpm)
Rod diameter	2.00 in (5.08 cm)
Steering cylinders	2
Stroke	1.60 ft (0.49 m)
Working pressure	21 MPa 210 bar

Weights

Operating Weight

40,920.00 lbs (18,561.02 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon