Felling Adds Triple Axle FT-30-3 I Drill Series to Pair with New Drill on the Market

Wed September 11, 2019 - National Edition
Felling Trailers


Felling’s FT-30-3 I-S drill series was designed to pair with a new heavier and wider model drill about to be released.
Felling’s FT-30-3 I-S drill series was designed to pair with a new heavier and wider model drill about to be released.

Felling Trailers Inc. has focused on manufacturing trailers for the underground drill and trencher industry for a long time. A dealer/customer informed a Felling Trailers' salesperson that a new model drill was going to be released that was heavier and wider than current models and asked that Felling design a trailer to transport the new drill and its required mud mix system.

The current Felling models were limited by the tire capacities available for a two-axle configuration, so the company's engineering and sales teams went to work to design a three-axle model with the deck between the fenders to obtain the lowest deck height possible, yet be available in either electric brakes or air brakes depending on the end user's needs. In this design, they also incorporated some of the options that many utility customers require as standard, items such as an extended hitch configuration that includes about 30 in. of minimal tongue width back as far as the jack to allow a tighter turning radius. This hitch configuration allows a heavy-duty spring foot jack to be mounted on the outside of the hitch for easy jack operation without reaching inside of the hitch to operate.

The elevated water tank stands were designed with increased strength and narrower to allow the tank to mount a little farther over the fender, accommodating the wider drill yet keep the tank as low as possible.

For more information, call 800/245-2809 or visit www.felling.com.