Hamm Adds Models to the HD CompactLine

Mon November 03, 2014 - National Edition
CEG


There are countless areas of application for Hamm’s CompactLine with oscillation, for example the compaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areas or along joints and even compaction of water-bound pat
There are countless areas of application for Hamm’s CompactLine with oscillation, for example the compaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areas or along joints and even compaction of water-bound pat
There are countless areas of application for Hamm’s CompactLine with oscillation, for example the compaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areas or along joints and even compaction of water-bound pat Hamm offers two different chip spreaders for rollers from 5,000 lbs. (2,268 kg) operating weight.

Thirty years after Hamm built the first oscillatory rollers, this intelligent technology is now making its debut in the minus 9,000 lbs. weight class at Hamm. A total of four models with oscillation technology are available, identifiable by an “O” in the name: HD 10 VO (5,500 lbs. [2,494 kg]), HD 12 VO (6,000 lbs. [2,721 kg]), HD 13 VO (8,800 lbs. [3,991 kg]) and HD 14 VO (9,500 lbs. [4,309 kg]). All of them are equipped with one oscillatory and one vibratory drum.

The advantage of oscillation is it achieves a rapid increase in compaction because the oscillation drum directs tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material brings about a faster, better and more gentle compaction. Moreover the amplitude and in turn the compaction power adapt automatically to the stiffness present. Hamm achieves this effect without electronics, but through intelligent application of the laws of physics.

Wide Application Spectrum for Oscillatory Rollers

The new Hamm rollers with one oscillatory and one vibratory drum increase compaction speed and quality, according to the manufacturer. Applications can be found in urban centers for example. The reason: oscillation drums can compact dynamically even on narrow construction sites, because this compaction technology does not disturb buildings or pipework below the road surface through vibration.

Oscillation also optimizes compaction at joints to existing road surfaces, because it does not damage the cold asphalt. So the compaction on small job sites will be more effective than before when using oscillatory rollers.

During the compaction of thin layers on tack coat or spray seal, the high compaction speed makes a noticeable improvement. A further plus point in favour of oscillatory rollers is that they also work very efficiently on cooled asphalt.

Last but not least, oscillatory compaction also optimizes many landscaping applications. Water-bound path surfaces or asphalt cycle paths can be compacted significantly more efficiently with the new rollers than heretofore.

HD 10C VT Combi Roller

The HD 10C VT is the smallest combi roller in the CompactLine with a working width of 3.5 ft. (1.06 m) and operating weight of 3,500 lbs. (1,587 kg). It comes with permanent all-wheel drive as standard. This distinguishes it from all other compact rollers in this size and gives it outstanding gradeability in all situations, according to the manufacturer.

New Options: Drivers’ Cab and Chip Spreader

Hamm has developed a fully-enclosed driver’s cab for the largest models in the compact class, the HD 13 and HD 14. The panoramic cabin features full height glazing and provides an overview of the construction site. Hamm also has thought about many other niceties and safety features: heating, radio, screen wipers, four halogen front headlights (H9) and two rear spotlights are some of the cab options.

With its own chip spreaders for the CompactLine, Hamm offers a complement to the rollers for repair work on motorways or other heavily used roads. The linear spreader has stepless adjustment and is operated from the driver’s seat. Its diffusion grill produces a remarkably even distribution pattern. The chip spreader is available in two spreading widths: 3.28 ft. (1 m)/53 gal. (200 L) or 3.95 ft. (1.20 m)/63 gal. (240 L). Mounting is easy with a forklift truck and the mounting point close to the machine frame ensures a favorable weight distribution.

Drum Lighting and Hinged Scraper for More Quality and Safety

Hamm has included an extremely bright drum lighting in its program for the entire CompactLine. The environment-friendly LED lighting brings good illumination to the working area. This is an important quality and safety feature, as the compact rollers frequently work at the end of the roller group in poorly illuminated areas.

Another new option for all CompactLine models is the spring loaded hinged scraper. It keeps the drums clean while compacting and can be hinged out of the way by means of a foot pedal for replacement or cleaning.