Fri April 04, 2014
The Multi-Ripper Talon Bucket Gets The Job Done
Leading Edge Attachments Inc. now offers the multi-ripper talon bucket as an addition to the multi-ripper SHARC product line. Designed mainly for utility pipeline contractors, the multi-ripper talon bucket works on the same principle as the multi-ripper bucket, except the bucket is very narrow, and the leading edges have been redesigned so that the center rib can be eliminated, thus improving capacity fill and dumping for a narrow bucket....
Fri April 04, 2014
Multi-DigNRip Bucket Combines Multiple Tools Into One
The Leading Edge Attachments Inc. Multi-DigNRip bucket can replace hammers, blasting and rock trenchers for high production rip and load applications where a wider rock ripping bucket is required. Manufactured in the United States, the Multi-DigNRip bucket is a combination of the high force producing multi-ripper bucket, and the high capacity of the DigNRip bucket....
Fri April 04, 2014
High-Cap Multi-Ripper Bucket From Leading Edge Provides Maximum Breakout Force
Leading Edge Attachments Inc.’s high-cap multi-ripper bucket has been shown to replace hammers, blasting and rock trenchers. The HCMRB utilizes the “SHARC” (SHanks on an ARC) technology, meaning that the bucket functions similarly to that of a trencher except it uses the hydraulic excavator rolling action to rip, always providing the maximum breakout force, applied sequentially to each tooth....
Thu March 27, 2014
Newly Redesigned Edge Sod Unroller Attachment Saves Time and Money
CEAttachments Inc., a global supplier of attachments and accessories for compact equipment, has a re-designed Edge sod unroller attachment for skid steers and track loaders. The Edge sod unroller attachment has an enhanced, more cost-effective design that provides for more efficient operation and performance, saving landscape professionals time and money in labor, according to the manufacturer....
Tue March 18, 2014
Bobcat Planetary Augers Expand Lineup
Bobcat Company’s 35PH and 50PH planetary drive augers are compatible with approved models of Bobcat skid steer loaders, compact track loaders, all-wheel steer loaders and compact excavators. Expanding the lineup of Bobcat augers, these units are designed with a high-torque gearbox, allowing them to deliver more power for difficult installations at deeper digging depths and for working in tough conditions such as rock, clay, coral and frost....
Mon February 10, 2014
CEAttachments Introduces Three New Edge Backhoes and Buckets
CEAttachments Inc., a global supplier of attachments and accessories for compact equipment, has three new Edge backhoes and buckets for skid steer and track loaders. The new models feature a new mono-block style valve with higher rated spool seals to prevent valve leakage from high back pressure....
Fri January 31, 2014
JRB Roll-Out Bucket Increases Wheel Loader Dump Height
Paladin Attachments's JRB roll-out bucket for wheel loaders improves the dumping height ability of any loader, making it easier to clear 13 ft. 6 in. (4 m) haul trailers while significantly increasing the productivity of single-side filling operations, according to the manufacturer....
Mon January 20, 2014
The V-Raptor Bucket from Leading Edge Attachments
The “V-Raptor Bucket” from Leading Edge Attachments Inc. is a ripper/bucket combination for excavators and backhoes that allows the operator to rip rock, coral or frozen ground with the maximum breakout force, pry out and carry stumps or cradle boulders, rip a clean narrow V trench for laying utilities, plus scoop and load material, allowing the operator to own a ripper plus be able to scoop and remove ripped debris without requiring the tool or machine change to use another bucket....
Tue January 14, 2014
National Attachments Returns to ConExpo
Since its conception in 1989, National Attachments' sole focus has been providing severe-duty, heavy equipment attachments for the demolition, construction, forestry, recycling and scrap industries. The company represents several manufacturers, including Nye, manufacturer of severe-duty grapples, pulverizers, processors, wood shears and stump harvesters....
Wed January 08, 2014
Leading Edge Attachments to Showcase Multi-DigNRip Bucket at ConExpo
The Leading Edge Attachments Inc.’s Multi-DigNRip bucket can replace hammers, blasting and rock trenchers, for a fraction of the cost, offered specifically for high production rip and load applications where a wider rock bucket is required....
