Manitowoc Unveils Product Verification Center

📅   Mon June 11, 2012 - National Edition
CEG


Management from Mainitowoc Cranes cut the ribbon to officially open the company’s Product Verification Center at its facility in Shady Grove, Pa.
Management from Mainitowoc Cranes cut the ribbon to officially open the company’s Product Verification Center at its facility in Shady Grove, Pa.
Management from Mainitowoc Cranes cut the ribbon to officially open the company’s Product Verification Center at its facility in Shady Grove, Pa. Jim MacIntyre, director of global quality systems of Manitowoc, gives a presentation to guests at the inaugurationof the PVC. The team from the PVC on one of the six test pads located outside the facility.

A crane can only be as good as the sum of its parts. That’s why Manitowoc Cranes has built a multimillion dollar, testing facility to rigorously scrutinize the components that go into its cranes.

The Product Verification Center at Manitowoc’s Shady Grove, Pa., facility will help produce stronger, more-reliable cranes. By allowing rigorous testing of component performance and working life cycles, it will give Manitowoc engineers new insight into the anticipated performance of cranes in the field. It also will speed up the product development phase for new designs, reduce warranty claims and on-site stoppages, and allow for the direct comparison of supplier components, according to the manufacturer.

Eric Etchart, Manitowoc’s president and general manager, said the Product Verification Center represents an investment in quality.

“For Manitowoc and its customers, this new center marks the beginning of an exciting phase in modern crane design and testing,” he said. “By meticulously inspecting the quality and endurance of individual components, we will be able to reach new, unprecedented levels of quality. We believe there’s no other facility like this in the crane industry.”

The center features a number of technologies that will deliver detailed pictures of anticipated component performance. Among the most significant are:

• A severe environment test (HALT) chamber that can mimic extreme temperature swings and test component reaction to continuous vibration.

• A walk-in temperature and humidity chamber that’s large enough to fit entire crane cabs, consoles and power boxes.

• A four-channel structural test system with advanced feedback control.

• An electrical and software testing lab.

• Imaging systems for forensic analysis, including a thermal imaging camera and microscopes.

• A materials lab with a scanning electron microscope, flaw detector and hardness tester.

• A cyclic corrosion chamber, which recreates salt water exposure and fog conditions.

The Product Verification Center will test designs earlier in the product development process than was previously possible. That means suppliers and their components can be vetted before the products are placed in cranes. Also, the head start allows Manitowoc engineers to discover any potential difficulties at an earlier stage and devise solutions long before equipment reaches job sites.

Jim MacIntyre, director of global quality systems of Manitowoc, said the Product Verification Center is already improving crane performance.

“It’s still very early, but we’re already seeing some interesting results. For example, we recently used thermal imaging technology when analyzing engine performance on one of our industrial cranes. As a result, we adjusted the design to increase fuel economy and improve productivity,” he said. “In the future, we will be able to replicate this kind of innovation on a much bigger scale.”

Alan Calta, director of the Product Verification Center, leads a specially-trained staff of 41 managers, technicians and engineers. The team has fashioned a proprietary verification management system to organize, prioritize, summarize, compare and archive the center’s test results. Additionally, Manitowoc’s experts will be able to develop competitive standards for verification and processes in the future.

The new facility allows for the testing of entire cranes, too. Engineers are able to view cranes being tested on one of the center’s six test pads, for example, and monitor the results in real time. The center’s roof is tall enough to allow for the full extension of crane booms, so engineers can accurately re-create job site conditions.

The Product Verification Center took less than a year to build with an aggressive schedule and major push by key individuals from Manitowoc’s plant operations, engineering and purchasing teams. The biggest challenge was recruiting talent for a team that could meet the heavy demands of the product verification requirements.

Manitowoc started researching and planning for the center in 2009 as part of its commitment to continuous quality improvement. The company discovered that many of its suppliers weren’t able to test their own products and when they did, the measurements were often incomplete. Driven by the desire to understand as much as possible about each component that goes into a Manitowoc crane, the company decided it should create its own verification facility.

For more information, visit www.manitowoc.com.