Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Tue November 15, 2011 - National Edition
RexCon’s Mobile 12 SE is now available with a 12 cu. yd. (9 cu m) accumulative style batcher with a 66 ton (60 t) — four compartment aggregate bin with fold up sides.
The Mobile 12 SE is a “job site” portable batch plant, which can be physically erected in 20 minutes without a crane. The back of the batch plant can be hydraulically raised to quickly release the running gear. Once sitting on the ground, the cement section is hydraulically raised to a charging height of 14 ft. (4 m) for loading front or rear discharge mixer trucks.
No concrete slabs or steel plating required when setting up, as the Mobile 12 SE lower frame runs the entire length of the batch plant and sits flatly on the ground.
The accumulative batcher provides even greater flexibility for the Mobile 12 SE. Instead of the 66 ton aggregate bin, a 135 ton (122 t) — three compartment portable AGG bin can be mounted over the top of the batcher for greater material storage.
This AGG bin is reversible, which allows material handling conveyors to be accessed from either side or the back of the batch plant.
Two 150 barrel cement storage bins with 12 in. (30.5 cm) diameter screws and 40 hp (30 kW) drives feed a gravity 12 cu. yd. (9 cu m) cement batcher. The Mobile 12 SE comes standard with a 36 in. (91 cm) batch belt, and a 20 hp (15 kW) air compressor.
The Mobile 12 SE also has decumulative style batchers available which provides a low profile for ramping with a front end loader. The Mobile 12 SE(CM) features a portable 12 cu. yd. tilt drum for central mix and paving applications.
For more information, visit www.rexcon.com.