Roadtec’s RX-400 4-ft. (1.2 m) cold planer design allows contractors to cut as narrow as 26 in. (66 cm) with improved evacuation of material from the cutter housing.

Material evacuation is efficient enough to allow cutting depth up to 12.5 in. (32 cm), even in clog-prone, loose material.

The RX-400 conveyor and cutter housing design allows the 26-in. (66 cm) wide drum section “visibility” of the conveyor for better material flow. The conveyor and cutter housing design of the RX-400 solves the significant tooth and tooth holder wear problem often encountered with other designs. These problems result from poor material evacuation in the cutter housing and the fact that too much milled up material gets churned in the housing, wearing out components.

Moreover, better material flow through the cutter housing makes operating the machine much more efficient.

The RX-400 cold planer features a 325-hp (242 kW) Caterpillar C9 Acert engine, and a maximum operating speed of 172 ft. (52 m) per minute.

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Muddy Water Dredging Christens Marlin Class Dredge

Indiana Officials Mark Start of 2024 Construction Season, Promote Safety

Leica Geosystems Launches its First Machine Smart Antenna — Leica iCON gps 120