Terex TL210 Features Modified Tool Carrier Linkage

Wed April 09, 2008 - National Edition
CEG



The new Terex TL210 compact wheel loader has similar features and characteristics to the company’s TL260 compact wheel loader, including a spacious operating cab, a heavy-duty chassis and the Terex cooling system with reversible fan. This new wheel loader also features Tier III engine compliance, modified tool carrier linkage, and powerful operation.

With a 162-hp (121 kW) quiet, low-vibration Cummins diesel engine, the TL210 meets the latest Tier III/COM III emission standards. For the first time in the Terex mid-sized wheel loader range, the power transmission in the hydrostatic drive unit of the TL210 is carried out via a hydrotransmatic transmission with two regulating motors and a pump. In the entire speed range between 0 to 25 mph (0 to 40 kmh), the traction force and speed are optimized automatically and without interruption. The temperature efficiency of the load-limit controlled drive unit is well-adjusted and optimized, according to the manufacturer.

The loading system on the new TL210 wheel loader is equipped with Terex modified tool carrier linkage. This combines the advantages of Z kinematics — powerful breakout force, bucket reaction force and unloading time — with the parallel control of the parallel kinematics in the bucket and fork lift attachment, across the entire movement range. The lifting force on the ground is 27,740 lbs. (123.4 KN) and the breakout force of the bucket cutting edge achieves 23,830 lbs. (106 KN).

The discharge height on the Terex TL210 of 9 ft. 11 in. (3 m) at an angle of 45 degrees is an advantage for applications in recycling plants, mixing plants, timber processing, paper plants and the agriculture industry, according to the manufacturer. The 8 ft. 2 in. (2.5 m) wide, 10 ft. 8 in. (3.3 m) high TL210 compact wheel loader moves a payload of 8,699 lbs. (3,945 kg) direct mounted with a 2.75 cu. yd. (2.1 cu m) bucket. Payload over the entire lift and steering range for forks is 9,921 lbs. (4,500 kg).

The radiator system features a wire screen installed in front of the high-volume cooler to protect from grit. For system cleaning and to remove fine grit, the fan automatically and periodically switches to “reverse” so that the system is cleared out, requiring less maintenance. It also has the air intake located in the dust-free zone behind the driver’s cab.

Due to load-sensing hydraulics by Rexroth with load-independent flow distribution, the operating cycles are smooth, non-jolting and powerful; rapid steering movements are possible even at low engine revolutions, according to the manufacturer.

The cab of the new Terex TL210 compact wheel loader offers the operator’s view through tinted windows to provide enhanced visibility. The spacious cab on this new unit incorporates ergonomic features including an accessible two-door entry system, an operator’s seat with hydraulic shock absorption and standard air conditioning.

For more information, visit www.terex.com.