Description:
Conveyor, - Main conveyor 36” x 80’ [914mm x 24.4m]; 52” [1,321mm], deep frame, - Stinger Conveyor 36” x 60’ [914mm x 18.3m]; 36” [914mm], deep frame, - Extension – conveyor extends from 80’ [24.4m] to 136’, [41.5m] overall length, Idlers, - CEMA B – 5” [127mm] diameter, 3 roll, 35-degree, troughing idlers on 4’ [1.2m] spacing with close-spaced, 20-degree idlers at feed point, 8’ [2.4m] spacing on flat, steel return idlers, Belt, - 2 ply 220 PIW, 3/16” x 1/16” [4.8mm x 1.6mm] covers with, mechanical fasteners, Power, - 850 TPH [771 MTPH] maximum capacity (100 pcf [1.3 ton, per cubic meter] material). 1,000 TPH [907 MTPH] upgrade, available. Class I Dodge® shaft mount gear reducers with, backstops. 3/60/230-460 TEFC electric motors. V-belts,, motor mounts and guards, Under Carriage, - Heavy-duty V-type with hydraulic powered twin cylinder, raise, and cylinder covers, - Axle – gullwing type axle assembly. Includes walking, beam travel axle with eight (8) 11-22.5 tires for road, transport. Also includes four (4) fold-down 385/65D-19.5, tires for radial travel. Hydraulic cylinders are an option, - Dual hydraulic planetary power travel drives, 4-wheel drive, is an option, - Cam-arm style rear undercarriage, to maintain constant, wheel radius when raising and lowering the conveyor, - Center heavy-duty tow eye, - Kingpin, air brakes, travel, brake and directional lights and, mudflaps, Receiving Trough and Radial Hopper, - Rock box style hopper – 5’ 6” [1.7m] long trough with, adjustable rubber flashing, Anchor Pivot, - Heavy-duty anchor pivot plate, Telescoping Travel, - Hydraulic powered winch mounted at the tail end of the, main conveyor with ¾” [19mm] wire rope cable, Hydraulics, - 10hp [7.5kW] electric/hydraulic power pack to operate, undercarriage lift, power travel drives, and hydraulic winch, for telescoping the conveyor. Includes all hydraulic tubing,, hoses, gauges, filter and control valves, Wizard Touch® Automation, - Wizard Touch® Automation is an automated stockpiling, control system with an easy-to-use touch screen interface, that allows the user to take advantage of preprogrammed, stockpiling capabilities. Includes capabilities for building, radial continuous, radial conical, and inline continuous, stockpiles, Electrical, - NEMA 4 enclosure with main disconnect, mounted on, the rear undercarriage member; all starters and wiring to, motors; start/stop pushbuttons for main conveyor motor,, stinger conveyor motor, hydraulic power pack motor; cord, holders and supports for power cable; LESS power cable –, 460 volt, 3 phase, 60 hertz power required
