Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $71,300.00 USD
Apply for Financing
| Hours: | 4937 |
| Serial Number: | HWC04485 |
| Machine Location: | CAMBRIDGE, ON |
| More Information: | https://catused.com/cu/10277401 |
Supplied by HeavyEquipmentData.com →
| Dimensions | |
| Height | 12 ft (4 m) |
| Length | 23 ft (7 m) |
| Weight | 24,251 lbs (11,000 kg) |
| Width | 8 ft (2 m) |
| General Specifications | |
| 1) Overall transport length (Since 2016) | 281 in (7,133 mm) |
| 10) Maximum bucket rollback at ground level (Since 2016) | 38 deg |
| 11) Digging depth (Since 2016) | 4 in (110 mm) |
| 12) Grill to bucket cutting edge, carry position (Since 2016) | 57 in (1,451 mm) |
| 13) Maximum operating height (Since 2016) | 192 in (4,878 mm) |
| 1st (Since 2016) | 5 3 |
| 2) Overall transport height S-stick (Since 2016) | 141 in (3,577 mm) |
| 2nd (Since 2016) | 9 6 |
| 3) Height to top of cab/canopy (Since 2016) | 111 in (2,819 mm) |
| 3rd (Since 2016) | 21 13 |
| 4) Height to top of exhaust stack (Since 2016) | 108 in (2,744 mm) |
| 4th (Since 2016) | 38 24 |
| 5) Rear axle centerline to front grill (Since 2016) | 106 in (2,705 mm) |
| 6) Wheelbase (2WD/AWD) (Since 2016) | 87 in (2,200 mm) |
| 7) Maximum hinge pin height (Since 2016) | 137 in (3,474 mm) |
| 8) Dump angle at full height (Since 2016) | 44 deg |
| 9) Dump reach at maximum angle (Since 2016) | 28 in (716 mm) |
| Backhoe - 14) Digging depth, SAE (maximum) (Since 2019) | 171 in (4,350 mm) |
| Backhoe - 15) Digging depth, 610 mm (2'0") flat bottom (Since 2019) | 170 in (4,311 mm) |
| Backhoe - 16) Reach from swing pivot at ground line (Since 2019) | 221 in (5,612 mm) |
| Backhoe - 17) Loading reach (Since 2019) | 73 in (1,842 mm) |
| Backhoe - 18) Stabilizer spread, operating position (center of pad) (Since 2019) | 130 in (3,310 mm) |
| Backhoe - 19) Stabilizer spread, operating position (outside edge of pad) (Since 2019) | 148 in (3,770 mm) |
| Backhoe - Bucket dig force (Since 2019) | 14,431 lbf (64 kN) |
| Backhoe - Bucket rotation (Since 2019) | 205 deg |
| Backhoe - Loading height (Since 2019) | 143 in (3,642 mm) |
| Backhoe - Maximum operating height (Since 2019) | 217 in (5,522 mm) |
| Backhoe - Reach from rear axle centerline at ground line (Since 2019) | 264 in (6,702 mm) |
| Backhoe - Stabilizer spread, transport position (Since 2019) | 91 in (2,322 mm) |
| Backhoe - Stick dig force (Since 2019) | 9,781 lbf (44 kN) |
| Backhoe - Swing arc (Since 2019) | 180 deg |
| Backhoe Loading Height (Since 2015) | 12 ft (4 m) |
| Bore (Since 2016) | 4 in (105 mm) |
| Bucket jaw clamping force (Since 2016) | 12,521 lbf (56 kN) |
| Capacity (SAE) rated (Since 2016) | 2 cu yd (1 cu m) |
| Dump height at maximum angle (Since 2016) | 110 in (2,798 mm) |
| Engine Displacement (Since 2016) | 268 cu in (4 L) |
| Engine Model (Since 2016) | C4.4 ACERT 3054C |
| Flywheel Power - Gross - Tier 2/Stage II/Japan 2001 (Tier 2) equivalent (Since 2016) | 99 hp (74 kW) |
| Flywheel Power - Gross - Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent (Since 2016) | 101 hp (75 kW) |
| Flywheel Power - Gross - Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) (Since 2016) | 100 hp (74 kW) |
| Flywheel Power - Net - Tier 2/Stage II/Japan 2001 (Tier 2) equivalent (Since 2016) | 95 hp (71 kW) |
| Flywheel Power - Net - Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent (Since 2016) | 95 hp (71 kW) |
| Flywheel Power - Net - Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) (Since 2016) | 94 hp (70 kW) |
| Front wheel tread gauge (Since 2016) | 75 in (1,895 mm) |
| Fuel Tank Capacity (Since 2016) | 42 US gal (160 L) |
| Ground clearance (485 kg/ 1170 lb counterweight) (Since 2016) | 11 in (274 mm) |
| Ground clearance (AWD guard) (Since 2016) | 12 in (294 mm) |
| Ground clearance (LH step) (Since 2016) | 12 in (294 mm) |
| Hydraulic System, closed center (Since 2016) | Load Sensing, Flow Sharing |
| Jaw opening maximum (Since 2016) | 31 in (790 mm) |
| Lift breakout force (Since 2016) | 10,629 lbf (47 kN) |
| Lift capacity at maximum height (Since 2016) | 6,511 lbs (2,953 kg) |
| Loader Breakout Force (Since 2015) | 11,283 lbs (5,118 kg) |
| Loader Lift Capacity (Since 2015) | 3,168 lbs (1,437 kg) |
| Loader SAE (Since 2015) | 93 hp (69 kw) |
| Machine Dimensions - 1) Overall transport length (Since 2017) | 281 in (7,133 mm) |
| Machine Dimensions - 2) Overall transport height S-stick (Since 2017) | 141 in (3,577 mm) |
| Machine Dimensions - 3) Height to top of cab/canopy (Since 2017) | 111 in (2,819 mm) |
| Machine Dimensions - 4) Height to top of exhaust stack (Since 2017) | 108 in (2,744 mm) |
| Machine Dimensions - 5) Rear axle centerline to front grill (Since 2017) | 106 in (2,705 mm) |
| Machine Dimensions - 6) Wheelbase (2WD/AWD) (Since 2017) | 87 in (2,200 mm) |
| Machine Dimensions - Front wheel tread gauge (Since 2017) | 75 in (1,895 mm) |
| Machine Dimensions - Ground clearance (485 kg/ 1170 lb counterweight) (Since 2017) | 11 in (274 mm) |
| Machine Dimensions - Ground clearance (AWD guard) (Since 2017) | 12 in (294 mm) |
| Machine Dimensions - Ground clearance (LH step) (Since 2017) | 12 in (294 mm) |
| Machine Dimensions - Overall length (Since 2017) | 278 in (7,059 mm) |
| Machine Dimensions - Overall transport height E-stick (Since 2017) | 143 in (3,631 mm) |
| Machine Dimensions - Overall width (Since 2017) | 91 in (2,322 mm) |
| Machine Dimensions - Rear wheel tread gauge (Since 2017) | 67 in (1,714 mm) |
| Max Digging Depth (Since 2015) | 14 ft (4 m) |
| Maximum grading angle (Since 2016) | 116 deg |
| Net Torque Rise at 1400 rpm - Tier 2/Stage II/Japan 2001 (Tier 2) equivalent (Since 2016) | 31 % |
| Net Torque Rise at 1400 rpm - Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent (Since 2016) | 32 % |
| Net Torque Rise at 1400 rpm - Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) (Since 2016) | 46 % |
| No. of Cylinders (Since 2016) | 4 |
| Operating Weight (Since 2015) | 17,033 lbs (7,726 kg) |
| Operating Weight (Since 2018) | 17,033 lbs (7,726 kg) |
| Operating Weight (Since 2019) | 17,033 lbs (7,726 kg) |
| Overall length (Since 2016) | 278 in (7,059 mm) |
| Overall transport height E-stick (Since 2016) | 143 in (3,631 mm) |
| Overall width (Since 2016) | 91 in (2,322 mm) |
| Performance - 10) Maximum bucket rollback at ground level (Since 2017) | 38 deg |
| Performance - 11) Digging depth (Since 2017) | 4 in (110 mm) |
| Performance - 12) Grill to bucket cutting edge, carry position (Since 2017) | 57 in (1,451 mm) |
| Performance - 12) Grill to bucket cutting edge, carry position (Since 2019) | 63 in (1,597 mm) |
| Performance - 13) Maximum operating height (Since 2017) | 192 in (4,878 mm) |
| Performance - 13) Maximum operating height (Since 2019) | 176 in (4,477 mm) |
| Performance - 7) Maximum hinge pin height (Since 2017) | 137 in (3,474 mm) |
| Performance - 8) Dump angle at full height (Since 2017) | 44 deg |
| Performance - 9) Dump reach at maximum angle (Since 2017) | 28 in (716 mm) |
| Performance - 9) Dump reach at maximum angle (Since 2019) | 34 in (868 mm) |
| Performance - Bucket jaw clamping force (Since 2017) | 12,521 lbf (56 kN) |
| Performance - Capacity (SAE) rated (Since 2017) | 2 cu yd (1 cu m) |
| Performance - Dump height at maximum angle (Since 2017) | 110 in (2,798 mm) |
| Performance - Dump height at maximum angle (Since 2019) | 106 in (2,680 mm) |
| Performance - Jaw opening maximum (Since 2017) | 31 in (790 mm) |
| Performance - Jaw opening maximum Bucket jaw clamping force Weight (does not include teeth or forks) (Since 2017) | 1,087 lbs (493 kg) |
| Performance - Lift breakout force (Since 2017) | 10,629 lbf (47 kN) |
| Performance - Lift breakout force (Since 2019) | 11,415 lbf (51 kN) |
| Performance - Lift capacity at maximum height (Since 2017) | 6,511 lbs (2,953 kg) |
| Performance - Lift capacity at maximum height (Since 2019) | 8,117 lbs (3,682 kg) |
| Performance - Maximum grading angle (Since 2017) | 116 deg |
| Performance - Tilt breakout force (Since 2017) | 12,700 lbf (57 kN) |
| Performance - Tilt breakout force (Since 2019) | 10,371 lbf (46 kN) |
| Performance - Weight (does not include teeth or forks) (Since 2017) | 2,064 lbs (936 kg) |
| Performance - Weight (does not include teeth or forks) (Since 2019) | 1,060 lbs (481 kg) |
| Performance - Width (Since 2017) | 95 in (2,425 mm) |
| Performance - Width of dozer cutting edge (Since 2017) | 95 in (2,406 mm) |
| Performance - Width of dozer cutting edge 12) Grill to bucket cutting edge, carry position (Since 2017) | 61 in (1,525 mm) |
| Pump Capacity (Since 2016) | 40 US gpm (150 L/min) |
| Rated Engine RPM (Since 2016) | 2,200 rpm |
| Rear wheel tread gauge (Since 2016) | 67 in (1,714 mm) |
| Speeds (Auto-Shift) - 1st (Since 2016) | 6 4 |
| Speeds (Auto-Shift) - 2nd (Since 2016) | 9 6 |
| Speeds (Auto-Shift) - 3rd (Since 2016) | 12 7 |
| Speeds (Auto-Shift) - 4th (Since 2016) | 19 12 |
| Speeds (Auto-Shift) - 5th (Since 2016) | 23 14 |
| Speeds (Auto-Shift) - 5th LUC (if equipped) (Since 2016) | 25 15 |
| Speeds (Auto-Shift) - 6th (Since 2016) | 40 25 |
| Speeds (Auto-Shift) - 6th LUC (if equipped) (Since 2016) | 40 25 |
| Stroke (Since 2016) | 5 in (127 mm) |
| Tilt breakout force (Since 2016) | 12,700 lbf (57 kN) |
| Tires - 2WD Bias Front (Since 2016) | 12-16.5 10 PR F-3 |
| Tires - 2WD Bias Rear (Since 2016) | 19.5L-24 12 PR R-4 |
| Tires - AWD Bias Front (Since 2016) | 12.5/80-18 12 PR I-3 |
| Tires - AWD Bias Front, Flotation (Since 2016) | 12.5/80-18 12 PR I-3 |
| Tires - AWD Bias Rear (Since 2016) | 19.5L-24 12 PR R-4 |
| Tires - AWD Bias Rear, Flotation (Since 2016) | 21L-24 16 PR R-4 |
| Tires - AWD Combination Front (Since 2016) | 340/80R18 |
| Tires - AWD Combination Rear (Since 2016) | 19.5L-24 12 PR R-4 |
| Tires - AWD Radial Front (Since 2016) | 340/80R18 |
| Tires - AWD Radial Rear (Since 2016) | 500/70R24 |
| Travel Speed 4th Gear Fwd (Since 2015) | 25 mph (40 kph) |
| Turning Circle, Wall to Wall (Since 2016) | 432 in (11 m) |
| Weight (does not include teeth or forks) (Since 2016) | 2,064 lbs (936 kg) |
| Width (Since 2016) | 95 in (2,425 mm) |
| Width of dozer cutting edge (Since 2016) | 95 in (2,406 mm) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon