2006 Caterpillar 247B For Sale in Aurora, CO



For Sale: Call for Price


Wagner Equipment Co.

https://www.wagnerequipment.com


Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:10833
Serial Number:TMTL02611
Stock Number:481954
Machine Location:AURORA CO, 80011

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes - Some but machjine looks good
S.O.S. TakenNo
BumperGood
Cab or CanopyGood - Door closes ok but may need adjusted
CounterweightGood
Crankcase Guard / Battery BoxGood
Eng. Enclose Hood / StackGood - Looks fine
FendersGood
Fuel TankGood
Grab IronsGood
Main Frame WeldsGood
PaintFair - Looks good for year model
PlasticGood
Pre-Cleaner BowlGood
Radiator Grill & ShroudGood - Looks fine
Sheet MetalGood
SAFETY ITEMS
ROPSYes
Safety Decals In PlaceYes
HornGood
Parking BrakeGood
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmNo - Did not hear ir come on
Current O&MMNo
Current Parts ManualNo
Current Safety ManualNo
ROPS Certification PlateYes
Diesel Exhaust Fluid (DEF) Level - N/A
Fuel Level - 75% full
Notes - GAUGES, OPERATOR STATION, CONSOLE - All looks ok and workd only question is the hour meter and machine hours
Air ConditionerFair - Could not get it colder than it was outside at 45 degrees
Dash ConsoleGood
Door LatchesFair - Needs adjusted
EMS Panel / WarningsGood
Floor BoardsGood
GaugesGood
Glass/MirrorsFair - Door is ok small scratches
HeaterGood
Hydraulic ControlsGood
Interior LightsGood
MeterFair - unknown hours
Seat BeltFair
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersFair
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo - Replaced in 2016 not many hours on it
Water in OilNo
Anti-Freeze Color - red
Notes - ENGINE - Was replaced in 2016 less than 1,500 hours on it per customer
Oil Pressure (H/L/N) - ok
Smoke (B/D/L/W) - no
Air CleanersGood
Belts / PulleysGood
Engine SupportsGood
Exhaust / MufflerGood
Fuel Injection SystemGood
GovernorGood
Oil Filter Condition (CUT)Good
Overall Operating Condition - ENGINEGood - Was replaced in 2016 started good and ran fine
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Notes - COOLING SYSTEM - all looks fine
CoolersGood
FanGood
Fan DriveGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM - all seemed to work ok
AlternatorGood
Batteries / CablesGood
LightingGood
Pre-HeaterGood
StarterGood
WiringGood
TANDEMS/GEARS/BEARINGS/CHAINS
Front Torsion BarsGood
Lines / LinkagesGood
Operating ConditionGood
Rear Torsion BarsGood
Torsion AxlesGood
Travel ControlsGood
Travel MotorsGood
Travel PumpsGood
HYDRAULICS
Leaks - HYDRAULICSYes - LH lift cylider is wet around seal
Notes - HYDRAULICS - All worked ok
Filter Condition (CUT)Good
Hoses / LinesGood
Lift CylindersFair - L H lift cylinder is seeping at seal not running out oil just wet around it see picture
Overall Operating Condition - HYDRAULICSGood
Pump & ValvesGood
TankGood
Tilt CylinderGood
ATTACHMENTS / WORK TOOLS
Angle BroomNo
AugerNo
Cold PlanerNo
HammerNo
Lanscape TillerNo
Pick-up BroomNo
Stump GrinderNo
TrencherNo
Wheel SawNo
Other - Only has a front bucket
Overall Operating Condition - ATTACHMENTS / WORK TOOLSGood - Bucket ok has some play bit good for machine age and hours
BUCKET
Bucket Capacity - 72
Bucket S/N - N/A
Notes - BUCKET - Bucket looks good
Bucket BottomGood
Bucket LinkageGood
Bucket SidesGood
Cutting EdgesGood
Loader FrameGood
Loader Pins & BushingsGood
Quick CouplerGood
UNDERCARRIAGE
Notes - tracks look good
Notes - UNDERCARRIAGE - U/C looks fine machine is a clean unit for the age
Percentage Worn - 20% worn 80 % left
Track / Belt Width - 15.5 ?
IdlersGood - has some small abrasions
RollerGood - Have some cuts and wear not bad enough to need replacing has 1 new one R.H side
Roller FrameGood
SprocketGood - has some new drive busgings and bolts in drive basket
Track / Belt ConditionGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Do not know the hours machine does not look to have high hours Not sure if it had an hour meter issue


Specs from the manufacturer:

Dimensions
Clearance at Max Lift and Dump7 ft (2 m)
Ground Clearance11 in (27 cm)
Height - Top of Cab7 ft (2 m)
Length - with Bucket11 ft (3 m)
Length - without Bucket8 ft (3 m)
Reach at Max Lift and Dump2 ft (1 m)
Turning Radius from Center - inc bucket85 in (216 cm)
Turning Radius from Center - machine rear53 in (136 cm)
Width Over Tracks6 ft (2 m)
Engine
Aspirationturbocharged
Displacement134 cu in (0 m)
Engine Model3024C T
Gross Power62 hp (46 kw)
Net Power58 hp (43 kw)
Hydraulic System
Pump Flow16 gal/min (60 l/min)
Relief Valve Pressure3,336 psi
Loader
Breakout Force3,735 lbs (1,694 kg)
Operating Load1,951 lbs (885 kg)
Tipping Angle3906.6 °
Operating Specifications
1212 V V
8585 A
Cooling System Fluid Capacity3 gal (10 l)
Engine Oil Capacity2 gal (8 l)
Fuel Capacity17 gal (65 l)
Hydraulic System Fluid Capacity15 gal (55 l)
Max Speed - high range8 mph (12 kph)
Operating Weight6,667 lbs (3,024 kg)
Undercarriage
Ground Contact Area1,767 cu in (0 m)
Ground Pressure4 psi
Length of Track on Ground5 ft (2 m)

Dealer Contact Info:

Wagner Equipment Co.




Contact: Equipment Manager

Click for Phone Number