Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-11-12 Click here to place a bid
| Hours: | 1402 |
| Serial Number: | CAT0247BCTSL00562 |
| Machine Location: | CHICAGO, IL |
Supplied by HeavyEquipmentData.com →
| Cab | |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 9 in (22 cm) |
| Bucket Pin Height - Maximum Lift | 9 ft (3 m) |
| Clearance At Max Lift And Dump | 7 ft (2 m) |
| Clearance At Maximum Lift And Dump | 84 in (213 cm) |
| Departure Angle | 41 degrees |
| Ground Clearance | 10 in (25 cm) |
| Height - Top Of Cab | 7 ft (2 m) |
| Height To Top Of Cab | 7 ft (2 m) |
| Length - Track On Ground | 59 in (150 cm) |
| Length - With Bucket On Ground | 129 in (328 cm) |
| Length - Without Bucket | 99 in (251 cm) |
| Length With Bucket | 11 ft (3 m) |
| Length With Out Bucket | 8 ft (3 m) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 150 in (381 cm) |
| Maximum Reach - With Arms Parallel | 53 in (135 cm) |
| Overall Length - Track | 75 in (191 cm) |
| Rack Back Angle - Maximum Height | 82 degrees |
| Reach At Max Lift And Dump | 2 ft (1 m) |
| Reach At Maximum Lift/Dump | 25 in (64 cm) |
| Turn Radius From Center - Bucket | 82 in (208 cm) |
| Turn Radius From Center - Coupler | 52 in (132 cm) |
| Turn Radius From Center - Rear | 54 in (137 cm) |
| Turning Radius From Center - Inc Bucket | 82 in (210 cm) |
| Turning Radius From Center - Machine Rear | 54 in (138 cm) |
| Vehicle Width | 66 in (168 cm) |
| Width Over Tracks | 6 ft (2 m) |
| Engine | |
| Bore | 3 in (8 cm) |
| Displacement | 134 cu in (2,196 cu cm) |
| Engine Make | 2,236 |
| Engine Model | Cat C2.2 T |
| Gross Power | 62 hp (46 kw) |
| Gross Power - Sae J1995 | 62 hp (46 kw) |
| Net Power | 56 hp (42 kw) |
| Net Power - Iso 9249 Eec | 56 hp (42 kw) |
| Net Power - Sae 1349 | 56 hp (42 kw) |
| Stroke | 4 in (10 cm) |
| General Specifications | |
| A Height to top of ROPS (Since 2012) | 78 in (1,990 mm) |
| Approx. Machine Weight (Since 2010) | 6,997 lbs (3,174 kg) |
| B Length to coupler (Since 2012) | 99 in (2,518 mm) |
| Blade surface height at level lift arms (Since 2012) | 56 in (1,419 mm) |
| Blade surface height at minimum lift (Since 2012) | 4 in (106 mm) |
| Bore (Since 2012) | 3 in (84 mm) |
| Breakout force - lift (Since 2012) | 2,829 lbf (1,283 kg) |
| Breakout force - lift (Since 2013) | 2,829 lbf (13 kN) |
| Breakout force - lift (Since 2015) | 2,794 lbf (12 kN) |
| Breakout force - tilt (Since 2012) | 3,548 lbf (1,609 kg) |
| Breakout force - tilt (Since 2013) | 3,548 lbf (16 kN) |
| Breakout force - tilt (Since 2015) | 3,574 lbf (16 kN) |
| Bucket overall width with edge (Since 2012) | 78 in (1,730 mm) |
| Bumper overhang from axle (Since 2012) | 22 in (576 mm) |
| C Length with bucket on ground (Since 2012) | 129 in (3,285 mm) |
| Carriage height above blade top (Since 2012) | 36 in (924 mm) |
| Carriage overall width without step (Since 2012) | 46 in (1,159 mm) |
| Carriage step additional width (Since 2012) | 4 in (108 mm) |
| Clearance at maximum lift/level bucket (Since 2012) | 105 in (2,668 mm) |
| D Maximum overall height (Since 2012) | 150 in (3,799 mm) |
| Dig depth with level bucket (Since 2012) | 1 in (13 mm) |
| Displacement (Since 2012) | 134 cu in (2 L) |
| Dump (Since 2013) | 2 |
| Dump clearance at maximum lift/dump (Since 2012) | 81 in (2,066 mm) |
| Engine Model (Since 2010) | Cat C2.2T |
| F Departure angle (Since 2012) | 41 deg |
| Floor angle at maximum lift/dump (Since 2013) | 41 deg |
| Floor angle at maximum lift/rack back (Since 2013) | 96 deg |
| Flywheel Power: Gross (Since 2013) | 62 hp (46 kW) |
| Flywheel Power: Net (Since 2012) | 56 hp (42 kW) |
| Front clearance circle radius (with bucket) (Since 2012) | 85 in (2,152 mm) |
| Front clearance circle radius (with bucket) (Since 2015) | 87 in (2,213 mm) |
| Fuel Tank Capacity (Since 2012) | 16 US gal (62 L) |
| G Wheelbase (Since 2012) | 59 in (1,499 mm) |
| Gross (Since 2012) | 62 hp (46 kW) |
| Ground clearance (Since 2012) | 10 in (267 mm) |
| Ground Pressure (Since 2012) | 4 psi |
| H Hinge pin height at carry position (Since 2012) | 9 in (220 mm) |
| Height to Top of Cab (Since 2010) | 78 in (1,990 mm) |
| Hinge pin height at maximum lift (Since 2012) | 113 in (2,862 mm) |
| Hydraulic Cycle Time, Empty Bucket - Dump (Since 2012) | 2 sec |
| Hydraulic Cycle Time, Empty Bucket - Lower (Empty, Float Down) (Since 2012) | 3 sec |
| Hydraulic Cycle Time, Empty Bucket - Raise (Since 2012) | 3 sec |
| Hydraulic Cycle Time, Empty Bucket - Total (Since 2012) | 8 sec |
| Hydraulic Pump Capacity (Since 2012) | 16 US gpm (61 L/min) |
| Hydraulic System Capacity (includes tank) (Since 2012) | 15 US gal (55 L) |
| Hydraulic Tank Capacity (Since 2012) | 9 US gal (35 L) |
| J Clearance at maximum lift/dump (Since 2012) | 84 in (2,134 mm) |
| K Floor angle at maximum lift/dump (Since 2012) | 40 deg |
| L Floor angle at maximum lift/rack (Since 2012) | 82 deg |
| Length to Coupler (Since 2010) | 99 in (2,518 mm) |
| Lower (Empty, Float Down) (Since 2013) | 3 |
| M Clearance at maximum lift/level (Since 2012) | 104 in (2,667 mm) |
| Maximum floor angle at carry position (Since 2012) | 28 deg |
| Maximum floor angle at minimum lift (Since 2013) | 25 deg |
| Maximum overall height (Since 2012) | 152 in (3,872 mm) |
| N Hinge pin height at maximum lift (Since 2012) | 112 in (2,862 mm) |
| Net Power (Since 2010) | 56 hp (42 kW) |
| No. Cylinders (Since 2012) | 4 |
| O Reach at level lift arm/bucket (Since 2012) | 55 in (1,339 mm) |
| One Speed Forward (Since 2012) | 0 - 7 mph |
| One Speed Reverse (Since 2012) | 0 - 8 mph |
| Operating Capacity - 50% Tipping Load (Since 2012) | 2,150 lb |
| Operating weight (Since 2012) | 6,911 lbs (3,134 kg) |
| Overall length at minimum lift, level tine (Since 2012) | 142 in (3,601 mm) |
| Overall length with bucket on ground (Since 2012) | 133 in (3,386 mm) |
| Product Identification Prefix (Since 2010) | MTL |
| Raise (Since 2013) | 3 |
| Rated bucket capacity (Since 2012) | 0 cu yd (0 cu m) |
| Rated Engine RPM (Since 2012) | 3,000 rpm |
| Rated operating capacity (Since 2012) | 2,150 lbs (975 kg) |
| Rated Operating Capacity at 50% (Since 2010) | 2,150 lbs (975 kg) |
| Reach at level lift arm/bucket (Since 2012) | 59 in (1,497 mm) |
| Reach at maximum lift/dump (Since 2012) | 28 in (702 mm) |
| Shank front face reach at level lift arms (Since 2012) | 32 in (802 mm) |
| Shank front face reach at maximum height (Since 2012) | 15 in (373 mm) |
| Shank front face reach at minimum lift (Since 2012) | 15 in (392 mm) |
| Stroke (Since 2012) | 4 in (100 mm) |
| Struck capacity (Since 2012) | 0 cu yd (0 cu m) |
| Tipping load (Since 2012) | 3,400 lbs (1,542 kg) |
| Total (Since 2013) | 8 |
| Tread Width (per side) (Since 2012) | 15 in (381 mm) |
| Two Speed Reverse Hydraulic Cycle Time, Empty Bucket (Since 2013) | - Seconds |
| Width (Since 2012) | 75 in (1,902 mm) |
| Width over Tracks (Since 2010) | 66 in (1,676 mm) |
| Width Over Tracks (Since 2012) | 66 in (1,676 mm) |
| Width over Tracks (Since 2014) | 66 in (1,676 mm) |
| Width Over Tracks (Since 2015) | 66 in (1,676 mm) |
| Hydraulic | |
| Pump Flow | 16 gpm (61 lpm) |
| Relief Valve Pressure | 3,335 psi |
| Hydraulic System | |
| Hydraulic Flow | Standard |
| Hydraulic Power | 31 hp (23 kw) |
| Loader Hydraulic Flow | 16 gpm (61 lpm) |
| Loader Hydraulic Pressure | 3,335 psi |
| Loader | |
| Breakout Force | 4,060 lbs (1,842 kg) |
| Operating Load | 2,150 lbs (975 kg) |
| Tipping Angle | 4,299 degrees |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 4,060 lbs (1,842 kg) |
| Ground Contact Area | 1770 in2 |
| Ground Pressure | 4 psi |
| Rated Operating Capacities - 35% Tipping Load | 1,505 lbs (683 kg) |
| Rated Operating Capacities - 50% Tipping Load | 2,150 lbs (975 kg) |
| Tipping Load | 4,300 lbs (1,950 kg) |
| Operational | |
| Alternator Supplied Amperage | 85 amps |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Capacity | 3 gal (10 l) |
| Fuel Capacity | 17 gal (65 l) |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed - Low Range | 7 mph (11 kph) |
| Operating Voltage | 12 V |
| Operating Weight | 6,997 lbs (3,174 kg) |
| Power Train | |
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
| Service Refill Capacities | |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 17 gal (64 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
| Undercarriage | |
| Ground Contact Area | 1770 in2 |
| Ground Pressure | 4 psi |
| Length Of Track On Ground | 5 ft (2 m) |
| Weights | |
| Operating Weight | 6,997 lbs (3,174 kg) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon