Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $31,900.00 USD
Apply for Financing
| Stock Number: | 40405 |
| Machine Location: | CHARLESTON , SC |
Supplied by HeavyEquipmentData.com →
| Cab | |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
| Clearance At Max Lift And Dump | 7 ft (2 m) |
| Clearance At Maximum Lift And Dump | 88 in (224 cm) |
| Departure Angle | 35 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height - Top Of Cab | 7 ft (2 m) |
| Height To Top Of Cab | 7 ft (2 m) |
| Length - Track On Ground | 59 in (150 cm) |
| Length - With Bucket On Ground | 135 in (343 cm) |
| Length - Without Bucket | 107 in (272 cm) |
| Length With Bucket | 11 ft (3 m) |
| Length With Out Bucket | 9 ft (3 m) |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 152 in (386 cm) |
| Maximum Reach - With Arms Parallel | 53 in (135 cm) |
| Overall Length - Track | 79 in (201 cm) |
| Rack Back Angle - Maximum Height | 87 degrees |
| Reach At Max Lift And Dump | 2 ft (1 m) |
| Reach At Maximum Lift/Dump | 29 in (74 cm) |
| Turn Radius From Center - Bucket | 86 in (218 cm) |
| Turn Radius From Center - Coupler | 55 in (140 cm) |
| Turn Radius From Center - Rear | 58 in (147 cm) |
| Turning Radius From Center - Inc Bucket | 86 in (217 cm) |
| Turning Radius From Center - Machine Rear | 58 in (147 cm) |
| Vehicle Width | 66 in (168 cm) |
| Width Over Tracks | 6 ft (2 m) |
| Engine | |
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | 2,236 |
| Engine Model | Cat C3.4T |
| Gross Power | 74 hp (55 kw) |
| Gross Power - Sae J1995 | 74 hp (55 kw) |
| Net Power | 71 hp (53 kw) |
| Net Power - Sae 1349 | 71 hp (53 kw) |
| Stroke | 5 in (12 cm) |
| General Specifications | |
| 259B3 - Breakout force - lift (Since 2012) | 4,149 lbf (1,882 kg) |
| 259B3 - Breakout force - tilt (Since 2012) | 3,920 lbf (1,778 kg) |
| 259B3 - Operating weight (Since 2012) | 8,924 lbs (4,048 kg) |
| A Height to top of ROPS (Since 2012) | 78 in (1,986 mm) |
| Approx. Machine Weight (Since 2010) | 8,934 lbs (4,052 kg) |
| B Length to coupler (Since 2012) | 106 in (2,722 mm) |
| Blade surface height at level lift arms (Since 2012) | 57 in (1,440 mm) |
| Blade surface height at maximum height (Since 2012) | 114 in (2,895 mm) |
| Blade surface height at maximum height (Since 2013) | 114 in (2,895 mm) |
| Blade surface height at minimum lift (Since 2012) | 4 in (91 mm) |
| Bore (Since 2012) | 4 in (94 mm) |
| Breakout force - lift (Since 2013) | 4,149 lbf (18 kN) |
| Breakout force - tilt (Since 2013) | 3,920 lbf (17 kN) |
| Bucket overall width with edge (Since 2012) | 68 in (1,730 mm) |
| Bumper overhang from axle (Since 2012) | 28 in (699 mm) |
| C Length with bucket on ground (Since 2012) | 135 in (3,432 mm) |
| Carriage height above blade top (Since 2012) | 36 in (924 mm) |
| Carriage overall width without step (Since 2012) | 46 in (1,159 mm) |
| Carriage step additional width (Since 2012) | 4 in (108 mm) |
| Clearance at maximum lift/level bucket (Since 2012) | 111 in (2,830 mm) |
| D Maximum overall height (Since 2012) | 150 in (3,872 mm) |
| Dig depth with level bucket (Since 2012) | 0 in (3 mm) |
| Displacement (Since 2012) | 201 cu in (3 L) |
| Dump clearance at maximum lift/dump (Since 2012) | 88 in (2,235 mm) |
| Dump clearance at maximum lift/dump (Since 2013) | 88 in (2,235 mm) |
| Engine Model (Since 2010) | Cat C3.4 DIT |
| F Departure angle (Since 2012) | 35 deg |
| Floor angle at maximum lift/dump (Since 2013) | 50 deg |
| Floor angle at maximum lift/rack back (Since 2013) | 87 deg |
| Flywheel Power: Gross (Since 2013) | 74 hp (55 kW) |
| Flywheel Power: Net (Since 2012) | 71 hp (53 kW) |
| Front clearance circle radius (with bucket) (Since 2012) | 88 in (2,244 mm) |
| Fuel Tank Capacity (Since 2012) | 24 US gal (89 L) |
| G Wheelbase (Since 2012) | 59 in (1,495 mm) |
| Gross (Since 2012) | 74 hp (55 kW) |
| Ground clearance (Since 2012) | 10 in (267 mm) |
| Ground Pressure (Since 2012) | 6 psi |
| H Hinge pin height at carry position (Since 2012) | 8 in (195 mm) |
| Height to Top of Cab (Since 2010) | 78 in (1,986 mm) |
| Hinge pin height at maximum lift (Since 2012) | 120 in (3,046 mm) |
| Hydraulic Cycle Time, - Dump (Since 2012) | 2 sec |
| Hydraulic Cycle Time, - Lower (Empty, Float Down) (Since 2012) | 3 sec |
| Hydraulic Cycle Time, - Raise (Since 2013) | 4 sec |
| Hydraulic Cycle Time, - Total (Since 2012) | 9 sec |
| Hydraulic Pressure - High Flow/XPS (Since 2013) | 4,061 psi (28,000 kPa) |
| Hydraulic Pressure - Standard (Since 2013) | 3,335 psi (23,000 kPa) |
| Hydraulic Pump Capacity (Since 2012) | 22 US gpm (83 L/min) |
| Hydraulic Pump Capacity - High Flow/XPS (Since 2013) | 33 US gpm (125 L/min) |
| Hydraulic Pump Capacity - Standard (Since 2013) | 22 US gpm (84 L/min) |
| Hydraulic System Capacity (Since 2012) | 15 |
| Hydraulic System Capacity - (includes tank) (Since 2013) | 15 US gal (55 L) |
| Hydraulic Tank Capacity (Since 2012) | 9 US gal (35 L) |
| J Clearance at maximum lift/dump (Since 2012) | 88 in (2,243 mm) |
| K Floor angle at maximum lift/dump (Since 2012) | 50 deg |
| L Floor angle at maximum lift/rack (Since 2012) | 87 deg |
| Length to Coupler (Since 2010) | 107 in (2,722 mm) |
| M Clearance at maximum lift/level (Since 2012) | 112 in (2,854 mm) |
| Maximum floor angle at carry position (Since 2012) | 26 deg |
| Maximum floor angle at minimum lift (Since 2013) | 26 deg |
| Maximum Forward Speed (Since 2010) | 9 mph (14 km/h) |
| Maximum overall height (Since 2012) | 155 in (3,931 mm) |
| N Hinge pin height at maximum lift (Since 2012) | 120 in (3,046 mm) |
| Net Power (Since 2010) | 71 hp (53 kW) |
| No. Cylinders (Since 2012) | 4 |
| O Reach at level lift arm/bucket (Since 2012) | 53 in (1,338 mm) |
| One Speed Forward (Since 2012) | 0 - 6 mph |
| One Speed Reverse (Since 2012) | 0 - 6 mph |
| Operating Capacity - 50% Tipping Load (Since 2012) | 2,950 lb |
| Operating Weight (Since 2012) | 8,934 lb |
| Operating weight (Since 2013) | 8,924 lbs (4,048 kg) |
| Overall length at minimum lift, level tine (Since 2012) | 150 in (3,806 mm) |
| Overall length with bucket on ground (Since 2012) | 141 in (3,591 mm) |
| Product Identification Prefix (Since 2010) | YYZ |
| Rated bucket capacity (Since 2012) | 0 cu yd (0 cu m) |
| Rated Engine RPM (Since 2012) | 2,500 rpm |
| Rated operating capacity (Since 2012) | 2,919 lbs (1,324 kg) |
| Rated Operating Capacity at 50% (Since 2010) | 2,950 lbs (1,338 kg) |
| Reach at level lift arm/bucket (Since 2012) | 54 in (1,373 mm) |
| Reach at maximum lift/dump (Since 2012) | 32 in (803 mm) |
| Shank front face reach at level lift arms (Since 2012) | 29 in (742 mm) |
| Shank front face reach at maximum height (Since 2012) | 24 in (603 mm) |
| Shank front face reach at minimum lift (Since 2012) | 18 in (450 mm) |
| Stroke (Since 2012) | 5 in (120 mm) |
| Struck capacity (Since 2012) | 0 cu yd (0 cu m) |
| Tipping load (Since 2012) | 4,590 lbs (2,082 kg) |
| Two Speed Forward (Since 2012) | 0 - 9 mph |
| Two Speed Reverse (Since 2012) | 0 - 9 mph |
| Width (Since 2012) | 75 in (1,902 mm) |
| Width over Tracks (Since 2010) | 66 in (1,676 mm) |
| Hydraulic | |
| Pump Flow | 22 gpm (83 lpm) |
| Relief Valve Pressure | 3,335 psi |
| Hydraulic System | |
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow |
| Hydraulic Power | 43 hp (32 kw) |
| Hydraulic Power - Calculated | 60 hp (45 kw) |
| Loader Hydraulic Flow (1) | 22 gpm (83 lpm) |
| Loader Hydraulic Flow (2) | 31 gpm (117 lpm) |
| Loader Hydraulic Pressure | 3,335 psi |
| Loader | |
| Breakout Force | 4,509 lbs (2,045 kg) |
| Operating Load | 2,950 lbs (1,338 kg) |
| Tipping Angle | 5,900 degrees |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 4,508 lbs (2,045 kg) |
| Ground Contact Area | 1495 in2 |
| Ground Pressure | 6 psi |
| Rated Operating Capacities - 35% Tipping Load | 2,065 lbs (937 kg) |
| Rated Operating Capacities - 50% Tipping Load | 2,950 lbs (1,338 kg) |
| Rated Operating Capacity With Optional Counterweight | 3,000 lbs (1,361 kg) |
| Tipping Load | 5,900 lbs (2,676 kg) |
| Operational | |
| Alternator Supplied Amperage | 90 amps |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Capacity | 2 gal (9 l) |
| Fuel Capacity | 22 gal (84 l) |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed - High Range | 9 mph (14 kph) |
| Max Speed - Low Range | 6 mph (10 kph) |
| Operating Voltage | 12 V |
| Operating Weight | 9,226 lbs (4,185 kg) |
| Power Train | |
| Travel Speed Forward | 6 mph (10 kph) |
| Travel Speed Forward - 2-Speed | 9 mph (14 kph) |
| Travel Speed Reverse | 6 mph (10 kph) |
| Travel Speed Reverse - 2-Speed | 9 mph (14 kph) |
| Service Refill Capacities | |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 2 gal (9 l) |
| Fuel Tank | 22 gal (84 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
| Undercarriage | |
| Ground Contact Area | 1848 in2 |
| Ground Pressure | 5 psi |
| Length Of Track On Ground | 5 ft (2 m) |
| Width Of Track | 16 in (40 cm) |
| Weights | |
| Operating Weight | 8,934 lbs (4,052 kg) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon