2014 Caterpillar 259D has been sold

Detail photo of 2014 Caterpillar 259D from Construction Equipment Guide
Save Listing

MACHINE SOLD

Wheeler Machinery Co.
wheelercat.com


Click here to email
Wheeler Machinery Co..


801-974-0511
Sales Manager
801-974-0511

Hours: 1535

Serial Number: FTL02782

Stock Number: LKC01367U

Caterpillar 259D Description: EROPS, AIR CONDITIONER, HEATER / DEFROSTER, BUCKET, COUPLER, HYDRAULIC, AUXILIARY HYDRAULICS, HYDRAULICS, STANDARD FLOW, SELF LEVELING, PILOT CONTROL, LIGHTING, ULTRA LOW SULFUR DIESEL FUEL, AMICS, PRICED 07/17/17 CR, *259D CTL TIER 4 FINAL HRC, *PACKAGE, PERFORMANCE, (H2), *RUBBER BELT, 2 SPD, D/S IDLER, *ROPS, ENCLOSED WITH A/C (C3), *RADIO READY, *SEAT,AIR SUSPENSION,CLOTH,HEAT, *DISPLAY, ADVANCED, LCD, *HYDRAULICS, PROPORTIONAL, WT, *CONVERSION ARRANGEMENT, *QUICK COUPLER, ELECTRIC, *RIDE CONTROL, NONE, *DOOR, CAB, GLASS, *FAN, COOLING, DEMAND, *SEAT BELT, 2", *HEATER, ENGINE COOLANT, 120V, LANE 1 O



GENERAL APPEARANCE
S.O.S. TakenYes
Cleaning RequiredNo
Steps / LadderFair - The step at the front of the cab and the step at the bucket are both bent slightly. Leave.
Radiator Grill & ShroudGood
Cab or CanopyGood
Pre-Cleaner BowlGood
Grab IronsGood
Crankcase Guard / Battery BoxGood
Eng. Enclose Hood / StackPoor - The engine enclosure door is bent at the left side and binds on the frame. Leave.
Main Frame WeldsGood
PaintGood
Fuel TankGood
Sheet MetalFair - The left drive motor hose guard is bent. Leave.
BumperGood
SAFETY ITEMS
Safety Decals LegibleYes
ROPSYes
Safety Decals In PlaceYes
HornGood
Parking BrakeGood
GAUGES, OPERATOR STATION, CONSOLE
Seat Cushion / Arm RestGood
MeterGood
Seat BeltGood
Air ConditionerGood
Dash ConsoleGood
EMS Panel / WarningsGood
Floor BoardsGood
Hydraulic ControlsGood
Interior LightsGood
Windshield WipersFair - The wiper blade needs to be replaced. Replace.
SwitchesGood
GaugesGood
Door LatchesGood
Glass/MirrorsGood
HeaterGood
Current O&MMYes
Back Up AlarmYes
Current Safety ManualYes
Current Parts ManualNo
ROPS Certification PlateYes
Fuel Level - 70%
ENGINE
Fuel Injection SystemGood
Overall Operating ConditionGood
Turbocharger / BlowerGood
Air CleanersPoor - The outer air cleaner is packed full of dirt, they both should be replaced. Repalce inner and outer air filters
GovernorGood
Exhaust / MufflerGood
Engine SupportsGood
Belts / PulleysGood
Fluid Levels OK?Yes
EPA DecalYes
KnockingNo
Compression in RadiatorNo
Blow ByNo
Water in OilNo
Oil LeaksNo
Smoke (B/D/L/W) - Normal
Anti-Freeze Color - Red
Oil Pressure (H/L/N) - Normal
COOLING SYSTEM
LeaksNo
CoolersGood
Fan DriveGood
RadiatorGood
FanGood
Water PumpGood
HosesGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidNo
LightingFair - The right rear flood light does not work. Repair
WiringGood
Pre-HeaterGood
AlternatorGood
Batteries / CablesGood
StarterGood
TANDEMS/GEARS/BEARINGS/CHAINS
Travel ControlsGood
Lines / LinkagesGood
Torsion AxlesGood
Operating ConditionGood
Travel PumpsGood
Travel MotorsGood
HYDRAULICS
LeaksYes - There is oil around the pilot accumulator mount seal, it doesn't appear to be leaking now, possibly a leak that has been repaired and just needs to be cleaned. Clean off.
Pump & ValvesGood
Hoses / LinesFair - The suction hose at the left rear of the tank is leaking, the clamps need to be tightened. Tighten clamps.
TankGood
Lift CylindersGood
Tilt CylinderGood
Overall Operating ConditionGood
ATTACHMENTS / WORK TOOLS
Lanscape TillerNo
Wheel SawNo
Angle BroomNo
Pick-up BroomNo
HammerNo
AugerNo
Cold PlanerNo
Stump GrinderNo
TrencherNo
BUCKET
Bucket S/N - 273-5572
Bucket Capacity - 597 lbs
Cutting EdgesPoor - The cutting edge is worn out. Trun iff possible. Replace if required.
Bucket BottomPoor - The wear plates are worn out, the bucket is separated at the rear along the left side and worn very thin, the rear sheet metal is bent back and has a small crack. Leave.
Bucket SidesGood
Bucket LinkageGood
Quick CouplerGood
Loader Pins & BushingsGood
Loader FrameGood
UNDERCARRIAGE
Track / Belt Thickness - 2.365 thick the tread is 18 32nds.
Track / Belt Width - 15.5"
IdlersGood
Roller FrameGood
RollerGood
SprocketGood
Track / Belt ConditionFair - The tracks are coming apart at the inside where the rollers ride, and are slightly loose. Adjust as required.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
- Remove any customer decals.
- Perform 1000 HR service.
- Clean up machine real nice inside and out.


Dealer Contact Info:

Wheeler Machinery Co.

Click here for more information about Wheeler Machinery Co.

wheelercat.com
4901 West 2100 South
Salt Lake City UT , 84120
Ph: 801-974-0511


Phone: 801-974-0511

Contact: Sales Manager
Phone: 801-974-0511