Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $52,000.00 USD
Apply for Financing| Hours: | 2398 |
| Serial Number: | FTL16169 |
| Machine Location: | WINCHESTER, VA |
| More Information: | https://catused.com/cu/10023889 |
Supplied by HeavyEquipmentData.com →
| Air Conditioning System | |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab | |
| Fops | ISO 3449:2005 Level I |
| Fops Level Ii | ISO 3449:2005 Level II |
| Rops | ISO 3471:2008 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
| Bucket Pin Reach - Maximum Lift | 9 in (24 cm) |
| Clearance At Max Lift And Dump | 8 ft (2 m) |
| Clearance At Maximum Lift And Dump | 90 in (228 cm) |
| Departure Angle | 35 degrees |
| Dump Angle | 52 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height - Top Of Cab | 7 ft (2 m) |
| Height To Top Of Cab | 7 ft (2 m) |
| Length - Track On Ground | 59 in (150 cm) |
| Length - With Bucket On Ground | 137 in (349 cm) |
| Length - Without Bucket | 109 in (277 cm) |
| Length With Bucket | 11 ft (3 m) |
| Length With Out Bucket | 9 ft (3 m) |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 154 in (391 cm) |
| Maximum Reach - With Arms Parallel To Ground | 51 in (131 cm) |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Overall Height | 13 ft (4 m) |
| Overall Length - Track | 79 in (200 cm) |
| Overall Track Length | 7 ft (2 m) |
| Rack Back Angle - Maximum Height | 87 degrees |
| Reach - Maximum Lift/Dump | 24 in (61 cm) |
| Reach At Max Lift And Dump | 2 ft (1 m) |
| Turning Radius From Center - Bucket | 86 in (218 cm) |
| Turning Radius From Center - Coupler | 55 in (139 cm) |
| Turning Radius From Center - Machine Rear | 62 in (156 cm) |
| Vehicle Width (320 Mm/12.6 In Tracks) | 66 in (168 cm) |
| Vehicle Width (400 Mm/15.7 In Tracks) | 69 in (175 cm) |
| Engine | |
| Bore | 4 in (9 cm) |
| Displacement | 203 cu in (3,327 cu cm) |
| Engine Make | DIT |
| Engine Model | Cat C3.3B |
| Engine Model | Cat C3.3B DIT (turbo) |
| Gross Power | 74 hp (55 kw) |
| Gross Power - Sae J1995 | 74 hp (55 kw) |
| Net Power | 73 hp (55 kw) |
| Net Power - Iso 9249 | 74 hp (55 kw) |
| Net Power - Sae 1349 | 73 hp (55 kw) |
| Peak Torque | 196 lbs ft (265 nm) |
| Peak Torque - 1,500 Rpm - Sae J1995 | 195 lbs ft (264 nm) |
| Stroke | 5 in (12 cm) |
| Torque Measured @ | 1,500 rpm |
| General Specifications | |
| category (Since 2020) | COMPACT TRACK LOADERS |
| ENGINE POWER (Since 2016) | 73 hp (54 kw) |
| MODEL (Since 2016) | 259D |
| OPERATING LOAD (Since 2016) | 2,900 lbs (1,315 kg) |
| OPERATING WIDTH (Since 2016) | 66 / 69 |
| RATED OPERATING CAPACITY (35%) (Since 2020) | 2,030 lbs (921 kg) |
| RATED OPERATING CAPACITY (50%) (Since 2019) | 2,030 lbs (921 kg) |
| Hydraulic | |
| Pump Flow | 20 gpm (76 lpm) |
| Relief Valve Pressure | 3,336 psi |
| Hydraulic System | |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58 hp (43 kw) |
| Hydraulic Flow - High Flow - Loader Hydraulic Flow | 30 gpm (114 lpm) |
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 3,335 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39 hp (29 kw) |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 20 gpm (76 lpm) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335 psi |
| Loader | |
| Breakout Force | 5,035 lbs (2,284 kg) |
| Operating Load | 2,899 lbs (1,315 kg) |
| Tipping Load | 5,800 lbs (2,631 kg) |
| Noise Level | |
| Inside Cab** | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** | 103 dB(A) |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 5,035 lbs (2,284 kg) |
| Ground Contact Area - With 320 Mm/12.6 In Track | 1483 in2 |
| Ground Contact Area - With 400 Mm/15.7 In Track | 1848 in2 |
| Ground Pressure - With 320 Mm/12.6 In Track | 6 psi |
| Ground Pressure - With 400 Mm/15.7 In Track | 5 psi |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rated Operating Capacities - 35% Tipping Load | 2,030 lbs (921 kg) |
| Rated Operating Capacities - 50% Tipping Load | 2,900 lbs (1,315 kg) |
| Rated Operating Capacity With Optional Counterweight | 3,100 lbs (1,406 kg) |
| Tipping Load | 5,800 lbs (2,631 kg) |
| Operational | |
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Capacity | 3 gal (11 l) |
| Fuel Capacity | 28 gal (105 l) |
| Hydraulic System Fluid Capacity | 13 gal (50 l) |
| Max Speed - High Range | 9 mph (14 kph) |
| Max Speed - Low Range | 6 mph (10 kph) |
| Operating Voltage | 12 V |
| Operating Weight | 8,847 lbs (4,013 kg) |
| Power Train | |
| Travel Speed - Forward Or Reverse - One Speed | 6 mph (10 kph) |
| Travel Speed - Forward Or Reverse - Two Speed | 9 mph (14 kph) |
| Service Refill Capacities | |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 28 gal (105 l) |
| Hydraulic System | 13 gal (50 l) |
| Hydraulic Tank | 10 gal (39 l) |
| Undercarriage | |
| Ground Contact Area | 1488.01 in2 |
| Ground Pressure | 6 psi |
| Length Of Track On Ground | 11 ft (3 m) |
| Weights | |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Operating Weight | 8,945 lbs (4,057 kg) |
| Operating Weight - 320 Mm/12.6 In Tracks | 8,846 lbs (4,012 kg) |
| Operating Weight - 400 Mm/15.7 In Tracks | 8,945 lbs (4,057 kg) |