Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-11-30 Click here to place a bid
| Hours: | 3315 |
| Serial Number: | CAT0279CAMBT01836 |
| Machine Location: | LETHBRIDGE, AB |
Supplied by HeavyEquipmentData.com →
| Cab | |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
| Clearance At Max Lift And Dump | 8 ft (2 m) |
| Clearance At Maximum Lift And Dump | 96 in (243 cm) |
| Departure Angle | 44 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height - Top Of Cab | 7 ft (2 m) |
| Height To Top Of Cab | 7 ft (2 m) |
| Length - Track On Ground | 70 in (177 cm) |
| Length - With Bucket On Ground | 145 in (368 cm) |
| Length - Without Bucket | 117 in (296 cm) |
| Length With Bucket | 12 ft (4 m) |
| Length With Out Bucket | 10 ft (3 m) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 158 in (401 cm) |
| Maximum Reach - With Arms Parallel | 55 in (139 cm) |
| Overall Length - Track | 89 in (227 cm) |
| Rack Back Angle - Maximum Height | 85 degrees |
| Reach At Max Lift And Dump | 2 ft (1 m) |
| Reach At Maximum Lift/Dump | 23 in (59 cm) |
| Turn Radius From Center - Bucket | 91 in (231 cm) |
| Turn Radius From Center - Coupler | 58 in (147 cm) |
| Turn Radius From Center - Rear | 65 in (164 cm) |
| Turning Radius From Center - Inc Bucket | 91 in (231 cm) |
| Turning Radius From Center - Machine Rear | 65 in (164 cm) |
| Vehicle Width | 78 in (198 cm) |
| Width Over Tracks | 7 ft (2 m) |
| Engine | |
| Aspiration | Turbocharged |
| Bore | 3 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | 2,236 |
| Engine Model | Cat C3.4T |
| Gross Power | 84 hp (63 kw) |
| Gross Power - Sae J1995 | 84 hp (63 kw) |
| Net Power | 82 hp (61 kw) |
| Net Power - Sae 1349 | 82 hp (61 kw) |
| Number Of Cylinders | 4 |
| Power Measured @ | 2,500 rpm |
| Stroke | 5 in (12 cm) |
| General Specifications | |
| A Height to top of ROPS (Since 2010) | 83 in (2,117 mm) |
| B Length to coupler (Since 2010) | 117 in (2,960 mm) |
| Blade surface height at level lift arms (Since 2010) | 61 in (1,545 mm) |
| Blade surface height at maximum height (Since 2010) | 119 in (3,025 mm) |
| Blade surface height at maximum height (Since 2012) | 119 in (3,025 mm) |
| Blade surface height at maximum height (Since 2013) | 119 in (3,025 mm) |
| Blade surface height at minimum lift (Since 2010) | 5 in (122 mm) |
| Bore (Since 2010) | 4 in (94 mm) |
| Breakout force - lift (Since 2010) | 5,338 lbf (2,421 kg) |
| Breakout force - lift (Since 2013) | 5,338 lbf (24 kN) |
| Breakout force - tilt (Since 2010) | 6,212 lbf (2,817 kg) |
| Breakout force - tilt (Since 2013) | 6,212 lbf (28 kN) |
| Bucket overall width with edge (Since 2010) | 78 in (1,981 mm) |
| Bumper overhang from axle (Since 2010) | 28 in (719 mm) |
| C Length with bucket on ground (Since 2010) | 145 in (3,679 mm) |
| Carriage height above blade top (Since 2010) | 37 in (930 mm) |
| Carriage overall width without step (Since 2010) | 46 in (1,159 mm) |
| Carriage step additional width (Since 2010) | 4 in (106 mm) |
| Clearance at maximum lift/level bucket (Since 2010) | 116 in (2,937 mm) |
| D Maximum overall height (Since 2010) | 158 in (4,005 mm) |
| Dig depth with level bucket (Since 2010) | 1 in (16 mm) |
| Displacement (Since 2010) | 201 cu in (3 L) |
| Dump (Since 2010) | 3 |
| Dump clearance at maximum lift/dump (Since 2010) | 92 in (2,326 mm) |
| Engine Model (Since 2010) | C3.4 DIT |
| F Departure angle (Since 2010) | 44 deg |
| Floor angle at maximum lift/dump (Since 2010) | 40 deg |
| Floor angle at maximum lift/rack back (Since 2010) | 85 deg |
| Flywheel Power: Gross (Since 2013) | 84 hp (63 kW) |
| Flywheel Power: Net (Since 2010) | 82 hp (61 kW) |
| Front clearance circle radius (with bucket) (Since 2010) | 97 in (2,474 mm) |
| Fuel Tank Capacity (Since 2010) | 26 US gal (98 L) |
| G Wheelbase (Since 2010) | 70 in (1,767 mm) |
| Gross (Since 2010) | 84 hp (63 kW) |
| Ground clearance (Since 2010) | 9 in (231 mm) |
| Ground Pressure (Since 2012) | 4 psi |
| H Hinge pin height at carry position (Since 2010) | 8 in (195 mm) |
| Hinge pin height at maximum lift (Since 2010) | 123 in (3,128 mm) |
| Hydraulic Cycle Time, - Dump (Since 2012) | 3 sec |
| Hydraulic Cycle Time, - Lower (Empty, Float Down) (Since 2012) | 4 sec |
| Hydraulic Cycle Time, - Lower (Empty, Float Down) (Since 2013) | 4 sec |
| Hydraulic Cycle Time, - Raise (Since 2012) | 3 sec |
| Hydraulic Cycle Time, - Total (Since 2012) | 10 sec |
| Hydraulic Pressure - High Flow/XPS (Since 2013) | 4,061 psi (28,000 kPa) |
| Hydraulic Pressure - Standard (Since 2013) | 3,335 psi (23,000 kPa) |
| Hydraulic Pump Capacity (Since 2010) | 22 US gpm (84 L/min) |
| Hydraulic Pump Capacity - High Flow/XPS (Since 2013) | 33 US gpm (125 L/min) |
| Hydraulic Pump Capacity - Standard (Since 2013) | 22 US gpm (84 L/min) |
| Hydraulic System Capacity (Since 2012) | 15 |
| Hydraulic System Capacity - (includes tank) (Since 2010) | 15 US gal (57 L) |
| Hydraulic Tank Capacity (Since 2010) | 11 US gal (42 L) |
| J Clearance at maximum lift/dump (Since 2010) | 94 in (2,395 mm) |
| K Floor angle at maximum lift/dump (Since 2010) | 40 deg |
| L Floor angle at maximum lift/rack (Since 2010) | 85 deg |
| Lower (Empty, Float Down) (Since 2010) | 4 |
| M Clearance at maximum lift/level (Since 2010) | 116 in (2,937 mm) |
| Maximum floor angle - at carry position (Since 2010) | 26 deg |
| Maximum floor angle at minimum lift (Since 2010) | 26 deg |
| Maximum overall height (Since 2010) | 164 in (4,155 mm) |
| Maximum overall height (Since 2013) | 158 in (4,005 mm) |
| N Hinge pin height at maximum lift (Since 2010) | 123 in (3,128 mm) |
| Net Power (Since 2012) | 82 hp (61 kw) |
| No. Cylinders (Since 2010) | 4 |
| O Reach at level lift arm/bucket (Since 2010) | 55 in (1,387 mm) |
| One Speed Forward (Since 2010) | 0 - 5 mph |
| One Speed Reverse (Since 2010) | 0 - 5 mph |
| Operating Capacity - 50% Tipping Load (Since 2012) | 3,200 lb |
| Operating weight (Since 2010) | 9,810 lbs (4,449 kg) |
| Overall length at minimum lift, level tine (Since 2010) | 157 in (3,997 mm) |
| Overall length with bucket on ground (Since 2010) | 150 in (3,819 mm) |
| Raise (Since 2010) | 3 |
| Rated bucket capacity (Since 2010) | 1 cu yd (0 cu m) |
| Rated Engine RPM (Since 2010) | 2,500 rpm |
| Rated operating capacity (Since 2010) | 2,240 lbs (1,016 kg) |
| Rated operating capacity at 35% (Since 2013) | 2,240 lbs (1,016 kg) |
| Rated operating capacity at 50% (Since 2010) | 3,200 lbs (1,451 kg) |
| Reach at level lift arm/bucket (Since 2010) | 61 in (1,537 mm) |
| Reach at maximum lift/dump (Since 2010) | 28 in (705 mm) |
| Shank front face reach at level lift arms (Since 2010) | 33 in (849 mm) |
| Shank front face reach at level lift arms (Since 2012) | 33 in (849 mm) |
| Shank front face reach at level lift arms (Since 2013) | 33 in (849 mm) |
| Shank front face reach at maximum height (Since 2010) | 15 in (381 mm) |
| Shank front face reach at maximum height (Since 2012) | 15 in (381 mm) |
| Shank front face reach at maximum height (Since 2013) | 15 in (381 mm) |
| Shank front face reach at minimum lift (Since 2010) | 16 in (409 mm) |
| Stroke (Since 2010) | 5 in (120 mm) |
| Struck capacity (Since 2010) | 0 cu yd (0 cu m) |
| Tipping load (Since 2010) | 5,435 lbs (2,465 kg) |
| Total (Since 2010) | 10 |
| Tread Width (per side) (Since 2010) | 18 in (457 mm) |
| Two Speed Forward (Since 2010) | 0 - 9 mph |
| Two Speed Reverse (Since 2012) | 0 - 9 mph |
| Width (Since 2010) | 78 in (1,981 mm) |
| Width (Since 2012) | 78 in (1,981 mm) |
| Width (Since 2013) | 78 in (1,981 mm) |
| Width Over Tracks (Since 2010) | 78 in (1,981 mm) |
| Hydraulic | |
| Pump Flow | 22 gpm (84 lpm) |
| Relief Valve Pressure | 3,335 psi |
| Hydraulic System | |
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3,335 psi |
| Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Maximum Loader Hydraulic Pressure | 4,061 psi |
| Loader | |
| Breakout Force | 7,308 lbs (3,315 kg) |
| Bucket Capacity | 1 cu yd |
| Operating Load | 3,200 lbs (1,452 kg) |
| Tipping Angle | 6,483 degrees |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 7,308 lbs (3,315 kg) |
| Ground Contact Area | 2504 in2 |
| Ground Pressure | 4 psi |
| Rated Operating Capacities - 35% Tipping Load | 2,240 lbs (1,016 kg) |
| Rated Operating Capacities - 50% Tipping Load | 3,200 lbs (1,452 kg) |
| Rated Operating Capacity With Optional Counterweight | 3,465 lbs (1,572 kg) |
| Tipping Load | 6,483 lbs (2,941 kg) |
| Operational | |
| Alternator Supplied Amperage | 90 amps |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Capacity | 3 gal (10 l) |
| Fuel Capacity | 26 gal (98 l) |
| Hydraulic System Fluid Capacity | 15 gal (57 l) |
| Max Speed - High Range | 9 mph (14 kph) |
| Max Speed - Low Range | 5 mph (8 kph) |
| Operating Voltage | 12 V |
| Operating Weight | 9,892 lbs (4,487 kg) |
| Power Train | |
| Travel Speed Forward | 5 mph (8 kph) |
| Travel Speed Forward - 2-Speed | 9 mph (14 kph) |
| Travel Speed Reverse | 5 mph (8 kph) |
| Travel Speed Reverse - 2-Speed | 9 mph (14 kph) |
| Service Refill Capacities | |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 26 gal (98 l) |
| Hydraulic System | 15 gal (57 l) |
| Hydraulic Tank | 11 gal (42 l) |
| Undercarriage | |
| Ground Contact Area | 2504 in2 |
| Ground Pressure | 4 psi |
| Length Of Track On Ground | 6 ft (2 m) |
| Weights | |
| Operating Weight | 9,892 lbs (4,487 kg) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon