Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $42,000.00 USD
Apply for Financing
| Hours: | 3404 |
| Serial Number: | FD205956 |
| Machine Location: | FARGO, ND |
| More Information: | https://catused.com/cu/10297611 |
Supplied by HeavyEquipmentData.com →
| Air Conditioning System | |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab | |
| Fops | ISO 3449:2005 Level I |
| Fops Level Ii | ISO 3449:2005 Level II |
| Rops | ISO 3471:2008 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 7 in (18 cm) |
| Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach - Maximum Lift | 19 in (49 cm) |
| Clearance At Maximum Lift And Dump | 95 in (240 cm) |
| Departure Angle | 33 degrees |
| Ground Clearance | 1 ft (0 m) |
| Height | 7 ft (2 m) |
| Height - Top Of Cab | 7 ft (2 m) |
| Length | 13 ft (4 m) |
| Length - Track On Ground | 70 in (177 cm) |
| Length - With Bucket On Ground | 155 in (393 cm) |
| Length - Without Bucket | 126 in (319 cm) |
| Maximum Dump Angle | 54 degrees |
| Maximum Overall Height | 159 in (403 cm) |
| Maximum Reach - With Arms Parallel To Ground | 52 in (132 cm) |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Overall Length - Track | 89 in (227 cm) |
| Rack Back Angle - Maximum Height | 81 degrees |
| Reach - Maximum Lift/Dump | 34 in (85 cm) |
| Roll Back Angle | 25 degrees |
| Turning Radius From Center - Bucket (Racked) | 91 in (231 cm) |
| Turning Radius From Center - Coupler | 58 in (148 cm) |
| Turning Radius From Center - Machine Rear | 74 in (188 cm) |
| Vehicle Width (400 Mm/15.7 In Tracks) | 76 in (193 cm) |
| Vehicle Width (450 Mm/17.7 In Tracks) | 78 in (198 cm) |
| Weight | 11,608 lbs (5,265 kg) |
| Width | 6 ft (2 m) |
| Engine | |
| Bore | 4 in (10 cm) |
| Displacement | 232 cu in (3,802 cu cm) |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power - Sae J1995 | 98 hp (73 kw) |
| Net Power | 95 hp (71 kw) |
| Net Power - Iso 9249 | 95 hp (71 kw) |
| Net Power - Sae 1349 | 95 hp (71 kw) |
| Peak Torque - 1,500 Rpm - Sae J1995 | 246 lbs ft (334 nm) |
| Stroke | 5 in (12 cm) |
| General Specifications | |
| A Length of track on ground (Since 2016) | 70 in (1,767 mm) |
| B Overall length of track (Since 2016) | 89 in (2,270 mm) |
| Blade surface height at level lift arms (Since 2016) | 55 in (1,398 mm) |
| Blade surface height at maximum height (Since 2016) | 121 in (3,080 mm) |
| Blade surface height at minimum lift (Since 2016) | 1 in (31 mm) |
| Bore (Since 2016) | 4 in (100 mm) |
| Breakout force - lift (Since 2016) | 5,571 lbf (25 kN) |
| Breakout force - lift (Since 2017) | 5,571 lbf (2,527 kgf) |
| Breakout force - lift (Since 2018) | 5,571 lbf (25 kN) |
| Breakout force - tilt (Since 2016) | 6,232 lbf (28 kN) |
| Breakout force - tilt (Since 2017) | 6,232 lbf (2,827 kgf) |
| Breakout force - tilt (Since 2018) | 6,232 lbf (28 kN) |
| Breakout force, tilt cylinder (Since 2016) | 7,270 lbf (32 kN) |
| Breakout force, tilt cylinder (Since 2017) | 7,270 lbf (3,298 kgf) |
| Breakout force, tilt cylinder (Since 2018) | 7,270 lbf (32 kN) |
| C Length without bucket (Since 2016) | 126 in (3,189 mm) |
| Carriage height above blade top (Since 2016) | 37 in (926 mm) |
| Carriage overall width without step (Since 2016) | 46 in (1,160 mm) |
| Carriage step additional width (Since 2016) | 4 in (106 mm) |
| category (Since 2020) | COMPACT TRACK LOADERS |
| Clearance at maximum lift/level bucket (Since 2016) | 116 in (2,955 mm) |
| D Length with bucket on ground (Since 2016) | 155 in (3,931 mm) |
| Dig depth with level bucket (Since 2016) | -3 in (-86 mm) |
| Displacement (Since 2016) | 232 cu in (4 L) |
| Dump (Since 2016) | 2 |
| Dump clearance at maximum lift/dump (Since 2016) | 91 in (2,301 mm) |
| Engine Model (Since 2016) | C3.8 DIT |
| ENGINE POWER (Since 2016) | 95 hp (71 kw) |
| F Maximum overall height (Since 2016) | 159 in (4,032 mm) |
| Floor angle at maximum lift/dump (Since 2016) | -54 deg |
| Floor angle at maximum lift/rack back (Since 2016) | 81 deg |
| Flywheel Power - Gross (SAE J1995) (Since 2016) | 98 hp (73 kW) |
| Flywheel Power - Net (SAE 1349) (Since 2016) | 95 hp (71 kW) |
| Flywheel Power - Net (SAE 1349)* (Since 2018) | 95 hp (71 kW) |
| Front clearance circle radius (with bucket) (Since 2016) | 96 in (2,429 mm) |
| Fuel Tank Capacity (Since 2016) | 32 US gal (122 L) |
| G Bucket pin height at maximum lift (Since 2016) | 126 in (3,208 mm) |
| Ground Clearance (Since 2016) | 10 in (245 mm) |
| Ground pressure (Since 2016) | 6 psi (38 kPa) |
| H Bucket pin height at carry position (Since 2016) | 7 in (180 mm) |
| Height to top of cab (Since 2016) | 84 in (2,125 mm) |
| Hinge pin height at maximum lift (Since 2016) | 126 in (3,197 mm) |
| Hydraulic Pressure, High Flow/XPS (Since 2016) | 4,061 psi (28,000 kPa) |
| Hydraulic Pressure, Standard (Since 2016) | 3,336 psi (23,000 kPa) |
| Hydraulic Pump Capacity, - High Flow/XPS (Since 2016) | 32 US gpm (121 L/min) |
| Hydraulic Pump Capacity, Standard (Since 2016) | 23 US gpm (86 L/min) |
| Hydraulic System Capacity - (includes tank) (Since 2016) | 15 US gal (55 L) |
| Hydraulic Tank Capacity (Since 2016) | 10 US gal (39 L) |
| J Reach at maximum lift and dump (Since 2016) | 34 in (852 mm) |
| K Clearance at maximum lift and dump (Since 2016) | 95 in (2,399 mm) |
| L Ground clearance (Since 2016) | 10 in (245 mm) |
| Lower (Empty, Float Down) (Since 2016) | 5 |
| M Departure angle (Since 2016) | 33 deg |
| Maximum floor angle at minimum lift (Since 2016) | 25 deg |
| Maximum overall height (Since 2016) | 162 in (4,102 mm) |
| MODEL (Since 2016) | 299D2 |
| N Maximum dump angle (Since 2016) | 54 deg |
| No. Cylinders (Since 2016) | 4 |
| O Vehicle width (Since 2016) | 76 in (1,931 mm) |
| One Speed Forward (Since 2016) | 5 mph (8 km/h) |
| One Speed Reverse (Since 2016) | 5 mph (8 km/h) |
| OPERATING LOAD (Since 2016) | 4,600 lbs (2,087 kg) |
| Operating weight (Since 2016) | 12,055 lbs (5,468 kg) |
| OPERATING WIDTH (Since 2016) | 76 / 78 |
| Overall length at minimum lift, level tine (Since 2016) | 169 in (4,294 mm) |
| Overall length with bucket on ground (Since 2016) | 158 in (4,004 mm) |
| P Turning radius from center - machine rear (Since 2016) | 74 in (1,881 mm) |
| Q Turning radius from center - coupler (Since 2016) | 58 in (1,476 mm) |
| R Turning radius from center - bucket (Since 2016) | 91 in (2,314 mm) |
| Raise (Since 2016) | 5 |
| Rated bucket capacity (Since 2016) | 1 cu yd (0 cu m) |
| Rated Engine RPM (Since 2016) | 2,400 rpm |
| RATED OPERATING CAPACITY (35%) (Since 2020) | 3,200 lbs (1,452 kg) |
| RATED OPERATING CAPACITY (50%) (Since 2019) | 3,200 lbs (1,452 kg) |
| Rated operating capacity at 35% (Since 2016) | 3,481 lbs (1,579 kg) |
| Rated operating capacity at 50% (Since 2016) | 4,973 lbs (2,256 kg) |
| Rated operating capacity at 50% (Since 2017) | 4,972 lbs (2,255 kg) |
| Reach at level lift arm/bucket (Since 2016) | 56 in (1,416 mm) |
| Reach at maximum lift/dump (Since 2016) | 36 in (904 mm) |
| S Maximum reach with arms parallel to ground (Since 2016) | 52 in (1,319 mm) |
| Shank front face reach at level lift arms (Since 2016) | 31 in (778 mm) |
| Shank front face reach at maximum height (Since 2016) | 32 in (811 mm) |
| Shank front face reach at minimum lift (Since 2016) | 16 in (403 mm) |
| Stroke (Since 2016) | 5 in (120 mm) |
| Struck capacity (Since 2016) | 0 cu yd (0 cu m) |
| T Rack back angle at maximum height (Since 2016) | 81 deg |
| Tipping load (Since 2016) | 9,946 lbs (4,511 kg) |
| Tipping load (Since 2017) | 9,945 lbs (4,511 kg) |
| Total (Since 2016) | 12 |
| Two Speed Forward (Since 2016) | 8 mph (13 km/h) |
| Two Speed Forward (Since 2017) | 8 mph (14 km/h) |
| U Bucket pin reach at maximum lift (Since 2016) | 19 in (493 mm) |
| Width (Since 2016) | 87 in (2,207 mm) |
| Hydraulic System | |
| Hydraulic Flow - High Flow Xps - Hydraulic Power (Calculated) | 76 hp (57 kw) |
| Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Flow | 32 gpm (121 lpm) |
| Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Pressure | 4,061 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 hp (33 kw) |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gpm (87 lpm) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335 psi |
| Noise Level | |
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 104 dB(A) |
| Operating Specifications | |
| Breakout Force - Lift Cylinder | 6,162 lbs (2,795 kg) |
| Breakout Force - Tilt Cylinder | 7,270 lbs (3,298 kg) |
| Ground Contact Area - With 400 Mm/15.7 In Track | 2184 in2 |
| Ground Contact Area - With 450 Mm/17.7 In Track | 2463 in2 |
| Ground Pressure - With 400 Mm/15.7 In Track | 5 psi |
| Ground Pressure - With 450 Mm/17.7 In Track | 5 psi |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Rated Operating Capacities - 35% Tipping Load | 3,200 lbs (1,452 kg) |
| Rated Operating Capacities - 50% Tipping Load | 4,600 lbs (2,087 kg) |
| Rated Operating Capacity With Optional Counterweight | 4,860 lbs (2,204 kg) |
| Tipping Load | 9,200 lbs (4,173 kg) |
| Operational | |
| Operating Weight | 11,275 lbs (5,114 kg) |
| Power Train | |
| Travel Speed - Forward Or Reverse - One Speed | 5 mph (8 kph) |
| Travel Speed - Forward Or Reverse - Two Speed | 8 mph (14 kph) |
| Service Refill Capacities | |
| Cooling System | 4 gal (16 l) |
| Diesel Exhaust Fluid (Def) Tank | 5 gal (19 l) |
| Engine Crankcase | 4 gal (13 l) |
| Fuel Tank | 32 gal (122 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 10 gal (39 l) |
| Weights | |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon