Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $1,349,000.00 USD
Apply for Financing
| Hours: | 28609 |
| Serial Number: | RJG00626 |
| Machine Location: | TOPEKA, KS |
| More Information: | https://catused.com/cu/10285835 |
Supplied by HeavyEquipmentData.com →
| Blades | |
| Blade Type | U |
| U-Blade Capacity With Trash Rack | 64 cu yd |
| U-Blade Width | 17 ft (5 m) |
| Dimensions | |
| Ground Clearance | 2 ft (1 m) |
| Height | 13 ft (4 m) |
| Height - Rops Cab | 13 ft (4 m) |
| Height - Rops/Canopy | 14 ft (4 m) |
| Height - Stripped Top | 11 ft (3 m) |
| Height To Top Of Cab | 13 ft (4 m) |
| Length | 30 ft (9 m) |
| Length Of Track On Ground | 13 ft (4 m) |
| Length W/ Blade | 30 ft (9 m) |
| Length W/O Blade | 18 ft (5 m) |
| Overall Length - Basic Tractor | 18 ft (5 m) |
| Overall Length - With Blade | 295 in (750 cm) |
| Weight | 146,500 lbs (66,451 kg) |
| Width | 10 ft (3 m) |
| Width - Over Trunnions | 12 ft (4 m) |
| Width - Without Trunnions - Standard Shoe | 10 ft (3 m) |
| Width Over Tracks | 10 ft (3 m) |
| Engine | |
| Aspiration | Turbocharged |
| Bore | 5 in (14 cm) |
| Displacement | 1,648 cu in (26,998 cu cm) |
| Engine Make | 2,236 |
| Engine Model | C27 ACERT |
| Flywheel Power | 580 hp (433 kw) |
| Gross Power | 646 hp (482 kw) |
| Net Power | 580 hp (433 kw) |
| Number Of Cylinders | 12 |
| Power Measured @ | 1,800 rpm |
| Rpm | 1,800 rpm |
| Stroke | 6 in (15 cm) |
| General Specifications | |
| (1000 psi) (Since 2012) | @ 1800 RPM |
| Approx. Machine Weight (Since 2005) | 154,700 lbs (70,171 kg) |
| B Without Pushblock (Since 2013) | 69 in (2 m) |
| Blade 10SU - Arrangement shipping weight - Abrasion Dozer (Since 2012) | 24,403 lbs (11,069 kg) |
| Blade 10SU - Arrangement shipping weight - Standard Dozer (Since 2010) | 22,550 lbs (10,229 kg) |
| Blade 10U - Arrangement shipping weight - Abrasion Dozer (Since 2012) | 27,366 lbs (12,413 kg) |
| Blade 10U - Arrangement shipping weight - Standard Dozer (Since 2010) | 23,775 lbs (10,784 kg) |
| Blade arrangement - Abrasion Dozer (Since 2010) | 27,366 lb (12,413 kg) |
| Blade arrangement - B Width (including std. - end bits) (Since 2010) | 207 in (5 m) |
| Blade arrangement - B Width - (including std. end bits) (Since 2012) | 207 in (5 m) |
| Blade arrangement - Blade Capacities Weight, Shipping (Since 2010) | 29 cu yd (22 cu m) |
| Blade arrangement - C Height (Since 2010) | 83 in (2 m) |
| Blade arrangement - D Max. Digging Depth (Since 2010) | 27 in (674 mm) |
| Blade arrangement - E Ground Clearance @ - Full Lift (Since 2010) | 59 in (1,497 mm) |
| Blade arrangement - G Dual Pitch Adjustment (Since 2012) | 5 - 6 deg |
| Blade arrangement - G Max. Pitch Adjustment (Since 2012) | 2 - 2 deg |
| Blade arrangement - H Dual Max. Hyd. Tilt (Since 2010) | 61 in (1,560 mm) |
| Blade arrangement - H Max. Hydraulic Tilt (Since 2010) | 42 in (1,074 mm) |
| Blade arrangement - J Hydraulic Tilt (Manual - Brace Centered) (Since 2012) | 31 in (782 mm) |
| Blade arrangement - J Hydraulic Tilt - (Manual Brace (Since 2010) | 31 in (782 mm) |
| Blade arrangement - K Push Arm Trunnion Width - (to Ball Centers) (Since 2010) | 142 in (4 m) |
| Blade arrangement - K Push Arm Trunnion Width - Maximum Track Width - Permitted (Since 2010) | 30 in (762 mm) |
| Blade arrangement - Tractor and Dozer A Length (Since 2010) | 305 in (8 m) |
| Blade arrangement - Type (Since 2010) | Universal |
| Blade arrangement - Width (Since 2010) | 207 in (5 m) |
| Blade arrangement shipping weight - Standard Dozer (Since 2012) | 23,775 lbs (10,784 kg) |
| Blade Capacities (Since 2012) | 44 cu yd (34 cu m) |
| Blade Dimensions - Ground Clearance at full raise (Since 2012) | 56 in (1,422 mm) |
| Blade Dimensions - Height (Since 2012) | 112 in (2,845 mm) |
| Blade Dimensions - Maximum Dig Depth (Since 2012) | 24 in (606 mm) |
| Blade Dimensions - Maximum Hydraulic Tilt (Since 2012) | 40 in (1,014 mm) |
| Blade Dimensions - Width including std. end bits (Since 2012) | 183 in (5 m) |
| Blade Types and Widths - Semi-U (Since 2006) | 191 in (5 m) |
| Blade Types and Widths - Universal (Since 2006) | 207 in (5 m) |
| Bore (Since 2006) | 5 in (137 mm) |
| Clearance under beam, shank vertical R Ripper Up (Since 2013) | 80 in (2 m) |
| D Without Pushblock (Since 2013) | 85 in (2 m) |
| Displacement (Since 2006) | 1,648 cu in (27 L) |
| Displacement (Since 2012) | 1,649 cu in (27 L) |
| Dozer Weight (Since 2012) | 17,751 lbs (8,059 kg) |
| Engine Model (Since 2006) | C27 ACERT |
| F Ripper Down (Since 2013) | 45 in (1,130 mm) |
| Flow at 6890 kPa (Since 2012) | 119 US gpm (450 L/min) |
| Flow at 6890 kPa (Since 2013) | 137 US gpm (519 L/min) |
| Flow at 6890 kPa - (1000 psi) (Since 2006) | 119 US gpm (450 L/min) |
| Flywheel Power (Since 2006) | 580 hp (433 kW) |
| Forward Speed - 1st (Since 2005) | 3 mph (4 km/h) |
| Forward Speed - 2nd (Since 2005) | 5 mph (7 km/h) |
| Forward Speed - 3rd (Since 2005) | 8 mph (13 km/h) |
| Fuel Tank Refill Capacity (Since 2006) | 318 US gal (1,204 L) |
| Fuel Tank Refill Capacity (Since 2012) | 293 US gal (1,109 L) |
| GENERAL DIMENSIONS - (without Blade) (Since 2012) | 210 in (5 m) |
| GENERAL DIMENSIONS - Ground Clearance (Since 2006) | 24 in (615 mm) |
| GENERAL DIMENSIONS - Ground Clearance (Since 2010) | 22 in (571 mm) |
| GENERAL DIMENSIONS - Ground Clearance (Since 2012) | 24 in (615 mm) |
| GENERAL DIMENSIONS - Height (Stripped Top) (Since 2006) | 127 in (3 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab) (Since 2006) | 160 in (4 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab) (Since 2010) | 158 in (4 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab) (Since 2012) | 160 in (4 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Canopy) (Since 2006) | 171 in (4 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Canopy) (Since 2010) | 168 in (4 m) |
| GENERAL DIMENSIONS - Height (To Top of ROPS Canopy) (Since 2012) | 171 in (4 m) |
| GENERAL DIMENSIONS - Overall Length (with SU Blade) (Since 2012) | 296 in (8 m) |
| GENERAL DIMENSIONS - Overall Length - (with Blade and Ripper) (Since 2012) | 365 in (9 m) |
| GENERAL DIMENSIONS - Overall Length - (With SU Blade & Ripper) (Since 2006) | 365 in (9 m) |
| GENERAL DIMENSIONS - Overall Length - (With SU Blade and SS Ripper) (Since 2010) | 361 in (9 m) |
| GENERAL DIMENSIONS - Overall Length - (with SU Blade and SS Ripper) (Since 2012) | 361 in (9 m) |
| GENERAL DIMENSIONS - Overall Length - (Without Blade & Ripper) (Since 2006) | 210 in (5 m) |
| GENERAL DIMENSIONS - Overall Length - (Without Blade and Ripper) (Since 2010) | 210 in (5 m) |
| GENERAL DIMENSIONS - Overall Length - (without Blade and Ripper) (Since 2012) | 210 in (5 m) |
| GENERAL DIMENSIONS - Width (Over Trunnion) (Since 2006) | 146 in (4 m) |
| GENERAL DIMENSIONS - Width (Over Trunnion) (Since 2010) | 147 in (4 m) |
| GENERAL DIMENSIONS - Width (over Trunnion) (Since 2012) | 146 in (4 m) |
| GENERAL DIMENSIONS - Width (W/O Trunnion - - Std. Shoe) (Since 2006) | 124 in (3 m) |
| GENERAL DIMENSIONS - Width (w/o Trunnion - Std. Shoe) (Since 2010) | 130 in (3 m) |
| GENERAL DIMENSIONS - Width (without Trunnion - - Std. Shoe) (Since 2012) | 124 in (3 m) |
| Ground Contact Area (Since 2006) | 9,635 sq in (6 sq m) |
| Ground Contact Area (Since 2013) | 9,153 sq in (6 sq m) |
| Ground Contact Area (W/Std. Shoe) (Since 2006) | 7,347 sq in (5 sq m) |
| Ground Contact Area (w/Std. Shoe) (Since 2012) | 7,347 sq in (5 sq m) |
| Ground Contact Area - (with Std. Shoe) (Since 2012) | 7,347 sq in (5 sq m) |
| Ground Pressure (Since 2006) | 15 psi (103 kPa) |
| Ground Pressure (Since 2013) | 17 psi (116 kPa) |
| Horse- power FW/ Drawbar (Since 2005) | 580 hp (433 kw) |
| Installed Weights - Each additional tooth group (Since 2013) | 1,155 lbs (524 kg) |
| Installed Weights - Ripper with standard shank (Since 2013) | 15,763 lbs (7,150 kg) |
| J Forward (Since 2013) | 18 deg |
| K Backward (Since 2013) | 23 deg |
| Length of Track on Ground (Since 2012) | 153 in (4 m) |
| Length of Track on Ground (Idler to Idler) (Since 2012) | 153 in (4 m) |
| Length of Track on Ground - (Idler to Idler) (Since 2006) | 153 in (4 m) |
| Lift (Since 2013) | 2,725 psi (18,790 kPa) |
| Mounting Point (Since 2006) | Under Operators Platform |
| Mounting Point (Since 2013) | Under Operator's Platform |
| Mounting Point [Hydraulic Controls] (Since 2010) | Under Operators Platform |
| N Maximum ramp angle, ripper up - (shank pinned in bottom hole) (Since 2013) | 51 deg |
| No. of Cylinders (Since 2006) | 12 |
| Number of Pockets (Since 2013) | 3 |
| Number of Valves (Since 2006) | 2 Std. 4 with Ripper At Rear Under Fuel Tank 1 + Dual Tilt (Attach.) Radiator Guard |
| Number of Valves [Hydraulic Controls] (Since 2010) | 2 Std. 4 with Ripper At Rear Under Fuel Tank 1 + Dual Tilt (Attach.) Radiator Guard |
| O Overall width (Since 2013) | 115 in (3 m) |
| Operating Weight (Since 2012) | 144,985 lb |
| Operating Weight: (Since 2012) | 144,986 lbs (65,764 kg) |
| Operating Weight: - Power Shift Clutch Brake (Since 2006) | 146,500 lbs (66,451 kg) |
| Operating Weight: - Power Shift Clutch Brake (Since 2013) | 154,700 lbs (71,000 kg) |
| Overall Height (Since 2005) | 127 in (3 m) |
| Overall Length (Since 2005) | 292 in (7 m) |
| Overall Width (Since 2005) | 147 in (4 m) |
| P Height (Since 2013) | 53 in (1,350 mm) |
| Power (Since 2012) | 580 hp (433 kw) |
| Product Identification Prefix (Since 2005) | RJG |
| Pump Flow at 6890 kPa (1000 psi), 1800 rpm [Hydraulic Controls] (Since 2010) | 119 US gpm (450 L/min) |
| Q Length (Since 2013) | 39 in (990 mm) |
| Rated Engine RPM (Since 2006) | 1,800 rpm |
| Remarks (Since 2005) | C27 ACERT DITA MEUI |
| Reverse Speed - Gear 1 (Since 2006) | 3 mph (5 km/h) |
| Reverse Speed - Gear 2 (Since 2006) | 6 mph (9 km/h) |
| Reverse Speed - Gear 3 (Since 2006) | 10 mph (16 km/h) |
| Ripper length behind track, shank vertical, ripper down (A) C With Pushblock 2.48 m (Since 2013) | 8'2" N/A |
| Ripper to Track Ripper length behind track, shank vertical, ripper up (A) A With Pushblock 2.08 m (Since 2013) | 6'10" N/A |
| S Ripper Down (Since 2013) | 15 in (380 mm) |
| Speed - Gear 1 (Since 2006) | 3 mph (4 km/h) |
| Speed - Gear 2 (Since 2006) | 5 mph (7 km/h) |
| Speed - Gear 3 (Since 2006) | 8 mph (13 km/h) |
| Stroke (Since 2006) | 6 in (152 mm) |
| T Pocket Spacing (Since 2013) | 52 in (1,320 mm) |
| Tank Capacity (Oil) (Since 2006) | 37 US gal (139 L) |
| Tank Capacity (Oil) (Since 2012) | 35 US gal (131 L) |
| Tank Capacity (Oil) (Since 2013) | 38 US gal (144 L) |
| Tank Capacity (Oil) [Hydraulic Controls] (Since 2010) | 35 US gal (131 L) |
| Tilt (Since 2013) | 2,950 psi (20,340 kPa) |
| Tip to track distance, shank vertical (A) E Ripper Up (Since 2013) | 29 in (730 mm) |
| Track Gauge (Since 2005) | 100 in (3 m) |
| Track Rollers (Each Side) (Since 2006) | 8 |
| Track Shoe Width (Since 2006) | 32 in (800 mm) |
| Track Shoe Width (Since 2013) | 30 in (760 mm) |
| Tractor and Dozer Dimensions - Length Blade Straight (Since 2012) | 283 in (7 m) |
| Trans- mission (Since 2005) | TD 3-Spd PS |
| Type (Since 2012) | 9U |
| U Shank Gauge (Since 2013) | 104 in (3 m) |
| V Track Clearance with standard shoe (Since 2013) | 4 in (97 mm) |
| W Width across widest part of lift cylinders (Since 2013) | 69 in (2 m) |
| Weight Installed (Since 2006) | Included in Std. Tractor (Two Valves) |
| Weight Installed (Since 2012) | Included in Std. Tractor (Two Valves |
| Weight Installed (cid:3) Ripper valve. (Since 2010) | Included in Std. Tractor (Two Valves |
| Width of Standard Track Shoe (Since 2006) | 24 in (610 mm) |
| Hydraulic System | |
| Pump Flow Capacity | 107 gpm (405 lpm) |
| Pump Type | gear driven |
| Relief Valve Pressure | 2,725 psi |
| Operational | |
| Alternator Supplied Amperage | 95 amps |
| Cooling System Fluid Capacity | 35 gal (132 l) |
| Engine Oil Capacity | 18 gal (68 l) |
| Final Drives Fluid Capacity | 6 gal (23 l) |
| Fuel Capacity | 318 gal (1,204 l) |
| Hydraulic Fluid Capacity | 38 gal (144 l) |
| Operating Voltage | 24 V |
| Operating Weight | 146,500 lbs (66,451 kg) |
| Powertrain Fluid Capacity | 51 gal (193 l) |
| Rippers | |
| Each Additional Shank | 1,160 lbs (526 kg) |
| Service Refill Capacities | |
| Fuel Tank | 318 gal (1,204 l) |
| Standard Blade | |
| Capacity | 24 cu yd |
| Cutting Depth | 27 in (67 cm) |
| Height | 81 in (206 cm) |
| Width | 16 ft (5 m) |
| Standards | |
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Transmission | |
| 1.0 Forward | 3 mph (4 kph) |
| 1.0 Reverse | 3 mph (5 kph) |
| 2.0 Forward | 5 mph (7 kph) |
| 2.0 Reverse | 6 mph (9 kph) |
| 3.0 Forward | 8 mph (13 kph) |
| 3.0 Reverse | 10 mph (16 kph) |
| Max Speed - Forward | 8 mph (13 kph) |
| Max Speed - Reverse | 10 mph (16 kph) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Transmission Type | Powershift |
| Undercarriage | |
| Ground Contact Area | 7326 in2 |
| Length - Track On Ground | 13 ft (4 m) |
| Number Of Shoes Per Side | 44 |
| Number Of Track Rollers Per Side | 8 |
| Standard Shoe Size | 24 in (61 cm) |
| Track Gauge | 8 ft (3 m) |
| Track Pitch | 10 in (26 cm) |
| Track Rollers/Side | 8 |
| Track Width | 24 ft (7 m) |
| Weights | |
| Operating Weight | 144,986 lbs (65,765 kg) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon