Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $93,684.00 USD
Apply for Financing
| Hours: | 1131 |
| Serial Number: | KF207324 |
| Machine Location: | PITTSTON , PA |
| More Information: | https://catused.com/cu/10295894 |
Supplied by HeavyEquipmentData.com →
| Blade | |
| Blade Capacity - Intermediate | 2 cu yd |
| Blade Capacity - Lgp | 2 cu yd |
| Blade Capacity - Xl | 2 cu yd |
| Blade Height - Intermediate | 34 in (86 cm) |
| Blade Height - Lgp | 34 in (86 cm) |
| Blade Height - Xl | 36 in (91 cm) |
| Blade Width - Intermediate | 115 in (292 cm) |
| Blade Width - Lgp | 124 in (315 cm) |
| Blade Width - Xl | 104 in (265 cm) |
| Digging Depth - Intermediate | 23 in (57 cm) |
| Digging Depth - Lgp | 23 in (57 cm) |
| Digging Depth - Xl | 23 in (57 cm) |
| Dimensions | |
| Height | 9 ft (3 m) |
| Length | 14 ft (4 m) |
| Weight | 17,842 lbs (8,093 kg) |
| Width | 8 ft (2 m) |
| Engine | |
| Bore | 4 in (11 cm) |
| Caterpillar | 74 hp (55 kw) |
| Displacement | 269 cu in (4,408 cu cm) |
| Eec 80/1269 | 74 hp (55 kw) |
| Engine Model | CAT C4.4 ACERT |
| Iso 9249 | 74 hp (55 kw) |
| Power - Gross | 81 hp (60 kw) |
| Power - Net | 74 hp (55 kw) |
| Sae J1349 | 74 hp (55 kw) |
| Stroke | 5 in (13 cm) |
| General Specifications | |
| A Length (Blade Straight) (Since 2013) | 168 in (4,266 mm) |
| B Width (including std. end bits) (Since 2013) | 104 in (2,646 mm) |
| Blade Angle (Since 2013) | 25 deg |
| Blade Capacities (Since 2013) | 2 cu yd (2 cu m) |
| C Height (Since 2013) | 36 in (910 mm) |
| D Max. Digging Depth (Since 2013) | 23 in (573 mm) |
| Flow at 6890 kPa (Since 2010) | 19 US gpm (74 L/min) |
| Forward Speed (Since 2010) | 6 mph (9 km/h) |
| G Max. Pitch Adjustment (Since 2013) | 52 - 58 deg |
| Ground Clearance @ Full Lift (Since 2013) | 29 in (730 mm) |
| J Hydraulic Tilt (Since 2013) | 14 in (368 mm) |
| L Maximum reach at ground line (Since 2010) | 30 in (766 mm) |
| Length (Blade Angled) (Since 2013) | 188 in (4,763 mm) |
| Lift Relief Valve Setting (Since 2010) | 2,988 psi (20,600 kPa) |
| M Maximum ground clearance - under tip (shank pinned in bottom hole) (Since 2010) | 18 in (448 mm) |
| Mounting Point (Since 2010) | Fender |
| N Maximum ramp angle, ripper up - (shank pinned in bottom hole) (Since 2010) | 27 deg |
| Number of Pockets (Since 2010) | 3 |
| Number of Valves (Since 2010) | 3 or 4 |
| P Height (Since 2010) | 7 in (165 mm) |
| Q Length (Since 2010) | 8 in (190 mm) |
| Reverse Speed (Since 2010) | 6 mph (10 km/h) |
| Ripper Beam O Overall width (Since 2010) | 67 in (1,710 mm) |
| Ripper Forces: - Penetration Force (Since 2010) | 4,970 lbf (2,250 kg) |
| Ripper Forces: - Pryout Force (Since 2010) | 9,900 lbf (44 kN) |
| Ripper Shank G Maximum digging depth (Since 2010) | 13 in (338 mm) |
| Ripper Type (Since 2010) | Fixed Parallelogram |
| T Pocket Spacing (Since 2010) | 31 in (775 mm) |
| Tank Capacity (Oil) (Since 2010) | 16 US gal (60 L) |
| Type (Since 2013) | Variable Power Angling and Tilt |
| U Shank Gauge (Since 2010) | 61 in (2 m) |
| V Track clearance with - Installed weights - Ripper with standard shank (Since 2010) | 1,222 lbs (554 kg) |
| V Track clearance with - standard shoe (Since 2010) | 3 in (80 mm) |
| Weight Installed (Since 2010) | 86 lbs (39 kg) |
| Weight Shipping (Dozer) (Since 2013) | 1,261 lbs (572 kg) |
| Width (Blade Angled) (Since 2013) | 95 in (2,417 mm) |
| Hydraulic Controls | |
| Pump Output | 19 gpm (73 lpm) |
| Relief Valve Setting | 2,988 psi |
| Ripper | |
| Height | 7 in (17 cm) |
| Maximum Digging Depth | 13 in (34 cm) |
| Maximum Ground Clearance Under Tip | 18 in (45 cm) |
| Maximum Reach - Ground Line | 30 in (77 cm) |
| Number Of Shanks | 3 |
| Overall Width | 67 in (171 cm) |
| Ripper Type | Parallelogram |
| Weight | 1,222 lbs (554 kg) |
| Service Refill Capacities | |
| Cooling System | 6 gal (23 l) |
| Crankcase - With Filter | 3 gal (11 l) |
| Final Drive - Each - Lgp | 3 gal (10 l) |
| Final Drive - Each - Xl | 3 gal (10 l) |
| Fuel Tank | 52 gal (195 l) |
| Transmission - Hydraulic Tank | 16 gal (59 l) |
| Standards | |
| Fops | SAE J231-JAN81, ISO 3449-92 |
| Rops | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| Transmission | |
| Drive Pumps | 2 |
| Maximum Travel Speed - Forward | 6 mph (9 kph) |
| Maximum Travel Speed - Reverse | 6 mph (10 kph) |
| Relief Valve Settings | 6,911 psi |
| Track Motors | 2 |
| Undercarriage | |
| Ground Contact Area - Lgp | 4124 in2 |
| Ground Contact Area - Xl | 2637 in2 |
| Ground Pressure - Lgp | 4 psi |
| Ground Pressure - Xl | 7 psi |
| Length - Track On Ground - Lgp | 83 in (211 cm) |
| Length - Track On Ground - Xl | 83 in (211 cm) |
| Shoe Width - Lgp | 25 in (64 cm) |
| Shoe Width - Xl | 16 in (41 cm) |
| Track Gauge - Lgp | 68 in (173 cm) |
| Track Gauge - Xl | 59 in (150 cm) |
| Weights | |
| Operating Weight - Lgp | 17,842 lbs (8,093 kg) |
| Operating Weight - Xl | 17,185 lbs (7,795 kg) |
| Winch | |
| Control | Hydraulic |
| Drum Capacity - Optional Cable | 256 ft (78 m) |
| Drum Capacity - Recommended Cable | 371 ft (113 m) |
| Drum Diameter | 10 in (25 cm) |
| Drum Width | 11 in (27 cm) |
| Maximum Line Pull - Bare Drum | 40,000 lbs (18,144 kg) |
| Maximum Line Pull - Full Drum | 25,000 lbs (11,340 kg) |
| Maximum Line Speed - Bare Drum | 131 ft/min |
| Maximum Line Speed - Full Drum | 207 ft/min |
| Overall Width | 29 in (74 cm) |
| Rope Diameter - Optional | 1 in (2 cm) |
| Rope Diameter - Recommended | 1 in (2 cm) |
| Speed | Variable |
| Throat Clearance | 7 in (17 cm) |
| Weight | 1,345 lbs (610 kg) |
| Winch Drive | Hydrostatic |
| Winch Length | 28 in (71 cm) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon