2013 Caterpillar D6T RBLD For Sale in Salem, VA

Name: 2013 Caterpillar D6T RBLD
Brand: Caterpillar
SKU: 88298602
Price: 395000 USD
Availability: InStock

❮

❯

/ Save to Watch List

For Sale: $395,000.00 USD

Apply for Financing

Carter Machinery

Carter Machinery Dealer Info

Carter Machinery Website

Click here to email Carter Machinery.

Contact: Tim Eldridge

Click for Phone Number

Machine Info:

Hours:	10854
Serial Number:	KSB01564
Machine Location:	SALEM, VA
More Information:	https://catused.com/cu/10252875

Description:

ACCUGRADE, VPAT, AIR COND, UNHOOD, ALARM, BACKUP, ALTERNATOR, 150AMP, BASIC ARRANGEMENT, CAB, COUNTERWEIGHT, REAR, COVER, CONSOLE, D6T LGP VPAT TRACT, D6T LGP VPAT,DCA 6, DRAINS, ECOLOGY, POWERTRAIN, DRAWBAR, RIGID LONG, ENCLOSURE, ENGINE, ENG COOLANT,(-37C), ENGINE AR-COMPL, ENGINE, BASIC, FAN, LOW SPEED, FINAL DRIVE, XW/LGP, Fuel Tank Type - Single Wall, GUARD, BTM SEALED, GUARD, FUEL TANK, HANDLES, HD VPAT, HEATER, ENG 120V, HYDR, RIPPER VPAT, INSTRUCTIONS, DOM, LIGHT, 10, PREMIUM, NO REAR SCREEN, NO SEAL GROUP VPAT, OIL DRAIN, BASIC, Online Owner's Manual , PRECLEANER, BASIC, Protection 3year/5,000hr PT+HYD, Rebuild Dealer Rebuild Certified PT+HYD, STARTER,HEAVY DUTY, SWITCH, DISCONNECT, TC GP-W/TDR, TOWING DEVICE, PULL-HOOK, TRACK,790MM / 31" ES OFFSET S1, TRANSMISSION AR, UC, VPAT, S1, VPAT XW BULLDOZER, COMPLETE

Machine Details:

GENERAL CONDITION
Machine Starts and is Operable	Yes
S.O.S. (All Compartments)	Yes
GENERAL APPEARANCE
Cleaning Required	No
SAFETY ITEMS
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Air Conditioner	Good
Dash Console	Good
Gauges	Good
Interior Lights	Good
Switches	Good
Windshield Wipers	Good
ENGINE
Apparent Other Engine Damage	No
Blow By	No
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
Standard Radiator	Yes
ELECTRICAL, STARTING AND CHARGING SYSTEM
Alternator	Good
Batteries / Cables	Good
Starter	Good
Wiring	Good
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Steering Clutch	Good
Steering Operating Condition	Good
HYDRAULICS
Leaks - HYDRAULICS	Yes
BLADE
Cutting Edge & Bits	Good
Face / Moldboard	Good
Pins	Good
Push Arm	Good
Spill Rack	Good
Trunnions	Good
UNDERCARRIAGE
Track Frame - Left	Good

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Caterpillar D6T is a medium-size crawler dozer used in construction, earthmoving, land clearing, and site preparation. It is part of Caterpillar's D6 series and is designed for grading, pushing, and dozing material on rough terrain. The D6T typically features a diesel engine, hydrostatic or powershift drivetrain depending on configuration, and a tracked undercarriage for traction and stability. Common attachments include straight blades, semi-U blades, and ripper options. The model is used in road building, mining support, forestry, and general contractor applications where controlled blade power and reliable undercarriage performance are required.

Blades
Blade Type	N/A
Dimensions
Drawbar Height (Center Of Clevis) From Ground Face Of Shoes	23 in (58 cm)
Ground Clearance	1 ft (0 m)
Height	11 ft (3 m)
Height To Top Of Cab	11 ft (3 m)
Length	18 ft (5 m)
Length - Track On Ground	113 in (287 cm)
Length Of Track On Ground	9 ft (3 m)
Length W/O Blade	13 ft (4 m)
Weight	50,490 lbs (22,898 kg)
Width	8 ft (2 m)
Width Over Tracks	8 ft (2 m)
Engine
Bore	4 in (11 cm)
Displacement	537 cu in (8,800 cu cm)
Displacement	537 cu in (8,800 cu cm)
Engine Make	2,236
Engine Model	Cat C9 ACERT
Engine Model	C9 ACERT
Flywheel Power	200 hp (149 kw)
Gross Power	213 hp (159 kw)
Gross Power	213 hp (159 kw)
Gross Power - Iso 14396	220 hp (164 kw)
Net Power	185 hp (138 kw)
Net Power - Caterpillar	185 hp (138 kw)
Net Power - Din 70020	192 PS
Net Power - Eu 80/1269	185 hp (138 kw)
Net Power - Iso 9249	185 hp (138 kw)
Net Power - Sae J1349	183 hp (136 kw)
Number Of Cylinders	6
Power Measured @	1,850 rpm
Stroke	6 in (15 cm)
Engine - Std
Bore	4 in (11 cm)
Displacement	537 cu in (8,800 cu cm)
Engine Emissions	U.S. EPA Tier 3/EUStage IIIA/MLITStep 3
Engine Model	Cat C9 ACERT
Gross Power - Iso 14396	204 hp (152 kw)
Gross Power - Sae J1995	213 hp (159 kw)
Net Power - 80/1269/Eec	185 hp (138 kw)
Net Power - Iso 9249	185 hp (138 kw)
Net Power - Sae J1349	185 hp (138 kw)
Stroke	6 in (15 cm)
Engine - Xl/Lgp
Bore	4 in (11 cm)
Displacement	537 cu in (8,800 cu cm)
Engine Emissions	U.S. EPA Tier 3/EUStage IIIA/MLITStep 3
Engine Model	Cat C9 ACERT
Gross Power - Iso 14396	219 hp (163 kw)
Gross Power - Sae J1995	228 hp (170 kw)
Net Power - 80/1269/Eec	200 hp (149 kw)
Net Power - Iso 9249	200 hp (149 kw)
Net Power - Sae J1349	200 hp (149 kw)
Stroke	6 in (15 cm)
Engine - Xl/Xw/Lgp
Bore	4 in (11 cm)
Displacement	537 cu in (8,800 cu cm)
Gross Power	228 hp (170 kw)
Gross Power - Iso 14396	220 hp (164 kw)
Net Power - Caterpillar	200 hp (149 kw)
Net Power - Din 70020	207 PS
Net Power - Eu 80/1269	200 hp (149 kw)
Net Power - Iso 9249	200 hp (149 kw)
Net Power - Sae J1349	198 hp (148 kw)
Stroke	6 in (15 cm)
Hydraulic Controls - Main Relief Valve
Pressure Setting - Implement - Non-Vpat	3,147 psi
Pressure Setting - Implement - Vpat	3,545 psi
Pressure Setting - Steering	6,048 psi
Hydraulic Controls - Maximum Operating Pressure (Non-Vpat)
Bulldozer - Lift	2,799 psi
Bulldozer - Tilt	2,799 psi
Ripper	2,799 psi
Hydraulic Controls - Maximum Operating Pressure (Vpat)
Bulldozer - Angle	3,126 psi
Bulldozer - Lift	3,126 psi
Bulldozer - Tilt	3,126 psi
Ripper	2,799 psi
Hydraulic Controls - Pump
Angle Cylinder Flow - Vpat	45 gpm (170 lpm)
Lift Cylinder Flow	50 gpm (189 lpm)
Pump Output - Implement	50 gpm (189 lpm)
Pump Output - Steering	47 gpm (179 lpm)
Ripper Cylinder Flow	50 gpm (189 lpm)
Rpm At Rated Engine Speed - Implement	1,965 rpm
Rpm At Rated Engine Speed - Steering	2,625 rpm
Tilt Cylinder Flow	21 gpm (80 lpm)
Hydraulic System
Pump Flow Capacity	50 gpm (189 lpm)
Relief Valve Pressure	2,799 psi
Operational
Alternator Supplied Amperage	95 amps
Cooling System Fluid Capacity	19 gal (70 l)
Engine Oil Capacity	7 gal (28 l)
Final Drives Fluid Capacity	4 gal (14 l)
Fuel Capacity	112 gal (424 l)
Hydraulic Fluid Capacity	14 gal (51 l)
Operating Voltage	24 V
Operating Weight	44,418 lbs (20,148 kg)
Operating Weight	41,298 lbs (18,732 kg)
Powertrain Fluid Capacity	39 gal (146 l)
Ripper
Beam Cross Section	216 254 mm 8.5 10 in
Maximum Clearance Raised - Under Tip, Pinned In Bottom Hole	20 in (51 cm)
Maximum Penetration	20 in (50 cm)
Maximum Penetration Force	14,557 lbs (6,603 kg)
Number Of Pockets	3
Overall Beam Width	87 in (221 cm)
Pry-Out Force	20,137 lbs (9,134 kg)
Ripper Type	Fixed Parallelogram
Weight - Each Additional Shank	163 lbs (74 kg)
Weight - With One Shank	3,606 lbs (1,636 kg)
Service Refill Capacities
Cooling System	20 gal (77 l)
Engine Crankcase	7 gal (28 l)
Final Drive - Each	4 gal (14 l)
Fuel Tank	112 gal (424 l)
Hydraulic Tank	14 gal (51 l)
Pivot Shaft Compartment	1 gal (5 l)
Power Train	39 gal (146 l)
Roller Frames - Each	7 gal (25 l)
Standard Blade
Capacity	5 cu yd
Cutting Depth	20 in (51 cm)
Height	45 in (114 cm)
Width	14 ft (4 m)
Standards
Brakes	Brakes meet criterion SAE J/ISO 10265 MAR99
Cab	Meets appropriate standards as listed below.
Rops/Fops	ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II
Transmission
1.5 Forward	2 mph (4 kph)
1.5 Reverse	3 mph (5 kph)
2.0 Forward	3 mph (5 kph)
2.0 Reverse	4 mph (7 kph)
2.5 Forward	4 mph (7 kph)
2.5 Reverse	5 mph (9 kph)
3.0 Forward	5 mph (9 kph)
3.0 Reverse	7 mph (11 kph)
3.5 Forward	7 mph (12 kph)
3.5 Reverse	9 mph (15 kph)
Max Speed - Forward	7 mph (12 kph)
Max Speed - Reverse	9 mph (15 kph)
Number Of Forward Gears	3
Number Of Reverse Gears	3
Transmission Type	Powershift
Undercarriage
Ground Contact Area	4620 in2
Ground Pressure	9 psi
Ground Pressure	9 psi
Grouser Height	3 in (7 cm)
Number Of Shoes Per Side	39
Number Of Track Rollers Per Side	6
Standard Shoe Size	22 in (56 cm)
Track Pitch	8 in (20 cm)
Weights
Operating Weight - Lgp A	50,869 lbs (23,074 kg)
Operating Weight - Lgp S	48,588 lbs (22,039 kg)
Operating Weight - Lgp Vpat	53,178 lbs (24,121 kg)
Operating Weight - Xl A	44,795 lbs (20,319 kg)
Operating Weight - Xl Su	45,082 lbs (20,449 kg)
Operating Weight - Xl Vpat	51,041 lbs (23,152 kg)
Operating Weight - Xw A	47,576 lbs (21,580 kg)
Operating Weight - Xw Su	46,961 lbs (21,301 kg)
Operating Weight - Xw Vpat	52,031 lbs (23,601 kg)
Shipping Weight	36,974 lbs (16,771 kg)
Shipping Weight - Lgp A	41,471 lbs (18,811 kg)
Shipping Weight - Lgp S	41,471 lbs (18,811 kg)
Shipping Weight - Lgp Vpat	40,783 lbs (18,499 kg)
Shipping Weight - Std A	35,860 lbs (16,266 kg)
Shipping Weight - Std Su	42,834 lbs (19,429 kg)
Shipping Weight - Xl A	37,589 lbs (17,050 kg)
Shipping Weight - Xl Su	37,589 lbs (17,050 kg)
Shipping Weight - Xl Vpat	38,865 lbs (17,629 kg)
Shipping Weight - Xw A	39,174 lbs (17,769 kg)
Shipping Weight - Xw Su	39,174 lbs (17,769 kg)
Shipping Weight - Xw Vpat	39,591 lbs (17,958 kg)
Winch
Drum Capacity - 22 Mm (0.88 In)	290 ft (88 m)
Drum Capacity - 25 Mm (1.0 In)	220 ft (67 m)
Drum Capacity - 29 Mm (1.13 In)	220 ft (67 m)
Drum Diameter	10 in (25 cm)
Drum Width	13 in (33 cm)
Ferrule Size (O.D. Length)	54 67 mm 2.10 2.63 in
Flange Diameter	20 in (50 cm)
Increased Tractor Length - Lgp	16 in (40 cm)
Increased Tractor Length - Std	20 in (52 cm)
Increased Tractor Length - Xl/Xw	20 in (52 cm)
Maximum Bare Drum - Line Pull	89,800 lbs (40,733 kg)
Oil Capacity	18 gal (67 l)
Oil Refill Capacity	18 gal (67 l)
Optional Rope (25mm/1.0 In)	163 ft (50 m)
Rated Bare Drum Line Pull (1)	70,000 lbs (31,752 kg)
Rated Bare Drum Line Pull (2)	59,100 lbs (26,807 kg)
Recommended Rope (22mm/ 0.88in)	180 ft (55 m)
Weight	2,600 lbs (1,179 kg)
Winch And Bracket Length	48 in (121 cm)
Winch Case - Length	48 in (121 cm)
Winch Case - Width	38 in (98 cm)
Winch Model (1)	PA56 Optional Gearing
Winch Model (2)	PA56

Dealer Contact Info:

Carter Machinery

Carter Machinery Dealer Info

Carter Machinery Website

Email Carter Machinery.

Contact: Tim Eldridge

Click for Phone Number

2013 Caterpillar D6T RBLD For Sale in Salem, VA

Carter Machinery

Contact: Tim Eldridge

Machine Info:

Description:

Machine Details:

From the manufacturer:

Dealer Contact Info:

Carter Machinery

Contact: Tim Eldridge

Log In to Your CEG Account

Stay Ahead of the Market