Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-12-15 Click here to place a bid
| Hours: | 16407 |
| Serial Number: | CAT0963CCBBD00402 |
| Machine Location: | NORTH EAST, MD |
Supplied by HeavyEquipmentData.com →
| Dimensions | |
| Clearance At Full Height And Dump | 10 ft (3 m) |
| Ground Clearance | 1 ft (0 m) |
| Height | 11 ft (3 m) |
| Height To Top Of Cab | 11 ft (3 m) |
| Length | 22 ft (7 m) |
| Length To Front Of Track | 15 ft (5 m) |
| Length With Bucket On Ground | 21 ft (6 m) |
| Reach At Dump Height | 4 ft (1 m) |
| Weight | 41,939 lbs (19,023 kg) |
| Width | 8 ft (2 m) |
| Width To Outside Of Tracks | 8 ft (2 m) |
| Engine | |
| Aspiration | Turbocharged |
| Displacement | 439 cu in (7,200 cu cm) |
| Engine Make | 2,236 |
| Engine Model | 3126B ATAAC |
| Net Power | 158 hp (118 kw) |
| Number Of Cylinders | 6 |
| Power Measured @ | 2,000 rpm |
| General Specifications | |
| (optional track) Weight of General Purpose Bucket (Since 2001) | 95 in (2 m) |
| 1st (Since 2001) | 0-9.5 0-5.9 |
| 1st (Since 2006) | 0-10 0-6.2 |
| 2nd (Since 2001) | Infinitely |
| 3rd (Since 2001) | Variable |
| A Forward Dump Clearance (Since 2001) | 119 in (3 m) |
| A Forward Dump Clearance (Since 2006) | 109 in (2,780 mm) |
| A Height to Top of Seat (Since 2001) | 110 in (3 m) |
| A Height to Top of Seat (Since 2006) | 112 in (2,843 mm) |
| and Additional Hydraulics (Since 2001) | 4,690 lbs (2,128 kg) |
| Approx. Operating Weight (Since 1999) | 41,940 lbs (19,020 kg) |
| Approx. Operating Weight (Since 2003) | 43,096 lbs (19,589 kg) |
| B Bottom Dump Clearance (Since 2001) | 138 in (4 m) |
| B Bottom Dump Clearance (Since 2006) | 136 in (3,437 mm) |
| B Height to Top of Stack (Since 2001) | 130 in (3 m) |
| B Height to Top of Stack (Since 2006) | 109 in (2,768 mm) |
| Bore (Since 2001) | 4 in (105 mm) |
| Bore (Since 2006) | 4 in (110 mm) |
| Bottom Dump Reach (Since 2001) | 24 in (612 mm) |
| Bottom Dump Reach (Since 2006) | 24 in (604 mm) |
| C Height to Top of ROPS (Since 2001) | 131 in (3 m) |
| C Height to Top of ROPS (Since 2006) | 133 in (3,390 mm) |
| C Hinge Pin Height (Since 2001) | 155 in (4 m) |
| C Hinge Pin Height (Since 2006) | 155 in (3,930 mm) |
| Closure Force, Clamp to Cutting Edge (Since 2006) | 16,250 lbf (72 kN) |
| Closure Force, Clamp to Cutting Edge Weight of Bucket with Teeth, Segments (Since 2001) | 16,250 lbf (72 kN) |
| D Hinge Pin Height at Carry Position (Since 2001) | 18 in (467 mm) |
| D Hinge Pin Height at Carry Position (Since 2006) | 19 in (474 mm) |
| D Overall Height (Since 2001) | 232 in (6 m) |
| D Overall Height (Since 2006) | 133 in (3,390 mm) |
| Dimensions Width (Since 1999) | 95 in (2 m) |
| Displacement (Since 2006) | 439 cu in (7 L) |
| Engine Displacement (Since 2001) | 403 cu in (7 L) |
| Engine Model (Since 2001) | 3116 TA |
| Engine Model (Since 2006) | 3126B ATAAC |
| Equipped With Wide Track Shoe - (Specs that differ from above) (Since 2001) | 963C |
| Equipped With Wide Track Shoe - Ground Contact Area (Since 2001) | 4,184 sq in (3 sq m) |
| Equipped With Wide Track Shoe - Ground Pressure (Since 2001) | 10 psi (70 kPa) |
| Equipped With Wide Track Shoe - Operating Weight (Since 2001) | 42,480 lbs (19,270 kg) |
| Equipped With Wide Track Shoe - Track Gauge (Since 2001) | 73 in (2 m) |
| Equipped With Wide Track Shoe - Width of Track Shoe (Since 2001) | 22 in (550 mm) |
| Equipped With Wide Track Shoe - Width Without Bucket (Since 2001) | 94 in (2 m) |
| F Forward Dump Reach (Since 2001) | 46 in (1,161 mm) |
| F Forward Dump Reach (Since 2006) | 46 in (1,178 mm) |
| F Rollback at Carry Height (Since 2001) | 50 deg |
| F Rollback at Carry Height (Since 2006) | 51 deg |
| Flywheel Horsepower (Since 1999) | 160 hp (119 kw) |
| Flywheel Horsepower (Since 2003) | 158 hp (118 kw) |
| Flywheel Power (Since 2001) | 160 hp (119 kW) |
| Flywheel Power (Since 2006) | 158 hp (118 kW) |
| Fuel Tank Refill Capacity (Since 2001) | 83 US gal (315 L) |
| G Digging Depth (Since 2001) | 9 in (219 mm) |
| G Digging Depth (Since 2006) | 8 in (204 mm) |
| G Rollback at Ground Level (Since 2001) | 42 deg |
| G Rollback at Ground Level (Since 2006) | 43 deg |
| Grading Angle (Bare Edge) (Since 2001) | 68 deg |
| Ground Clearance (Since 2001) | 15 in (390 mm) |
| Ground Clearance (Since 2006) | 16 in (397 mm) |
| Ground Contact Area - (with Standard Shoes) (Since 2006) | 4,184 sq in (3 sq m) |
| Ground Contact Area - (With Std. Shoe) (Since 2001) | 3,425 sq in (2 sq m) |
| Ground Pressure (Since 2001) | 12 psi (84 kPa) |
| Ground Pressure (Since 2006) | 11 psi (72 kPa) |
| H Bucket Opening (Since 2001) | 49 in (1,260 mm) |
| H Bucket Opening (Since 2006) | 50 in (1,260 mm) |
| Height (Since 1999) | 131 in (3 m) |
| Height (Since 2003) | 134 in (3 m) |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Dump (Since 2001) | 1 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Dump (Since 2006) | 1 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Lower (Empty, Float Down) (Since 2001) | 2 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Lower (Empty, Float Down) (Since 2006) | 2 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Raise (Since 2001) | 5 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Raise (Since 2006) | 7 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Total (Since 2001) | 8 sec |
| Hydraulic System Refill Capacity (Since 2001) | 37 US gal (140 L) |
| Hydraulic System Refill Capacity (Since 2006) | 18 US gal (68 L) |
| Installed Weights - Each Additional Shank (Since 2006) | 3 shanks std. |
| Installed Weights - Ripper with Standard Shanks (Since 2006) | 1,569 lbs (712 kg) |
| Length (Since 1999) | 182 in (5 m) |
| Length of Track on Ground (Since 2001) | 97 in (2 m) |
| Length of Track on Ground (Since 2006) | 97 in (2,438 mm) |
| Maximum ground - clearance under tip (shank pinned in bottom hole) (Since 2001) | 26 in (660 mm) |
| Maximum Ground Clearance - under Tip (shank pinned in bottom hole) (Since 2006) | 23 in (595 mm) |
| Maximum ramp angle, - ripper up (shank pinned in bottom hole) (Since 2001) | 19 deg |
| Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (Since 2006) | 17 deg |
| Maximum reach at - ground line (Since 2001) | 46 in (1,160 mm) |
| Maximum Reach at Ground Line (Since 2006) | 46 in (1,160 mm) |
| No. Cylinders (Since 2001) | 6 |
| Number of Pockets (Since 2001) | 3 |
| Operating Weight (Since 2001) | 41,940 lbs (19,020 kg) |
| Operating Weight (Since 2006) | 43,096 lbs (19,589 kg) |
| Pocket Spacing (Since 2001) | 35 in (896 mm) |
| Pocket Spacing (Since 2006) | 35 in (895 mm) |
| Product Identification Prefix (Since 1999) | 2DS |
| Product Identification Prefix (Since 2003) | BBD |
| Pryout Force (Since 2006) | 30,637 lbf (13,897 kgf) |
| Rated Capacity (Since 1999) | 2 cu yd (2 cu m) |
| Rated Capacity (Since 2003) | 3 cu yd (2 cu m) |
| Rated Engine RPM (Since 2001) | 2,200 rpm |
| Rated Engine RPM (Since 2006) | 2,000 rpm |
| Reach at 2133 mm (7'0") Height (Since 2001) | 62 in (1,590 mm) |
| Reach at 2133 mm (7'0") Height (Since 2006) | 68 in (1,725 mm) |
| Remarks (Since 2003) | SystemOne U/C |
| Ripper Beam Overall width (Since 2001) | 77 in (2 m) |
| Ripper Beam Overall Width (Since 2006) | 77 in (1,951 mm) |
| Ripper Forces Penetration Force (Since 2006) | 14,076 lbf (6,385 kgf) |
| Ripper Shank Maximum penetration depth (Since 2001) | 12 in (295 mm) |
| Ripper Shank Maximum Penetration Depth (Since 2006) | 12 in (295 mm) |
| Ripper-Scarifier Type (Since 2001) | Radial |
| Rollback at Maximum Lift (Since 2001) | 59 deg |
| Shank Gauge (Since 2001) | 71 in (2 m) |
| Shank Gauge (Since 2006) | 70 in (1,790 mm) |
| Speeds Forward/Reverse (Since 2006) | km/h mph |
| Stroke (Since 2001) | 5 in (127 mm) |
| Tilt Back at Ground Level (Since 2001) | 42 deg |
| Tilt Back at Ground Level (Since 2006) | 46 deg |
| Track Gauge (Since 2001) | 73 in (2 m) |
| Track Gauge (Since 2006) | 73 in (1,850 mm) |
| Track Rollers (Each Side) (Since 2001) | 6 |
| w/Teeth & Segments (Since 2001) | 3,550 lbs (1,610 kg) |
| Weight of Bucket with Teeth, Segments and Additional Hydraulics (Since 2006) | 4,690 lbs (2,128 kg) |
| Width of Standard Track Shoe (Since 2001) | 18 in (450 mm) |
| Width of Standard Track Shoe (Since 2006) | 22 in (550 mm) |
| Width Without Bucket (Since 2001) | 91 in (2 m) |
| Width without Bucket (optional track) (Since 2006) | 91 in (2,300 mm) |
| Width without Bucket (standard track) (Since 2006) | 94 in (2,400 mm) |
| Width Without Bucket (std. track) (Since 2001) | 91 in (2 m) |
| Width without Bucket - (with Standard Shoes) (Since 2006) | 95 in (2,400 mm) |
| with Teeth & Segments (Since 2006) | 3,550 lbs (1,610 kg) |
| Hydraulic | |
| Dump Time | 1 sec |
| Lower Time | 2 sec |
| Pump Flow Capacity | 57 gpm (215 lpm) |
| Pump Type | VANE |
| Raise Time | 7 sec |
| Relief Valve Pressure | 3,045 psi |
| Operational | |
| Alternator Supplied Amperage | 70 amps |
| Breakout Force - Std Bucket | 43,133 lbs (19,565 kg) |
| Bucket Capacity - Heaped | 3 cu yd |
| Bucket Capacity - Struck | 3 cu yd |
| Cooling System Fluid Capacity | 8 gal (31 l) |
| Engine Oil Capacity | 7 gal (28 l) |
| Final Drive Fluid Capacity - Each | 4 gal (15 l) |
| Fuel Capacity | 83 gal (315 l) |
| Hydraulic System Fluid Capacity | 42 gal (160 l) |
| Max Speed | 6 mph (10 kph) |
| Operating Voltage | 12 V |
| Operating Weight | 43,186 lbs (19,589 kg) |
| Static Tipping Load | 29,904 lbs (13,564 kg) |
| Undercarriage | |
| Ground Contact Area | 4185.01 in2 |
| Ground Pressure | 11 psi |
| Length Of Track On Ground | 8 ft (2 m) |
| Number Of Shoes Per Side | 37 |
| Number Of Track Rollers Per Side | 6 |
| Track Gauge | 73 in (185 cm) |
| Track Shoe Width | 22 in (55 cm) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon