Create a CEG Account  /  CEG Login
☰

2015 Caterpillar 963K For Sale in JACKSON, MN

2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K
2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K 2015 Caterpillar 963K

/ Save to Watch List

Email Dealer


For Sale: $82,900.00 USD

Apply for Financing


Machine Info:

Hours:8674
Serial Number:LBL00183
Machine Location:JACKSON, MN
More Information:https://catused.com/cu/10125079

Description:

963K HRC TRACK LOADER, AIR INLET, PRECLEANER, TURBINE, ANTIFREEZE, -50C (-58F), BUCKET-MP, 2.6 CYD, HD PACKAGE, CAB, DELUXE, COLD WEATHER, 120V, COMPLETE STORAGE PROTECTION, EASY ACCESS PACKAGE, EMA, ENGINE S/N D8T09480, FAN, DEMAND, REVERSING, GUARD, IDLER, GUARD, TOP/BOTTOM, FINAL DRIVE, HYDRAULIC 3V,MP JOYSTICK, PACK, HYDRAULIC OIL, STANDARD, LANE 3 ORDER, LIGHTS ADDITIONAL, GUARDED, LINES IMPLEMENT, STANDARD, NO BUMPER, PACK-N.I. BUCKET OR DISMOUNTED, PRODUCT LINK, CELLULAR PL641, RADIO, AM/FM/AUX/USB/BLUETOOTH, REGIONAL PACKAGE ADSD-N, SEAT TLV2,S/S ISOLATOR,HEATED, SEDIMENT PUMP, FUEL TANK, SERVICE PACKAGE, EXTENDED, TANK, FUEL, STANDARD, TRACK 18" CTR-H,ES SG E. SALT, TRANSMISSION CONTROL V-LEVER, WASTE ES PACKAGE, E. SALT

Machine Details:

GENERAL APPEARANCE
Notes - GENERAL APPEARANCETHE MACHINE WORKED IN A LANDFILL.
SAFETY ITEMS
ROPSYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Back Up AlarmYes
Current O&MMYes
ROPS Certification PlateYes
ENGINE
Blow ByNo
Compression in RadiatorNo
Emissions DecalYes
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Notes - STEERINGTHE MACHINE IS STEERING NORMAL WITH GOOD CONTROL.
BRAKE
Control ValveGood
Operating Condition - BRAKEGood
Parking BrakeGood
Type (Pedal, Lever)Good
HYDRAULICS
Notes - HYDRAULICSTHE HYDRAULICS ARE FUNCTIONING NORMAL.
BUCKET
Notes - BUCKETTHE TOP SPILL GUARD IS BENT.
UNDERCARRIAGE
Equalizer BarTHE EQUALIZER BAR HAS PLAY IN THE OUTER JOINTS. THE CENTER IS MUCH BETTER.
Link Part NumberDCF 1-0780 SALT LINKS.
Notes - UNDERCARRIAGENEW RAILS & SEGMENTS INSTALLED AT 7,107 HOURS.
Track Shoes18 INCH MODERATE SERVICE SINGLE GROUSER SHOES.
FINAL DRIVES
Notes - FINAL DRIVES CURRENTLY BOTH OILS ARE LEVEL WITH MATERIAL ON MAGNETS NORMAL OVERALL.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1THE MACHINES ENGINE ONLY HAS 1,130 HRS ON IT. THE HYSTAT IS PERFORMING NORMAL IN ALL SPEED SETTINGS. THE U/C HAS SEEN RECENT WORK.


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The Caterpillar 963K is a crawler loader designed for material handling, site preparation, stockpiling, and general earthmoving applications. It combines tracked undercarriage traction with a front loader bucket for loading, grading, backfilling, and cleanup work on construction, quarry, and industrial sites. The 963K is part of Caterpillar's K-series crawler loader line and is commonly used where stable operation on soft, uneven, or muddy ground is required. Typical features include a diesel engine, hydrostatic drive, and operator cab controls suited for loader productivity and maneuverability. The model is recognized for versatility in loading and dozing tasks across demanding jobsite conditions.
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Buckets
Capacity - General Purpose 3 cu yd
Capacity - Multi-Purpose 3 cu yd
Capacity - Performance Series 4 cu yd
Width - General Purpose 103 in (261 cm)
Width - Multi-Purpose 101 in (257 cm)
Width - Performance Series 107 in (271 cm)
Dimensions
Bucket Height - Carry Position 18 in (46 cm)
Carry Position Approach Angle 15 degrees
Clearance At Full Lift Height And 45 Degrees Dump* 115 in (292 cm)
Digging Depth* 5 in (14 cm)
Grading Angle 63 degrees
Ground Clearance 2 ft (0 m)
Height - Bucket Hinge Pin 155 in (394 cm)
Height - Top Of Stack 116 in (294 cm)
Machine Height - Top Of Cab 131 in (332 cm)
Maximum Rollback - Ground/Carry Position 43 degrees/50 degrees
Maximum Rollback/Dump - Fully Raised 52 degrees/53 degrees
Note *With General Purpose bucket and extra duty teeth.
Overall Machine Height - Bucket Fully Raised 213 in (540 cm)
Overall Machine Length* 276 in (700 cm)
Overall Machine Width Without Bucket: With Standard Tracks - 550 Mm (21.6 In) Shoes 95 in (240 cm)
Ramp Angle 29 degrees
Reach At Full Lift Height And 45 Degrees Dump* 54 in (137 cm)
Engine
Emissions U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Engine Model Cat C7.1 ACERT
Flywheel Power 193 hp (144 kw)
Net Power - Iso 9249/Sae J1349 193 hp (144 kw)
Net Power - Iso 9249/Sae J1349 (Din) 196 hp (146 kw)
Note (1) All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel re
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Operational
Operating Weight 44,138 lbs (20,021 kg)
Service Refill Capacities
Def Tank(1) 4 gal (16 l)
Fuel Tank 85 gal (320 l)
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Undercarriage
Ground Contact Area - Optional Shoe 4013 in2
Ground Contact Area - Standard Shoe 4900 in2
Ground Pressure - Optional Shoe 11 psi
Ground Pressure - Standard Shoe 9 psi
Ground Pressure(1) - Optional Shoe 11 psi
Ground Pressure(1) - Standard Shoe 9 psi
Grouser Height - Double Grouser 2 in (4 cm)
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Track Gauge 6 ft (2 m)
Track On Ground 100 in (254 cm)
Track Rollers/Shoes - Each Side Jul-38
Track Shoe Width - Optional 18 in (46 cm)
Track Shoe Width - Standard 22 in (56 cm)
Weights
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Weight(1) 44,771 lbs (20,308 kg)

Dealer Contact Info:

Ziegler CAT

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.