| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
| Buckets |
|
Capacity - General Purpose |
3 cu yd |
|
Capacity - Multi-Purpose |
3 cu yd |
|
Capacity - Performance Series |
4 cu yd |
|
Width - General Purpose |
103 in (261 cm)
|
|
Width - Multi-Purpose |
101 in (257 cm)
|
|
Width - Performance Series |
107 in (271 cm)
|
| Dimensions |
|
Bucket Height - Carry Position |
18 in (46 cm)
|
|
Carry Position Approach Angle |
15 degrees |
|
Clearance At Full Lift Height And 45 Degrees Dump* |
115 in (292 cm)
|
|
Digging Depth* |
5 in (14 cm)
|
|
Grading Angle |
63 degrees |
|
Ground Clearance |
2 ft (0 m)
|
|
Height - Bucket Hinge Pin |
155 in (394 cm)
|
|
Height - Top Of Stack |
116 in (294 cm)
|
|
Machine Height - Top Of Cab |
131 in (332 cm)
|
|
Maximum Rollback - Ground/Carry Position |
43 degrees/50 degrees |
|
Maximum Rollback/Dump - Fully Raised |
52 degrees/53 degrees |
|
Note |
*With General Purpose bucket and extra duty teeth. |
|
Overall Machine Height - Bucket Fully Raised |
213 in (540 cm)
|
|
Overall Machine Length* |
276 in (700 cm)
|
|
Overall Machine Width Without Bucket: With Standard Tracks - 550 Mm (21.6 In) Shoes |
95 in (240 cm)
|
|
Ramp Angle |
29 degrees |
|
Reach At Full Lift Height And 45 Degrees Dump* |
54 in (137 cm)
|
| Engine |
|
Emissions |
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA |
|
Engine Model |
Cat C7.1 ACERT |
|
Flywheel Power |
193 hp (144 kw)
|
|
Net Power - Iso 9249/Sae J1349 |
193 hp (144 kw)
|
|
Net Power - Iso 9249/Sae J1349 (Din) |
196 hp (146 kw)
|
|
Note (1) |
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel re |
|
Note (2) |
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| General Specifications |
|
1st (Since 2016)
|
0-10 0-6.2 |
|
1st (2017)
|
0-10 0-6.2 |
|
1st (2018)
|
0-10 0-6.2 |
|
1st (2019)
|
0-10 0-6.2 |
|
2133 mm (7'0") Clearance (Since 2016)
|
63 in (1,607 mm)
|
|
2133 mm (7'0") Clearance (2017)
|
63 in (1,607 mm)
|
|
2133 mm (7'0") Clearance (2018)
|
63 in (1,607 mm)
|
|
2133 mm (7'0") Clearance (2019)
|
63 in (1,607 mm)
|
|
2nd (Since 2016)
|
Infinitely |
|
2nd (2017)
|
Infinitely |
|
2nd (2018)
|
Infinitely |
|
2nd (2019)
|
Infinitely |
|
3rd (Since 2016)
|
Variable |
|
3rd (2017)
|
Variable |
|
3rd (2018)
|
Variable |
|
3rd (2019)
|
Variable |
|
450 mm (18") (Since 2016)
|
91 in (2,300 mm)
|
|
450 mm (18") (2017)
|
91 in (2,300 mm)
|
|
450 mm (18") (2018)
|
91 in (2,300 mm)
|
|
450 mm (18") (2019)
|
91 in (2,300 mm)
|
|
45° Discharge (Since 2016)
|
44 in (1,119 mm)
|
|
45° Discharge (2017)
|
44 in (1,119 mm)
|
|
45° Discharge (2018)
|
44 in (1,119 mm)
|
|
45° Discharge (2019)
|
44 in (1,119 mm)
|
|
550 mm (21.6") (Since 2016)
|
95 in (2,400 mm)
|
|
550 mm (21.6") (2017)
|
95 in (2,400 mm)
|
|
550 mm (21.6") (2018)
|
95 in (2,400 mm)
|
|
550 mm (21.6") (2019)
|
95 in (2,400 mm)
|
|
A Forward Dump Clearance (Since 2016)
|
118 in (3,000 mm)
|
|
A Forward Dump Clearance (2017)
|
118 in (3,000 mm)
|
|
A Forward Dump Clearance (2019)
|
118 in (3,000 mm)
|
|
A Forward Dump Clearance* (Since 2018)
|
118 in (3,000 mm)
|
|
A Height to Top of Seat (Since 2016)
|
111 in (2,808 mm)
|
|
A Height to Top of Seat (2017)
|
111 in (2,808 mm)
|
|
A Height to Top of Seat (2018)
|
111 in (2,808 mm)
|
|
A Height to Top of Seat (2019)
|
111 in (2,808 mm)
|
|
B Bottom Dump Clearance (Since 2016)
|
136 in (3,450 mm)
|
|
B Bottom Dump Clearance (2017)
|
136 in (3,450 mm)
|
|
B Bottom Dump Clearance (2019)
|
136 in (3,450 mm)
|
|
B Bottom Dump Clearance* (Since 2018)
|
136 in (3,450 mm)
|
|
B Height to Top of Stack (Since 2016)
|
116 in (2,940 mm)
|
|
B Height to Top of Stack (2017)
|
116 in (2,940 mm)
|
|
B Height to Top of Stack (2018)
|
116 in (2,940 mm)
|
|
B Height to Top of Stack (2019)
|
116 in (2,940 mm)
|
|
Bore (Since 2016)
|
4 in (105 mm)
|
|
Bore (2017)
|
4 in (105 mm)
|
|
Bore (2018)
|
4 in (105 mm)
|
|
Bore (2019)
|
4 in (105 mm)
|
|
Bottom Dump Reach (Since 2016)
|
25 in (627 mm)
|
|
Bottom Dump Reach (2017)
|
25 in (627 mm)
|
|
Bottom Dump Reach (2018)
|
25 in (627 mm)
|
|
Bottom Dump Reach (2019)
|
25 in (627 mm)
|
|
Breakout Force (Since 2016)
|
43,545 lbf (194 kN)
|
|
Breakout Force (2017)
|
43,545 lbf (194 kN)
|
|
Breakout Force (2019)
|
43,545 lbf (194 kN)
|
|
Breakout Force** (Since 2018)
|
43,545 lbf (194 kN)
|
|
Bucket Width (Since 2016)
|
99 in (2,515 mm)
|
|
Bucket Width (2017)
|
99 in (2,515 mm)
|
|
Bucket Width (2019)
|
99 in (2,515 mm)
|
|
Bucket Width* (Since 2018)
|
99 in (2,515 mm)
|
|
C Height to Top of ROPS (Since 2016)
|
131 in (3,325 mm)
|
|
C Height to Top of ROPS (2017)
|
131 in (3,325 mm)
|
|
C Height to Top of ROPS (2018)
|
131 in (3,325 mm)
|
|
C Height to Top of ROPS (2019)
|
131 in (3,325 mm)
|
|
C Hinge Pin Height (Since 2016)
|
155 in (3,940 mm)
|
|
C Hinge Pin Height (2017)
|
155 in (3,940 mm)
|
|
C Hinge Pin Height (2019)
|
155 in (3,940 mm)
|
|
C Hinge Pin Height* (Since 2018)
|
155 in (3,940 mm)
|
|
D Hinge Pin Height at Carry Position (Since 2016)
|
18 in (457 mm)
|
|
D Hinge Pin Height at Carry Position (2017)
|
18 in (457 mm)
|
|
D Hinge Pin Height at Carry Position (2018)
|
18 in (457 mm)
|
|
D Hinge Pin Height at Carry Position (2019)
|
18 in (457 mm)
|
|
D Overall Height (Since 2016)
|
209 in (5,308 mm)
|
|
D Overall Height (2017)
|
209 in (5,308 mm)
|
|
D Overall Height (2018)
|
209 in (5,308 mm)
|
|
D Overall Height (2019)
|
209 in (5,308 mm)
|
|
Diesel Exhaust Fluid Refill Capacity (Since 2017)
|
4 US gal (16 L)
|
|
Diesel Exhaust Fluid Refill Capacity (2018)
|
4 US gal (16 L)
|
|
Diesel Exhaust Fluid Refill Capacity (2019)
|
4 US gal (16 L)
|
|
Digging Depth (Since 2016)
|
8 in (191 mm)
|
|
Digging Depth (2017)
|
8 in (191 mm)
|
|
Digging Depth (2018)
|
8 in (191 mm)
|
|
Digging Depth (2019)
|
8 in (191 mm)
|
|
Dump Clearance @ Full Lift and 45° Discharge (Since 2016)
|
112 in (2,840 mm)
|
|
Dump Clearance @ Full Lift and 45° Discharge (2017)
|
112 in (2,840 mm)
|
|
Dump Clearance @ Full Lift and 45° Discharge (2018)
|
112 in (2,840 mm)
|
|
Dump Clearance @ Full Lift and 45° Discharge (2019)
|
112 in (2,840 mm)
|
|
Emission Standards (Since 2016)
|
Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
|
Emission Standards (2017)
|
Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
|
Emission Standards (2018)
|
Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
|
Emission Standards (2019)
|
Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
|
Engine Displacement (Since 2016)
|
428 cu in (7 L)
|
|
Engine Displacement (2017)
|
428 cu in (7 L)
|
|
Engine Displacement (2018)
|
428 cu in (7 L)
|
|
Engine Displacement (2019)
|
428 cu in (7 L)
|
|
Engine Model (Since 2016)
|
C7.1 ACERT |
|
Engine Model (2017)
|
C7.1 ACERT |
|
Engine Model (2018)
|
C7.1 ACERT |
|
Engine Model (2019)
|
C7.1 ACERT |
|
F Forward Dump Reach (Since 2016)
|
43 in (1,079 mm)
|
|
F Forward Dump Reach (2017)
|
43 in (1,079 mm)
|
|
F Forward Dump Reach (2019)
|
43 in (1,079 mm)
|
|
F Forward Dump Reach* (Since 2018)
|
43 in (1,079 mm)
|
|
F Rollback at Carry Height (Since 2016)
|
50 deg |
|
F Rollback at Carry Height (2017)
|
50 deg |
|
F Rollback at Carry Height (2018)
|
50 deg |
|
F Rollback at Carry Height (2019)
|
50 deg |
|
Face of Shoes (Since 2016)
|
19 in (471 mm)
|
|
Face of Shoes (2017)
|
19 in (471 mm)
|
|
Face of Shoes (2018)
|
19 in (471 mm)
|
|
Face of Shoes (2019)
|
19 in (471 mm)
|
|
Flywheel Power (Since 2016)
|
193 hp (144 kW)
|
|
Flywheel Power (2017)
|
193 hp (144 kW)
|
|
Flywheel Power (2018)
|
193 hp (144 kW)
|
|
Flywheel Power (2019)
|
193 hp (144 kW)
|
|
Fuel Tank Refill Capacity (Since 2016)
|
85 US gal (320 L)
|
|
Fuel Tank Refill Capacity (2017)
|
85 US gal (320 L)
|
|
Fuel Tank Refill Capacity (2018)
|
85 US gal (320 L)
|
|
Fuel Tank Refill Capacity (2019)
|
85 US gal (320 L)
|
|
G Digging Depth (Since 2016)
|
6 in (161 mm)
|
|
G Digging Depth (2017)
|
6 in (161 mm)
|
|
G Digging Depth (2018)
|
6 in (161 mm)
|
|
G Digging Depth (2019)
|
6 in (161 mm)
|
|
G Rollback at Ground Level (Since 2016)
|
43 deg |
|
G Rollback at Ground Level (2017)
|
43 deg |
|
G Rollback at Ground Level (2018)
|
43 deg |
|
G Rollback at Ground Level (2019)
|
43 deg |
|
Grading Angle (Bare Edge) (Since 2016)
|
63 deg |
|
Grading Angle (Bare Edge) (2017)
|
63 deg |
|
Grading Angle (Bare Edge) (2018)
|
63 deg |
|
Grading Angle (Bare Edge) (2019)
|
63 deg |
|
Ground Clearance (Since 2016)
|
19 in (471 mm)
|
|
Ground Clearance (2017)
|
19 in (471 mm)
|
|
Ground Clearance (2018)
|
19 in (471 mm)
|
|
Ground Clearance (2019)
|
19 in (471 mm)
|
|
Ground Clearance from Face of Shoes (Since 2016)
|
19 in (471 mm)
|
|
Ground Clearance from Face of Shoes (2017)
|
19 in (471 mm)
|
|
Ground Clearance from Face of Shoes (2018)
|
19 in (471 mm)
|
|
Ground Clearance from Face of Shoes (2019)
|
19 in (471 mm)
|
|
Ground Contact Area (with Standard Shoes) (Since 2016)
|
4,340 sq in (3 sq m)
|
|
Ground Contact Area (with Standard Shoes) (2017)
|
4,340 sq in (3 sq m)
|
|
Ground Contact Area (with Standard Shoes) (2018)
|
4,340 sq in (3 sq m)
|
|
Ground Contact Area (with Standard Shoes) (2019)
|
4,340 sq in (3 sq m)
|
|
Ground Pressure (Since 2016)
|
10 psi (72 kPa)
|
|
Ground Pressure (2017)
|
10 psi (72 kPa)
|
|
Ground Pressure (2018)
|
10 psi (72 kPa)
|
|
Ground Pressure (2019)
|
10 psi (72 kPa)
|
|
H Bucket Opening (Since 2016)
|
49 in (1,248 mm)
|
|
H Bucket Opening (2017)
|
49 in (1,248 mm)
|
|
H Bucket Opening (2018)
|
49 in (1,248 mm)
|
|
H Bucket Opening (2019)
|
49 in (1,248 mm)
|
|
Height (Since 2016)
|
7 in (165 mm)
|
|
Height (2017)
|
7 in (165 mm)
|
|
Height (2018)
|
7 in (165 mm)
|
|
Height (2019)
|
7 in (165 mm)
|
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Dump (Since 2016)
|
1 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Dump (2017)
|
1 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Dump (2018)
|
1 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Dump (2019)
|
1 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Lower (Empty, Float Down) (Since 2016)
|
2 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Lower (Empty, Float Down) (2017)
|
2 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Lower (Empty, Float Down) (2018)
|
2 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Lower (Empty, Float Down) (2019)
|
2 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Raise (Since 2016)
|
6 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Raise (2017)
|
6 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Raise (2018)
|
6 sec |
|
Hydraulic Cycle Time, Bucket Empty, in Seconds - Raise (2019)
|
6 sec |
|
Hydraulic System Refill Capacity (Since 2016)
|
24 US gal (90 L)
|
|
Hydraulic System Refill Capacity (2017)
|
24 US gal (90 L)
|
|
Hydraulic System Refill Capacity (2018)
|
24 US gal (90 L)
|
|
Hydraulic System Refill Capacity (2019)
|
24 US gal (90 L)
|
|
Installed Weights - Each Additional Shank (Since 2016)
|
79 lbs (36 kg)
|
|
Installed Weights - Each Additional Shank (2017)
|
79 lbs (36 kg)
|
|
Installed Weights - Each Additional Shank (2018)
|
79 lbs (36 kg)
|
|
Installed Weights - Each Additional Shank (2019)
|
79 lbs (36 kg)
|
|
Installed Weights - Ripper with Standard Shank (1 shank) (Since 2016)
|
1,572 lbs (713 kg)
|
|
Installed Weights - Ripper with Standard Shank (1 shank) (2017)
|
1,572 lbs (713 kg)
|
|
Installed Weights - Ripper with Standard Shank (1 shank) (2018)
|
1,572 lbs (713 kg)
|
|
Installed Weights - Ripper with Standard Shank (1 shank) (2019)
|
1,572 lbs (713 kg)
|
|
Length (Since 2016)
|
8 in (211 mm)
|
|
Length (2017)
|
8 in (211 mm)
|
|
Length (2018)
|
8 in (211 mm)
|
|
Length (2019)
|
8 in (211 mm)
|
|
Length of Track on Ground (Since 2016)
|
100 in (2,543 mm)
|
|
Length of Track on Ground (2017)
|
100 in (2,543 mm)
|
|
Length of Track on Ground (2018)
|
100 in (2,543 mm)
|
|
Length of Track on Ground (2019)
|
100 in (2,543 mm)
|
|
Maximum Ground Clearance under Tip - (shank pinned in bottom hole) (Since 2016)
|
26 in (667 mm)
|
|
Maximum Ground Clearance under Tip - (shank pinned in bottom hole) (2017)
|
26 in (667 mm)
|
|
Maximum Ground Clearance under Tip - (shank pinned in bottom hole) (2018)
|
26 in (667 mm)
|
|
Maximum Ground Clearance under Tip - (shank pinned in bottom hole) (2019)
|
26 in (667 mm)
|
|
Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (Since 2016)
|
17 deg |
|
Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (2017)
|
17 deg |
|
Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (2018)
|
17 deg |
|
Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (2019)
|
17 deg |
|
Maximum Reach at Ground Line - (from track to teeth on ground) (Since 2016)
|
62 in (1,585 mm)
|
|
Maximum Reach at Ground Line - (from track to teeth on ground) (2017)
|
62 in (1,585 mm)
|
|
Maximum Reach at Ground Line - (from track to teeth on ground) (2018)
|
62 in (1,585 mm)
|
|
Maximum Reach at Ground Line - (from track to teeth on ground) (2019)
|
62 in (1,585 mm)
|
|
Net Power (Since 2021)
|
193 hp (144 kw)
|
|
No. Cylinders (Since 2016)
|
6 |
|
No. Cylinders (2017)
|
6 |
|
No. Cylinders (2018)
|
6 |
|
No. Cylinders (2019)
|
6 |
|
Number of Pockets (Since 2016)
|
3 |
|
Number of Pockets (2017)
|
3 |
|
Number of Pockets (2018)
|
3 |
|
Number of Pockets (2019)
|
3 |
|
Operating Weight (Since 2016)
|
46,268 lbs (20,987 kg)
|
|
Operating Weight (2017)
|
46,268 lbs (20,987 kg)
|
|
Operating Weight (Since 2018)
|
44,771 lbs (20,308 kg)
|
|
Operating Weight (Since 2019)
|
46,268 lbs (20,987 kg)
|
|
Operating Weight (Since 2021)
|
44,138 lb |
|
Operating Weight*** (Since 2018)
|
46,268 lbs (20,987 kg)
|
|
Overall Height (Since 2016)
|
131 in (3,325 mm)
|
|
Overall Height (2017)
|
131 in (3,325 mm)
|
|
Overall Height (2018)
|
131 in (3,325 mm)
|
|
Overall Height (2019)
|
131 in (3,325 mm)
|
|
Overall Length (Since 2016)
|
271 in (6,880 mm)
|
|
Overall Length (2017)
|
271 in (6,880 mm)
|
|
Overall Length (2018)
|
271 in (6,880 mm)
|
|
Overall Length (2019)
|
271 in (6,880 mm)
|
|
Pocket Spacing (Since 2016)
|
35 in (896 mm)
|
|
Pocket Spacing (2017)
|
35 in (896 mm)
|
|
Pocket Spacing (2018)
|
35 in (896 mm)
|
|
Pocket Spacing (2019)
|
35 in (896 mm)
|
|
Pryout Force at Maximum Digging Depth (Since 2016)
|
33,946 lbf (151 kN)
|
|
Pryout Force at Maximum Digging Depth (2017)
|
33,946 lbf (151 kN)
|
|
Pryout Force at Maximum Digging Depth (2018)
|
33,946 lbf (151 kN)
|
|
Pryout Force at Maximum Digging Depth (2019)
|
33,946 lbf (151 kN)
|
|
Rated Bucket Capacity (Since 2021)
|
3 yd³ |
|
Rated Engine RPM (Since 2016)
|
1,800 rpm |
|
Rated Engine RPM (2017)
|
1,800 rpm |
|
Rated Engine RPM (2018)
|
1,800 rpm |
|
Rated Engine RPM (2019)
|
1,800 rpm |
|
Reach @ Full Lift and 45° Discharge (Since 2016)
|
51 in (1,298 mm)
|
|
Reach @ Full Lift and 45° Discharge (2017)
|
51 in (1,298 mm)
|
|
Reach @ Full Lift and 45° Discharge (2018)
|
51 in (1,298 mm)
|
|
Reach @ Full Lift and 45° Discharge (2019)
|
51 in (1,298 mm)
|
|
Reach at 2133 mm (7'0") Height (Since 2016)
|
63 in (1,598 mm)
|
|
Reach at 2133 mm (7'0") Height (2017)
|
63 in (1,598 mm)
|
|
Reach at 2133 mm (7'0") Height (2019)
|
63 in (1,598 mm)
|
|
Reach at 2133 mm (7'0") Height* (Since 2018)
|
63 in (1,598 mm)
|
|
Reach at 45° Discharge Angle 2133 mm (7'0") Clearance (Since 2016)
|
72 in (1,824 mm)
|
|
Reach at 45° Discharge Angle 2133 mm (7'0") Clearance (2017)
|
72 in (1,824 mm)
|
|
Reach at 45° Discharge Angle 2133 mm (7'0") Clearance (2018)
|
72 in (1,824 mm)
|
|
Reach at 45° Discharge Angle 2133 mm (7'0") Clearance (2019)
|
72 in (1,824 mm)
|
|
Ripper Beam Overall Width (Since 2016)
|
77 in (1,950 mm)
|
|
Ripper Beam Overall Width (2017)
|
77 in (1,950 mm)
|
|
Ripper Beam Overall Width (2018)
|
77 in (1,950 mm)
|
|
Ripper Beam Overall Width (2019)
|
77 in (1,950 mm)
|
|
Ripper Forces Penetration Force at Ground Level (Since 2016)
|
14,400 lbf (64 kN)
|
|
Ripper Forces Penetration Force at Ground Level (2017)
|
14,400 lbf (64 kN)
|
|
Ripper Forces Penetration Force at Ground Level (2019)
|
14,400 lbf (64 kN)
|
|
Ripper Forces* Penetration Force at Ground Level (Since 2018)
|
14,400 lbf (64 kN)
|
|
Ripper Shank Maximum Penetration Depth (Since 2016)
|
13 in (330 mm)
|
|
Ripper Shank Maximum Penetration Depth (2017)
|
13 in (330 mm)
|
|
Ripper Shank Maximum Penetration Depth (2018)
|
13 in (330 mm)
|
|
Ripper Shank Maximum Penetration Depth (2019)
|
13 in (330 mm)
|
|
Ripper-Scarifier Type (Since 2016)
|
Radial |
|
Ripper-Scarifier Type (2017)
|
Radial |
|
Ripper-Scarifier Type (2018)
|
Radial |
|
Ripper-Scarifier Type (2019)
|
Radial |
|
Rollback at Maximum Lift (Since 2016)
|
52 deg |
|
Rollback at Maximum Lift (2017)
|
52 deg |
|
Rollback at Maximum Lift (2018)
|
52 deg |
|
Rollback at Maximum Lift (2019)
|
52 deg |
|
Shank Gauge (Since 2016)
|
71 in (1,792 mm)
|
|
Shank Gauge (2017)
|
71 in (1,792 mm)
|
|
Shank Gauge (2018)
|
71 in (1,792 mm)
|
|
Shank Gauge (2019)
|
71 in (1,792 mm)
|
|
Static Tipping Load (Since 2016)
|
31,329 lbs (14,208 kg)
|
|
Static Tipping Load (2017)
|
31,329 lbs (14,208 kg)
|
|
Static Tipping Load (2018)
|
31,329 lbs (14,208 kg)
|
|
Static Tipping Load (2019)
|
31,329 lbs (14,208 kg)
|
|
Stroke (Since 2016)
|
5 in (135 mm)
|
|
Stroke (2017)
|
5 in (135 mm)
|
|
Stroke (2018)
|
5 in (135 mm)
|
|
Stroke (2019)
|
5 in (135 mm)
|
|
Tilt Back at Ground Level (Since 2017)
|
45 deg |
|
Tilt Back at Ground Level (2018)
|
45 deg |
|
Tilt Back at Ground Level (2019)
|
45 deg |
|
Track Clearance with Standard Shoe (Since 2016)
|
9 in (225 mm)
|
|
Track Clearance with Standard Shoe (2017)
|
9 in (225 mm)
|
|
Track Clearance with Standard Shoe (2018)
|
9 in (225 mm)
|
|
Track Clearance with Standard Shoe (2019)
|
9 in (225 mm)
|
|
Track Gauge (Since 2016)
|
73 in (1,850 mm)
|
|
Track Gauge (2017)
|
73 in (1,850 mm)
|
|
Track Gauge (2018)
|
73 in (1,850 mm)
|
|
Track Gauge (2019)
|
73 in (1,850 mm)
|
|
Track Rollers (Each Side) (Since 2016)
|
7 |
|
Track Rollers (Each Side) (2017)
|
7 |
|
Track Rollers (Each Side) (2018)
|
7 |
|
Track Rollers (Each Side) (2019)
|
7 |
|
Weight of Bucket with Teeth, Segments - and Additional Hydraulics (Since 2016)
|
4,930 lbs (2,236 kg)
|
|
Weight of Bucket with Teeth, Segments - and Additional Hydraulics (2017)
|
4,930 lbs (2,236 kg)
|
|
Weight of Bucket with Teeth, Segments - and Additional Hydraulics (2018)
|
4,930 lbs (2,236 kg)
|
|
Weight of Bucket with Teeth, Segments - and Additional Hydraulics (2019)
|
4,930 lbs (2,236 kg)
|
|
Width of Standard Track Shoe (Since 2016)
|
22 in (550 mm)
|
|
Width of Standard Track Shoe (2017)
|
22 in (550 mm)
|
|
Width of Standard Track Shoe (2018)
|
22 in (550 mm)
|
|
Width of Standard Track Shoe (2019)
|
22 in (550 mm)
|
|
Width without Bucket (optional track) Weight of General Purpose Bucket (Since 2016)
|
91 in (2,300 mm)
|
|
Width without Bucket (optional track) Weight of General Purpose Bucket (2017)
|
91 in (2,300 mm)
|
|
Width without Bucket (optional track) Weight of General Purpose Bucket (2018)
|
91 in (2,300 mm)
|
|
Width without Bucket (optional track) Weight of General Purpose Bucket (2019)
|
91 in (2,300 mm)
|
|
Width without Bucket (standard track) (Since 2016)
|
94 in (2,400 mm)
|
|
Width without Bucket (standard track) (2017)
|
94 in (2,400 mm)
|
|
Width without Bucket (standard track) (2018)
|
94 in (2,400 mm)
|
|
Width without Bucket (standard track) (2019)
|
94 in (2,400 mm)
|
|
Width without Bucket (with Standard Shoes) (Since 2016)
|
95 in (2,400 mm)
|
|
Width without Bucket (with Standard Shoes) (2017)
|
95 in (2,400 mm)
|
|
Width without Bucket (with Standard Shoes) (2018)
|
95 in (2,400 mm)
|
|
Width without Bucket (with Standard Shoes) (2019)
|
95 in (2,400 mm)
|
|
with Teeth & Segments (Since 2016)
|
4,114 lbs (1,866 kg)
|
|
with Teeth & Segments (2017)
|
4,114 lbs (1,866 kg)
|
|
with Teeth & Segments (2018)
|
4,114 lbs (1,866 kg)
|
|
with Teeth & Segments (2019)
|
4,114 lbs (1,866 kg)
|
| Operational |
|
Operating Weight |
44,138 lbs (20,021 kg)
|
| Service Refill Capacities |
|
Def Tank(1) |
4 gal (16 l)
|
|
Fuel Tank |
85 gal (320 l)
|
|
Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Undercarriage |
|
Ground Contact Area - Optional Shoe |
4013 in2 |
|
Ground Contact Area - Standard Shoe |
4900 in2 |
|
Ground Pressure - Optional Shoe |
11 psi |
|
Ground Pressure - Standard Shoe |
9 psi |
|
Ground Pressure(1) - Optional Shoe |
11 psi |
|
Ground Pressure(1) - Standard Shoe |
9 psi |
|
Grouser Height - Double Grouser |
2 in (4 cm)
|
|
Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
|
Track Gauge |
6 ft (2 m)
|
|
Track On Ground |
100 in (254 cm)
|
|
Track Rollers/Shoes - Each Side |
Jul-38 |
|
Track Shoe Width - Optional |
18 in (46 cm)
|
|
Track Shoe Width - Standard |
22 in (56 cm)
|
| Weights |
|
Note |
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
|
Operating Weight(1) |
44,771 lbs (20,308 kg)
|
