Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-11-18 Click here to place a bid
| Hours: | 13177 |
| Serial Number: | CAT0973CLLDX00240 |
| Machine Location: | FORT WORTH, TX |
Supplied by HeavyEquipmentData.com →
| Dimensions | |
| Clearance At Full Height And Dump | 11 ft (3 m) |
| Ground Clearance | 2 ft (0 m) |
| Height | 11 ft (3 m) |
| Height To Top Of Cab | 11 ft (4 m) |
| Length | 23 ft (7 m) |
| Length To Front Of Track | 17 ft (5 m) |
| Length With Bucket On Ground | 23 ft (7 m) |
| Reach At Dump Height | 4 ft (1 m) |
| Weight | 59,548 lbs (27,011 kg) |
| Width | 8 ft (3 m) |
| Width To Outside Of Tracks | 9 ft (3 m) |
| Engine | |
| Aspiration | Turbocharged |
| Displacement | 537 cu in (8,800 cu cm) |
| Engine Make | 2,236 |
| Engine Model | C9ACERT |
| Net Power | 242 hp (180 kw) |
| Number Of Cylinders | 6 |
| Power Measured @ | 1,800 rpm |
| General Specifications | |
| (optional track) Weight of General Purpose Bucket (Since 2001) | 108 in (3 m) |
| (optional track) Weight of General Purpose Bucket (Since 2010) | 109 in (2,755 mm) |
| 1st (Since 2001) | 0-9.0 0-5.6 |
| 1st (Since 2006) | 0-10 0-6.2 |
| 2133 mm (7'0") Clearance (Since 2013) | 70 in (1,784 mm) |
| 2nd (Since 2001) | Infinitely |
| 3rd (Since 2001) | Variable |
| 45° Discharge (Since 2013) | 49 in (1,237 mm) |
| A Forward Dump Clearance (Since 2001) | 117 in (3 m) |
| A Forward Dump Clearance (Since 2006) | 111 in (2,830 mm) |
| A Height to Top of Seat (Since 2001) | 106 in (3 m) |
| A Height to Top of Seat (Since 2006) | 117 in (2,970 mm) |
| and Additional Hydraulics (Since 2001) | 6,992 lbs (3,171 kg) |
| Approx. Operating Weight (Since 1999) | 59,548 lbs (27,006 kg) |
| B Bottom Dump Clearance (Since 2001) | 144 in (4 m) |
| B Bottom Dump Clearance (Since 2006) | 144 in (3,660 mm) |
| B Height to Top of Stack (Since 2001) | 113 in (3 m) |
| B Height to Top of Stack (Since 2006) | 118 in (2,989 mm) |
| Bore (Since 2001) | 5 in (121 mm) |
| Bore (Since 2006) | 4 in (112 mm) |
| Bottom Dump Reach (Since 2001) | 28 in (721 mm) |
| Bottom Dump Reach (Since 2006) | 27 in (693 mm) |
| Breakout Force (Since 2013) | 45,760 lbf (203 kN) |
| Bucket (with Standard Track) (Since 2013) | 102 in (2,580 mm) |
| Bucket (with Wide Track) (Since 2013) | 116 in (2,930 mm) |
| Bucket Width (Since 2013) | 107 in (2,716 mm) |
| C Height to Top of ROPS (Since 2001) | 136 in (3 m) |
| C Height to Top of ROPS (Since 2006) | 138 in (3,500 mm) |
| C Hinge Pin Height (Since 2001) | 166 in (4 m) |
| C Hinge Pin Height (Since 2006) | 167 in (4,240 mm) |
| Closure Force, Clamp to Cutting Edge (Since 2006) | 20,000 lbf (89 kN) |
| Closure Force, Clamp to Cutting Edge Weight of Bucket with Teeth, Segments (Since 2001) | 20,000 lbf (89 kN) |
| D Hinge Pin Height at Carry Position (Since 2001) | 19 in (492 mm) |
| D Hinge Pin Height at Carry Position (Since 2006) | 20 in (505 mm) |
| D Overall Height (Since 2001) | 257 in (7 m) |
| D Overall Height (Since 2006) | 228 in (5,800 mm) |
| Digging Depth (Since 2013) | 5 in (118 mm) |
| Dimensions Width (Since 1999) | 102 in (3 m) |
| Displacement (Since 2006) | 537 cu in (9 L) |
| Engine Displacement (Since 2001) | 638 cu in (11 L) |
| Engine Displacement (Since 2010) | 537 cu in (9 L) |
| Engine Model (Since 2001) | 3306 T |
| Engine Model (Since 2006) | C9 |
| Engine Model (Since 2010) | C9 ACERT |
| Equipped With Wide Track Shoe - (Specs that differ from above) (Since 2001) | 973C |
| Equipped With Wide Track Shoe - Ground Contact Area (Since 2001) | 6,104 sq in (4 sq m) |
| Equipped With Wide Track Shoe - Ground Pressure (Since 2001) | 10 psi (66 kPa) |
| Equipped With Wide Track Shoe - Operating Weight (Since 2001) | 60,950 lbs (27,640 kg) |
| Equipped With Wide Track Shoe - Track Gauge (Since 2001) | 82 in (2 m) |
| Equipped With Wide Track Shoe - Width of Track Shoe (Since 2001) | 27 in (675 mm) |
| Equipped With Wide Track Shoe - Width Without Bucket (Since 2001) | 108 in (3 m) |
| F Forward Dump Reach (Since 2001) | 52 in (1,324 mm) |
| F Forward Dump Reach (Since 2006) | 55 in (1,403 mm) |
| F Rollback at Carry Height (Since 2001) | 50 deg |
| F Rollback at Carry Height (Since 2010) | 51 deg |
| Face of Shoes (Since 2013) | 18 in (457 mm) |
| Flywheel Horsepower (Since 1999) | 210 hp (157 kw) |
| Flywheel Horsepower (Since 2001) | 230 hp (172 kw) |
| Flywheel Power (Since 2001) | 210 hp (157 kW) |
| Flywheel Power (Since 2006) | 230 hp (172 kW) |
| Flywheel Power (Since 2010) | 239 hp (178 kW) |
| Fuel Tank Refill Capacity (Since 2001) | 110 US gal (415 L) |
| Fuel Tank Refill Capacity (Since 2006) | 113 US gal (430 L) |
| G Digging Depth (Since 2001) | 10 in (241 mm) |
| G Digging Depth (Since 2006) | 10 in (254 mm) |
| G Rollback at Ground Level (Since 2001) | 42 deg |
| Grading Angle (Bare Edge) (Since 2001) | 69 deg |
| Ground Clearance (Since 2001) | 18 in (456 mm) |
| Ground Clearance (Since 2006) | 18 in (457 mm) |
| Ground Contact Area (with Standard Shoes) (Since 2010) | 4,542 sq in (3 sq m) |
| Ground Contact Area - (with Standard Shoes) (Since 2006) | 4,542 sq in (3 sq m) |
| Ground Contact Area - (With Std. Shoe) (Since 2001) | 4,522 sq in (3 sq m) |
| Ground Pressure (Since 2001) | 13 psi (89 kPa) |
| Ground Pressure (Since 2006) | 13 psi (91 kPa) |
| H Bucket Opening (Since 2001) | 54 in (1,380 mm) |
| H Bucket Opening (Since 2006) | 54 in (1,380 mm) |
| Height (Since 1999) | 138 in (4 m) |
| Height (Since 2006) | 6 in (165 mm) |
| Height (Since 2010) | 9 in (216 mm) |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Dump (Since 2001) | 2 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Dump (Since 2006) | 2 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Lower (Empty, Float Down) (Since 2001) | 3 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Lower (Empty, Float Down) (Since 2006) | 3 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Raise (Since 2001) | 6 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Raise (Since 2006) | 7 sec |
| Hydraulic Cycle Time, Bucket - Empty, in Seconds - Total (Since 2001) | 9 sec |
| Hydraulic Cycle Time, Bucket Empty, - in Seconds - Dump (Since 2010) | 2 sec |
| Hydraulic Cycle Time, Bucket Empty, - in Seconds - Lower (Empty, Float Down) (Since 2010) | 3 sec |
| Hydraulic Cycle Time, Bucket Empty, - in Seconds - Raise (Since 2010) | 7 sec |
| Hydraulic Cycle Time, Bucket Empty, - in Seconds - Total (Since 2010) | 11 sec |
| Hydraulic System Refill Capacity (Since 2001) | 42 US gal (159 L) |
| Hydraulic System Refill Capacity (Since 2006) | 16 US gal (60 L) |
| Hydraulic System Refill Capacity (Since 2010) | 16 US gal (62 L) |
| Installed Weights - Each Additional Shank (Since 2006) | 3 shanks std. |
| Installed Weights - Ripper with Standard Shank (1 shank) (Since 2010) | 2,636 lbs (1,196 kg) |
| Installed Weights - Ripper with Standard Shanks (Since 2006) | 2,636 lbs (1,196 kg) |
| Length (Since 1999) | 290 in (7 m) |
| Length (Since 2006) | 10 in (254 mm) |
| Length (Since 2010) | 10 in (254 mm) |
| Length of Track on Ground (Since 2001) | 115 in (3 m) |
| Length of Track on Ground (Since 2006) | 115 in (2,930 mm) |
| Maximum ground - clearance under tip (shank pinned in bottom hole) (Since 2001) | 26 in (670 mm) |
| Maximum Ground Clearance - under Tip (shank pinned in bottom hole) (Since 2006) | 26 in (670 mm) |
| Maximum Ground Clearance under Tip - (shank pinned in bottom hole) (Since 2010) | 27 in (688 mm) |
| Maximum ramp angle, - ripper up (shank pinned in bottom hole) (Since 2001) | 20 deg |
| Maximum Ramp Angle, Ripper Up - (shank pinned in bottom hole) (Since 2006) | 20 deg |
| Maximum reach at - ground line (Since 2001) | 51 in (1,295 mm) |
| Maximum Reach at Ground Line (Since 2006) | 51 in (1,295 mm) |
| Maximum Reach at Ground Line - (from track to teeth on ground) (Since 2010) | 70 in (1,770 mm) |
| No. Cylinders (Since 2001) | 6 |
| Number of Pockets (Since 2001) | 3 |
| Operating Weight (Since 2001) | 59,550 lbs (27,000 kg) |
| Operating Weight (Since 2006) | 58,941 lbs (26,731 kg) |
| Operating Weight (Since 2010) | 26 373 kg 58,142 Ib |
| Operating Weight (Since 2013) | 65,180 lbs (29,560 kg) |
| Overall Height (Since 2013) | 138 in (3,500 mm) |
| Overall Length (Since 2013) | 299 in (7,600 mm) |
| Pocket Spacing (Since 2001) | 39 in (1,000 mm) |
| Pocket Spacing (Since 2006) | 39 in (1,000 mm) |
| Product Identification Prefix (Since 1999) | 3RZ |
| Product Identification Prefix (Since 2001) | BCP |
| Pryout Force (Since 2006) | 38,470 lbf (17,450 kgf) |
| Pryout Force at Maximum Digging Depth (Since 2010) | 39,375 lbf (175 kN) |
| Rated Capacity (Since 1999) | 4 cu yd (3 cu m) |
| Rated Engine RPM (Since 2001) | 2,200 rpm |
| Rated Engine RPM (Since 2006) | 2,000 rpm |
| Reach at 2133 mm (7'0") Height (Since 2001) | 73 in (1,860 mm) |
| Reach at 2133 mm (7'0") Height (Since 2006) | 76 in (1,936 mm) |
| Ripper Beam Overall width (Since 2001) | 87 in (2 m) |
| Ripper Beam Overall Width (Since 2006) | 87 in (2,200 mm) |
| Ripper Forces Penetration Force (Since 2006) | 19,444 lbf (8,820 kgf) |
| Ripper Forces Penetration Force at Ground Level (Since 2010) | 19,125 lbf (85 kN) |
| Ripper Shank Maximum penetration depth (Since 2001) | 17 in (428 mm) |
| Ripper Shank Maximum Penetration Depth (Since 2006) | 17 in (428 mm) |
| Ripper Shank Maximum Penetration Depth (Since 2010) | 15 in (377 mm) |
| Ripper-Scarifier Type (Since 2001) | Radial |
| Rollback at Maximum Lift (Since 2001) | 59 deg |
| Rollback at Maximum Lift (Since 2010) | 58 deg |
| Shank Gauge (Since 2001) | 79 in (2 m) |
| Shank Gauge (Since 2006) | 79 in (2,000 mm) |
| Speeds Forward/Reverse (Since 2006) | km/h mph |
| Speeds Forward/Reverse - 1st (Since 2012) | 0 - 6 mph |
| Speeds Forward/Reverse - 2nd (Since 2012) | Infinitely |
| Speeds Forward/Reverse - 3rd (Since 2012) | Variable |
| Static Tipping Load (Since 2013) | 40,720 lbs (18,470 kg) |
| Stroke (Since 2001) | 6 in (152 mm) |
| Stroke (Since 2006) | 6 in (149 mm) |
| Tilt Back at Ground Level (Since 2001) | 45 deg |
| Track Gauge (Since 2001) | 82 in (2 m) |
| Track Gauge (Since 2006) | 82 in (2,080 mm) |
| Track Rollers (Each Side) (Since 2001) | 7 |
| w/Teeth & Segments (Since 2001) | 4,580 lbs (2,077 kg) |
| Weight of Bucket with Teeth, Segments - and Additional Hydraulics (Since 2010) | 7,850 lbs (3,560 kg) |
| Weight of Bucket with Teeth, Segments and Additional Hydraulics (Since 2006) | 7,052 lbs (3,198 kg) |
| Width of Standard Track Shoe (Since 2001) | 20 in (500 mm) |
| Width of Standard Track Shoe (Since 2006) | 20 in (500 mm) |
| Width Without Bucket (Since 2001) | 102 in (3 m) |
| Width without Bucket (optional track) (Since 2006) | 115 in (2,930 mm) |
| Width without Bucket (optional track) Weight of General Purpose Bucket (Since 2013) | 109 in (2,755 mm) |
| Width without Bucket (standard track) (Since 2006) | 102 in (2,580 mm) |
| Width Without Bucket (std. track) (Since 2001) | 102 in (3 m) |
| Width without Bucket (with Standard Shoes) (Since 2010) | 102 in (2,580 mm) |
| Width without Bucket - (with Standard Shoes) (Since 2006) | 102 in (2,580 mm) |
| with Teeth & Segments (Since 2006) | 4,638 lbs (2,103 kg) |
| with Teeth & Segments (Since 2010) | 4,814 lbs (2,183 kg) |
| Hydraulic | |
| Dump Time | 5 sec |
| Lower Time | 3 sec |
| Pump Flow Capacity | 89 gpm (335 lpm) |
| Pump Type | Hydrostatic drive/piston |
| Raise Time | 7 sec |
| Relief Valve Pressure | 2,755 psi |
| Operational | |
| Alternator Supplied Amperage | 65 amps |
| Breakout Force - Std Bucket | 47,992 lbs (21,769 kg) |
| Bucket Capacity - Heaped | 4 cu yd |
| Bucket Capacity - Struck | 3 cu yd |
| Cooling System Fluid Capacity | 11 gal (42 l) |
| Engine Oil Capacity | 8 gal (29 l) |
| Final Drive Fluid Capacity - Each | 8 gal (28 l) |
| Fuel Capacity | 113 gal (428 l) |
| Hydraulic System Fluid Capacity | 45 gal (169 l) |
| Max Speed | 6 mph (9 kph) |
| Operating Voltage | 24 V |
| Operating Weight | 58,153 lbs (26,378 kg) |
| Static Tipping Load | 44,649 lbs (20,252 kg) |
| Undercarriage | |
| Ground Contact Area | 4542 in2 |
| Ground Pressure | 13 psi |
| Length Of Track On Ground | 10 ft (3 m) |
| Number Of Shoes Per Side | 40 |
| Number Of Track Rollers Per Side | 7 |
| Track Gauge | 82 in (208 cm) |
| Track Shoe Width | 20 in (50 cm) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon