2016 Caterpillar 160M For Sale in Concord, ON
For Sale: $172,200.00 USD
Apply for Financing
Machine Info:
Description:
Air Conditioner, Air Suspension Seat, Arrangement, Snow, Auto Shift, Beacon, Blade Extension, Circle Clutch, Fenders, Guard, Transmission, Hydraulic Valves, Lighting, Mirrors, Moldboard Size - 14', Radio - AM FM Radio, Snow Wing, Tire Size, VHP Plus
Machine Details:
From the manufacturer:
Supplied by HeavyEquipmentData.com →
The Caterpillar 160M is a motor grader designed for road construction, maintenance, and site preparation. It is part of Caterpillar's M Series grader line and is used for grading, ditching, shaping, and finishing surfaces on highways, municipal roads, and construction sites. The 160M typically features a front-mounted blade, articulated frame, and operator cab with controls for precise moldboard adjustment. It is commonly equipped with a diesel engine, all-wheel drive options, and hydraulic systems for blade control. The Caterpillar 160M is used in earthmoving and grading applications where accurate surface leveling and material control are required.
| Blades |
|
Maximum Shoulder Reach Outside of Tires - Left |
82 in (208 cm)
|
|
Maximum Shoulder Reach Outside of Tires - Right |
90 in (229 cm)
|
|
Moldboard Sideshift - Left |
32 in (81 cm)
|
|
Moldboard Sideshift - Right |
37 in (94 cm)
|
| Circle |
|
Blade Tip Angle - Front |
40 degrees |
|
Blade Tip Angle - Rear |
5 degrees |
|
Diameter |
61 in (155 cm)
|
|
Max Lift Above Ground |
18 in (45 cm)
|
|
Max Reach Outside Tires - Left |
82 in (209 cm)
|
|
Max Reach Outside Tires - Right |
90 in (228 cm)
|
|
Shift Left |
27 in (70 cm)
|
|
Shift Right |
29 in (73 cm)
|
| Dimensions |
|
Blade Base |
9 ft (3 m)
|
|
Front Ground Clearance |
2 ft (1 m)
|
|
Height to Top of Isomount Cab |
11 ft (3 m)
|
|
Overall Length |
29 ft (9 m)
|
|
Rear Ground Clearance |
1 ft (0 m)
|
|
Tandem Axle Wheelbase |
5 ft (2 m)
|
|
Wheelbase |
20 ft (6 m)
|
|
Width Over Tires |
8 ft (3 m)
|
| Engine |
|
Base Power (1st Gear) - Net |
213 hp (159 kw)
|
|
Displacement |
537 cu in (8,800 cu cm)
|
|
Engine Model |
C9 ACERT VHP |
|
Max Power |
213 hp (159 kw)
|
|
Net Power Gears 7-8 |
213 hp (159 kw)
|
|
Net Torque Gears 7-8 |
912 lbs ft (1,237 nm)
|
|
Number of Cylinders |
6 |
|
Power Measured @ |
2,000 rpm |
|
Torque Measured @ |
2,000 rpm |
| Front Axle |
|
Ground Clearance |
2 ft (1 m)
|
|
Oscillation - Total |
32 degrees |
|
Wheel Lean |
18 degrees |
| Hydraulic System |
|
Pump Flow |
56 gpm (211 lpm)
|
|
Pump Type |
variable piston |
|
Relief Valve Pressure |
3,500 psi |
| Moldboard |
|
Blade Pull at Max Weight |
32,904 lbs (14,925 kg)
|
|
Max Depth of Cut |
30 in (75 cm)
|
|
Moldboard Height |
27 in (69 cm)
|
|
Moldboard Length |
14 ft (4 m)
|
|
Moldboard Thickness |
1 in (3 cm)
|
|
Moldboard Width |
14 ft (4 m)
|
|
Side Shift Left |
32 in (82 cm)
|
|
Side Shift Right |
37 in (95 cm)
|
| Operating Specifications |
|
Circle Gearbox Fluid Capacity |
2 gal (7 l)
|
|
Cooling System Fluid Capacity |
11 gal (40 l)
|
|
Fuel Capacity |
105 gal (397 l)
|
|
Hydraulic System Fluid Capacity |
17 gal (64 l)
|
|
Max Operation Weight - Front Axle |
18,478 lbs (8,381 kg)
|
|
Max Operation Weight - Rear Axle |
34,317 lbs (15,566 kg)
|
|
Max Operation Weight - Total |
52,795 lbs (23,947 kg)
|
|
Operating Weight |
35,060 lbs (15,903 kg)
|
|
Rear Diff/Final Drive Fluid Capacity |
17 gal (65 l)
|
|
Std Operation Weight - Front Axle |
9,677 lbs (4,389 kg)
|
|
Std Operation Weight - Rear Axle |
25,383 lbs (11,514 kg)
|
|
Std Operation Weight - Total |
35,060 lbs (15,903 kg)
|
|
Tandem Case Fluid Capacity (each) |
21 gal (80 l)
|
| Steering System |
|
Articulation Angle |
20 degrees |
|
Turning Radius |
25 ft (8 m)
|
| Transmission |
|
Max Speed - Forward |
30 mph (47 kph)
|
|
Max Speed - Reverse |
23 mph (38 kph)
|
|
Number of Gears - Forward |
8 |
|
Number of Gears - Reverse |
6 |
|
Transmission Type |
direct drive power shift countershaft |
