2015 Caterpillar 160M3 For Sale in Wibaux, MT

Name: 2015 Caterpillar 160M3
Brand: Caterpillar
SKU: 88866013
Price: 210000 USD
Availability: InStock

❮

❯

/ Save to Watch List

For Sale: $210,000.00 USD

Apply for Financing

Tractor and Equipment CAT

Tractor and Equipment CAT Dealer Info

Tractor and Equipment CAT Website

Click here to email Tractor and Equipment CAT.

Click for Phone Number

Machine Info:

Hours:	7389
Serial Number:	N9E00104
Machine Location:	WIBAUX, MT
More Information:	https://catused.com/cu/10052234

Description:

AS IS, AS EQUIPPED, Online Owner's Manual

Machine Details:

GENERAL CONDITION
Machine Starts and is Operable	Yes
Tires are Aired Up and Drivable	Yes
GENERAL APPEARANCE
Cleaning Required	Yes
SAFETY ITEMS
Back Up Alarm	Good
Horn	Good
ROPS	Good
OPERATOR STATION
Dash Console	Good
Gauges	Good
Switches	Fair
Windshield Wipers	Fair
ENGINE
Blow By	No
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Coolers	Good
Fan	Good
Radiator	Good
Water Pump	Good
ELECTRICAL, STARTING AND CHARGING SYSTEM
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM	Jumped machine several times- but electrical demand was stalling it out. Not able to fully test.
TRANSMISSION
Case - TRANSMISSION	Good
Controls - TRANSMISSION	Good
Cooler	Good
Lines / Fittings - TRANSMISSION	Good
Pump - TRANSMISSION	Good
Seals	Good
STEERING
Articulate P & B	Good
King Pins	Good
Steering Cylinder	Good
Steering Linkage	Good
Tie Rods / Rod Ends	Good
Wheel Lean Cylinder - STEERING	Good
BRAKE
Brake Linkage	Good
Control Valve	Good
Lines	Good
DRIVECHAIN / TANDEMS
Wheel Lugs & Rims	Good
HYDRAULICS
Circle Drive Box	Good
Circle Side Shift Cylinder	Good
Hydraulic Pump	Good
Lift Cylinders	Good
Linkage	Good
Side Shift Cylinder	Good
Tip Cylinder	Good
BLADE
Notes - BLADE	Normal minor wear on Base edge and CE. The Circle and mold board are well adjusted and work ready- see photos and video.
RIPPER
Frame	Good
Lines / Fittings - RIPPER	Good
TIRES
Average Life Remaining - TIRES	New = 35/32 and 50%= 17/32
Tire Size - TIRES	Michelin 17.5R25 Snow Plus radials- fronts average 22/32 and rears average 25/32
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1	Mold board operation video attached. Available for further inspection in Eastern Montana.
comment 2	Electrical fault would not allow for testing under load.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Caterpillar 160M3 is a motor grader designed for road construction, maintenance, and site preparation. It is part of Caterpillar's M Series grader lineup and is used for grading, ditching, shaping, and fine finishing work on highways, municipal roads, and large earthmoving projects. The 160M3 typically features a front-mounted engine, articulated frame, and moldboard control for precise blade positioning. It is commonly equipped with a diesel engine, powershift transmission, and hydraulic systems for blade and steering functions. The model is used by contractors, municipalities, and infrastructure operators requiring controlled grading performance and reliable operation in varied terrain and weather conditions.

Dimensions
Height	11 ft (3 m)
Length	29 ft (9 m)
Weight	45,547 lbs (20,660 kg)
Width	8 ft (2 m)
General Specifications
Base Power - Net (Since 2015)	221 hp (165 kw)
Base Power - Net (2016)	221 hp (165 kw)
Base Power - Net (2017)	221 hp (165 kw)
Base Power - Net (2018)	221 hp (165 kw)
Base Power - Net (2019)	221 hp (165 kw)
Diesel Exhaust Fluid Capacity (Since 2015)	6 US gal (22 L)
Diesel Exhaust Fluid Capacity (2016)	6 US gal (22 L)
Diesel Exhaust Fluid Capacity (2017)	6 US gal (22 L)
Diesel Exhaust Fluid Capacity (2018)	6 US gal (22 L)
Diesel Exhaust Fluid Capacity (2019)	6 US gal (22 L)
Displacement (Since 2015)	567 cu in (9,291 cu cm)
Displacement (2016)	567 cu in (9,291 cu cm)
Displacement (2017)	567 cu in (9,291 cu cm)
Displacement (2018)	567 cu in (9,291 cu cm)
Displacement (2019)	567 cu in (9,291 cu cm)
Electrical - Std. Alternator (Since 2015)	150
Electrical - Std. Alternator (2016)	150
Electrical - Std. Alternator (2017)	150
Electrical - Std. Alternator (2018)	150
Electrical - Std. Alternator (2019)	150
Electrical - Std. Battery CCA @ 0° F (Since 2015)	1,125
Electrical - Std. Battery CCA @ 0° F (2016)	1,125
Electrical - Std. Battery CCA @ 0° F (2017)	1,125
Electrical - Std. Battery CCA @ 0° F (2018)	1,125
Electrical - Std. Battery CCA @ 0° F (2019)	1,125
Electrical - System Size (Since 2015)	24V
Electrical - System Size (2016)	24V
Electrical - System Size (2017)	24V
Electrical - System Size (2018)	24V
Electrical - System Size (2019)	24V
Engine Model (Since 2015)	C9.3 ACERT
Engine Model (2016)	C9.3 ACERT
Engine Model (2017)	C9.3 ACERT
Engine Model (2018)	C9.3 ACERT
Engine Model (2019)	C9.3 ACERT
Front Axle/Steering - Articulation Angle (Since 2015)	20 deg
Front Axle/Steering - Articulation Angle (2016)	20 deg
Front Axle/Steering - Articulation Angle (2017)	20 deg
Front Axle/Steering - Articulation Angle (2018)	20 deg
Front Axle/Steering - Articulation Angle (2019)	20 deg
Front Axle/Steering - Minimum Turning Radius (Since 2015)	298 in (757 cm)
Front Axle/Steering - Minimum Turning Radius (2016)	298 in (757 cm)
Front Axle/Steering - Minimum Turning Radius (2017)	298 in (757 cm)
Front Axle/Steering - Minimum Turning Radius (2018)	298 in (757 cm)
Front Axle/Steering - Minimum Turning Radius (2019)	298 in (757 cm)
Front Axle/Steering - Oscillation Angle (Since 2015)	32 deg
Front Axle/Steering - Oscillation Angle (2016)	32 deg
Front Axle/Steering - Oscillation Angle (2017)	32 deg
Front Axle/Steering - Oscillation Angle (2018)	32 deg
Front Axle/Steering - Oscillation Angle (2019)	32 deg
Front Axle/Steering - Steering Angle (Since 2015)	48 deg
Front Axle/Steering - Steering Angle (2016)	48 deg
Front Axle/Steering - Steering Angle (2017)	48 deg
Front Axle/Steering - Steering Angle (2018)	48 deg
Front Axle/Steering - Steering Angle (2019)	48 deg
Front Axle/Steering - Wheel Lean Angle (Since 2015)	18 deg
Front Axle/Steering - Wheel Lean Angle (2016)	18 deg
Front Axle/Steering - Wheel Lean Angle (2017)	18 deg
Front Axle/Steering - Wheel Lean Angle (2018)	18 deg
Front Axle/Steering - Wheel Lean Angle (2019)	18 deg
Fuel Tank Capacity (Since 2015)	104 US gal (394 L)
Fuel Tank Capacity (2016)	104 US gal (394 L)
Fuel Tank Capacity (2017)	104 US gal (394 L)
Fuel Tank Capacity (2018)	104 US gal (394 L)
Fuel Tank Capacity (2019)	104 US gal (394 L)
GENERAL DIMENSIONS - Blade Base (Since 2015)	101 in (255 cm)
GENERAL DIMENSIONS - Blade Base (2016)	101 in (255 cm)
GENERAL DIMENSIONS - Blade Base (2017)	101 in (255 cm)
GENERAL DIMENSIONS - Blade Base (2018)	101 in (255 cm)
GENERAL DIMENSIONS - Blade Base (2019)	101 in (255 cm)
GENERAL DIMENSIONS - Height (to top of ROPS) (Since 2015)	130 in (331 cm)
GENERAL DIMENSIONS - Height (to top of ROPS) (2016)	130 in (331 cm)
GENERAL DIMENSIONS - Height (to top of ROPS) (2017)	130 in (331 cm)
GENERAL DIMENSIONS - Height (to top of ROPS) (2018)	130 in (331 cm)
GENERAL DIMENSIONS - Height (to top of ROPS) (2019)	130 in (331 cm)
GENERAL DIMENSIONS - Lift Above Ground (Since 2015)	19 in (48 cm)
GENERAL DIMENSIONS - Lift Above Ground (2016)	19 in (48 cm)
GENERAL DIMENSIONS - Lift Above Ground (2017)	19 in (48 cm)
GENERAL DIMENSIONS - Lift Above Ground (2018)	19 in (48 cm)
GENERAL DIMENSIONS - Lift Above Ground (2019)	19 in (48 cm)
GENERAL DIMENSIONS - Overall Length (Since 2015)	351 in (891 cm)
GENERAL DIMENSIONS - Overall Length (2016)	351 in (891 cm)
GENERAL DIMENSIONS - Overall Length (2017)	351 in (891 cm)
GENERAL DIMENSIONS - Overall Length (2018)	351 in (891 cm)
GENERAL DIMENSIONS - Overall Length (2019)	351 in (891 cm)
GENERAL DIMENSIONS - Overall Width - (at top of front tires) (Since 2015)	99 in (251 cm)
GENERAL DIMENSIONS - Overall Width - (at top of front tires) (2016)	99 in (251 cm)
GENERAL DIMENSIONS - Overall Width - (at top of front tires) (2017)	99 in (251 cm)
GENERAL DIMENSIONS - Overall Width - (at top of front tires) (2018)	99 in (251 cm)
GENERAL DIMENSIONS - Overall Width - (at top of front tires) (2019)	99 in (251 cm)
GENERAL DIMENSIONS - Standard Blade: Height (Since 2015)	24 in (61 cm)
GENERAL DIMENSIONS - Standard Blade: Height (2016)	24 in (61 cm)
GENERAL DIMENSIONS - Standard Blade: Height (2017)	24 in (61 cm)
GENERAL DIMENSIONS - Standard Blade: Height (2018)	24 in (61 cm)
GENERAL DIMENSIONS - Standard Blade: Height (2019)	24 in (61 cm)
GENERAL DIMENSIONS - Standard Blade: Length (Since 2015)	168 in (427 cm)
GENERAL DIMENSIONS - Standard Blade: Length (2016)	168 in (427 cm)
GENERAL DIMENSIONS - Standard Blade: Length (2017)	168 in (427 cm)
GENERAL DIMENSIONS - Standard Blade: Length (2018)	168 in (427 cm)
GENERAL DIMENSIONS - Standard Blade: Length (2019)	168 in (427 cm)
GENERAL DIMENSIONS - Standard Blade: Thickness (Since 2015)	1 in (2 cm)
GENERAL DIMENSIONS - Standard Blade: Thickness (2016)	1 in (2 cm)
GENERAL DIMENSIONS - Standard Blade: Thickness (2017)	1 in (2 cm)
GENERAL DIMENSIONS - Standard Blade: Thickness (2018)	1 in (2 cm)
GENERAL DIMENSIONS - Standard Blade: Thickness (2019)	1 in (2 cm)
GENERAL DIMENSIONS - Wheelbase (Since 2015)	241 in (612 cm)
GENERAL DIMENSIONS - Wheelbase (2016)	241 in (612 cm)
GENERAL DIMENSIONS - Wheelbase (2017)	241 in (612 cm)
GENERAL DIMENSIONS - Wheelbase (2018)	241 in (612 cm)
GENERAL DIMENSIONS - Wheelbase (2019)	241 in (612 cm)
GENERAL DIMENSIONS - With Ripper and Pushplate (Since 2015)	399 in (1,014 cm)
GENERAL DIMENSIONS - With Ripper and Pushplate (2016)	399 in (1,014 cm)
GENERAL DIMENSIONS - With Ripper and Pushplate (2017)	399 in (1,014 cm)
GENERAL DIMENSIONS - With Ripper and Pushplate (2018)	399 in (1,014 cm)
GENERAL DIMENSIONS - With Ripper and Pushplate (2019)	399 in (1,014 cm)
Hydraulics - Implement Pressure: Max. (Since 2015)	3,500 psi (24,150 kPa)
Hydraulics - Implement Pressure: Max. (2016)	3,500 psi (24,150 kPa)
Hydraulics - Implement Pressure: Max. (2017)	3,500 psi (24,150 kPa)
Hydraulics - Implement Pressure: Max. (2018)	3,500 psi (24,150 kPa)
Hydraulics - Implement Pressure: Max. (2019)	3,500 psi (24,150 kPa)
Hydraulics - Implement Pressure: Min. (Since 2015)	885 psi (6,100 kPa)
Hydraulics - Implement Pressure: Min. (2016)	885 psi (6,100 kPa)
Hydraulics - Implement Pressure: Min. (2017)	885 psi (6,100 kPa)
Hydraulics - Implement Pressure: Min. (2018)	885 psi (6,100 kPa)
Hydraulics - Implement Pressure: Min. (2019)	885 psi (6,100 kPa)
Hydraulics - Max. Pump Flow (Since 2015)	56 US gpm (210 L/min)
Hydraulics - Max. Pump Flow (2016)	56 US gpm (210 L/min)
Hydraulics - Max. Pump Flow (2017)	56 US gpm (210 L/min)
Hydraulics - Max. Pump Flow (2018)	56 US gpm (210 L/min)
Hydraulics - Max. Pump Flow (2019)	56 US gpm (210 L/min)
Hydraulics - Pump Type (Since 2015)	Variable Piston
Hydraulics - Pump Type (2016)	Variable Piston
Hydraulics - Pump Type (2017)	Variable Piston
Hydraulics - Pump Type (2018)	Variable Piston
Hydraulics - Pump Type (2019)	Variable Piston
Hydraulics - Tank Capacity (Since 2015)	17 US gal (64 L)
Hydraulics - Tank Capacity (2016)	17 US gal (64 L)
Hydraulics - Tank Capacity (2017)	17 US gal (64 L)
Hydraulics - Tank Capacity (2018)	17 US gal (64 L)
Hydraulics - Tank Capacity (2019)	17 US gal (64 L)
Interior Sound Level/SAE J919 (Since 2015)	71 dB(A
Interior Sound Level/SAE J919 (2016)	71 dB(A
Interior Sound Level/SAE J919 (2017)	71 dB(A
Interior Sound Level/SAE J919 (2018)	71 dB(A
Interior Sound Level/SAE J919 (2019)	71 dB(A
Max. Shoulder Reach: - Frame Straight - left (Since 2015)	82 in (209 cm)
Max. Shoulder Reach: - Frame Straight - Left (Since 2016)	82 in (209 cm)
Max. Shoulder Reach: - Frame Straight - Left (2017)	82 in (209 cm)
Max. Shoulder Reach: - Frame Straight - Left (2018)	82 in (209 cm)
Max. Shoulder Reach: - Frame Straight - Left (2019)	82 in (209 cm)
Max. Shoulder Reach: - Frame Straight - right (Since 2015)	90 in (228 cm)
Max. Shoulder Reach: - Frame Straight - Right (Since 2016)	90 in (228 cm)
Max. Shoulder Reach: - Frame Straight - Right (2017)	90 in (228 cm)
Max. Shoulder Reach: - Frame Straight - Right (2018)	90 in (228 cm)
Max. Shoulder Reach: - Frame Straight - Right (2019)	90 in (228 cm)
Max. Torque (Since 2015)	1,000 lb-ft (1,355 N-m)
Max. Torque (2016)	1,000 lb-ft (1,355 N-m)
Max. Torque (2017)	1,000 lb-ft (1,355 N-m)
Max. Torque (2018)	1,000 lb-ft (1,355 N-m)
Max. Torque (2019)	1,000 lb-ft (1,355 N-m)
No. Circle Support Shoes (Since 2015)	6
No. Circle Support Shoes (2016)	6
No. Circle Support Shoes (2017)	6
No. Circle Support Shoes (2018)	6
No. Circle Support Shoes (2019)	6
No. of Cylinders (Since 2015)	6
No. of Cylinders (2016)	6
No. of Cylinders (2017)	6
No. of Cylinders (2018)	6
No. of Cylinders (2019)	6
No. of Speeds Forward/Reverse (Since 2015)	8/6
No. of Speeds Forward/Reverse (2016)	8/6
No. of Speeds Forward/Reverse (2017)	8/6
No. of Speeds Forward/Reverse (2018)	8/6
No. of Speeds Forward/Reverse (2019)	8/6
Operating Weight (Typical) (Since 2015)	38,719 lbs (17,563 kg)
Operating Weight (Typical) (2016)	38,719 lbs (17,563 kg)
Operating Weight (Typical) (2017)	38,719 lbs (17,563 kg)
Operating Weight (Typical) (2018)	38,719 lbs (17,563 kg)
Operating Weight (Typical) (2019)	38,719 lbs (17,563 kg)
Rated Engine RPM (Since 2015)	2,000 rpm
Rated Engine RPM (2016)	2,000 rpm
Rated Engine RPM (2017)	2,000 rpm
Rated Engine RPM (2018)	2,000 rpm
Rated Engine RPM (2019)	2,000 rpm
Std. Tires - Front and Rear (Since 2015)	14.00R24 (G-2
Std. Tires - Front and Rear (2016)	14.00R24 (G-2
Std. Tires - Front and Rear (2017)	14.00R24 (G-2
Std. Tires - Front and Rear (2018)	14.00R24 (G-2
Std. Tires - Front and Rear (2019)	14.00R24 (G-2
Top Speed: Forward (Since 2015)	30 mph (47 kph)
Top Speed: Forward (2016)	30 mph (47 kph)
Top Speed: Forward (2017)	30 mph (47 kph)
Top Speed: Forward (2018)	30 mph (47 kph)
Top Speed: Forward (2019)	30 mph (47 kph)
Top Speed: Reverse (Since 2015)	23 mph (38 kph)
Top Speed: Reverse (2016)	23 mph (38 kph)
Top Speed: Reverse (2017)	23 mph (38 kph)
Top Speed: Reverse (2018)	23 mph (38 kph)
Top Speed: Reverse (2019)	23 mph (38 kph)
VHP Plus Range - Net (Since 2015)	221 - 272 hp (165 - 203 kw)
VHP Plus Range - Net (2016)	221 - 272 hp (165 - 203 kw)
VHP Plus Range - Net (2017)	221 - 272 hp (165 - 203 kw)
VHP Plus Range - Net (2018)	221 - 272 hp (165 - 203 kw)
VHP Plus Range - Net (2019)	221 - 272 hp (165 - 203 kw)