| Blade Range |
|
Blade Tip Range - Backward |
5 degrees |
|
Blade Tip Range - Forward |
40 degrees |
|
Circle Centershift - Left |
27 in (70 cm)
|
|
Circle Centershift - Right |
29 in (73 cm)
|
|
Maximum Blade Position Angle |
90 degrees |
|
Maximum Depth Of Cut |
30 in (75 cm)
|
|
Maximum Lift Above Ground |
18 in (45 cm)
|
|
Maximum Shoulder Reach Outside Of Tires - Left |
82 in (209 cm)
|
|
Maximum Shoulder Reach Outside Of Tires - Right |
90 in (228 cm)
|
|
Moldboard Sideshift - Left |
32 in (82 cm)
|
|
Moldboard Sideshift - Right |
37 in (95 cm)
|
| Dimensions |
|
Ground Clearance - Rear Axle |
13 in (34 cm)
|
|
Height - Exhaust Stack - Awd |
128 in (325 cm)
|
|
Height - Front Axle Center |
24 in (60 cm)
|
|
Height - Top Of Cab |
130 ft (40 m)
|
|
Height - Top Of Cab Product Link |
133 in (338 cm)
|
|
Height - Top Of Cylinders |
119 in (302 cm)
|
|
Length - Between Tandem Axles |
60 in (152 cm)
|
|
Length - Front Axle To Mid Tandem |
241 in (612 cm)
|
|
Length - Front Axle To Moldboard |
100 in (254 cm)
|
|
Length - Front Tire To Rear Of Machine |
344 in (874 cm)
|
|
Length - Push Plate To Ripper |
399 in (1,013 cm)
|
|
Length - Push Plate To Ripper Retracted |
386 in (980 cm)
|
|
Width - Outside Front Tires - Awd |
102 in (259 cm)
|
|
Width - Outside Rear Tires |
98 in (249 cm)
|
|
Width - Tire Center Lines Front - Awd |
87 in (221 cm)
|
| Engine |
|
Base Power (1st Gear) - Net |
213 hp (159 kw)
|
|
Base Power (1st Gear) - Net - Metric |
216 hp (161 kw)
|
|
Base Power (1st Gear, Awd Off) - Net |
213 hp (159 kw)
|
|
Bore |
4 in (11 cm)
|
|
Derating Altitude |
10,000 ft (3,048 m)
|
|
Displacement |
537 cu in (8,800 cu cm)
|
|
Emissions |
Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
|
Engine Model |
Cat C9 ACERT |
|
High - Ambient Capability |
122 degrees |
|
High Ambient - Fan Speed - Maximum |
1,650 rpm |
|
High Ambient - Fan Speed - Minimum |
600 rpm |
|
Maximum Torque - Awd On |
991 lbs ft (1,344 nm)
|
|
Note (1) |
Maximum torque (VHP Plus) measured at 1,000 rpm. |
|
Note (2) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
|
Note (3) |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. |
|
Note (4) |
Power as declared per ISO 14396; Rated Speed = 2,000 rpm; AWD = 201 kW (269 hp) |
|
Note (5) |
No engine derating required up to 3048 m (10,000 ft). |
|
Number Of Cylinders |
6 |
|
Speed At Rated Power |
2,000 rpm |
|
Stroke |
6 in (15 cm)
|
|
Torque Rise - Vhp Plus |
40% |
|
Vhp Plus Range - Net |
159-200 kW (213-268 hp) |
|
Vhp Plus Range - Net - Metric |
159-200 kW (216-272 hp) |
| Frame |
|
Circle - Blade Beam Thickness |
2 in (4 cm)
|
|
Circle - Diameter |
61 in (155 cm)
|
|
Circle - Height |
6 in (16 cm)
|
|
Drawbar - Height |
6 in (15 cm)
|
|
Drawbar - Width |
3 in (8 cm)
|
|
Front Axle - Height To Center |
23 in (57 cm)
|
|
Front Axle - Total Oscillation Per Side |
32 degrees |
|
Front Axle - Wheel Lean - Left/Right |
18 degrees |
|
Front Frame Structure - Height |
12 ft (4 m)
|
|
Front Frame Structure - Thickness |
1 ft (0 m)
|
|
Front Frame Structure - Width |
12 ft (4 m)
|
| Hydraulic System |
|
Circuit Type |
Electro-hydraulic load sensing, closed center |
|
Maximum System Pressure |
3,500 psi |
|
Note |
Pump output measured at 2,150 rpm. |
|
Pump Output |
56 gpm (211 lpm)
|
|
Pump Type |
Variable piston |
|
Standby Pressure |
450 psi |
| Moldboard |
|
Arc Radius |
16 in (41 cm)
|
|
Blade Pull - Base Gvw - Awd |
35,344 lbs (16,029 kg)
|
|
Blade Pull - Maximum Gvw - Awd |
47,515 lbs (21,549 kg)
|
|
Blade Width |
12 ft (4 m)
|
|
Cutting Edge Thickness |
1 in (2 cm)
|
|
Cutting Edge Width |
6 in (15 cm)
|
|
Down Pressure - Base Gvw - Awd |
18,868 lbs (8,557 kg)
|
|
Down Pressure - Maximum Gvw - Awd |
28,998 lbs (13,151 kg)
|
|
End Bit - Thickness |
1 in (2 cm)
|
|
End Bit - Width |
6 in (15 cm)
|
|
Moldboard - Height |
24 in (61 cm)
|
|
Moldboard - Thickness |
1 in (2 cm)
|
|
Moldboard - Width |
12 ft (4 m)
|
|
Note |
Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW). |
|
Throat Clearance |
4 in (9 cm)
|
| Net Power - Awd Off |
|
Gear - Forward 1st |
213 hp (159 kw)
|
|
Gear - Forward 2nd |
218 hp (163 kw)
|
|
Gear - Forward 3rd |
223 hp (166 kw)
|
|
Gear - Forward 4th |
228 hp (170 kw)
|
|
Gear - Forward 5th |
233 hp (174 kw)
|
|
Gear - Forward 6th |
238 hp (177 kw)
|
|
Gear - Forward 7th |
243 hp (181 kw)
|
|
Gear - Forward 8th |
248 hp (185 kw)
|
|
Gear - Reverse 1st |
213 hp (159 kw)
|
|
Gear - Reverse 2nd |
218 hp (163 kw)
|
|
Gear - Reverse 3rd-6th |
223 hp (166 kw)
|
| Net Power - Awd On |
|
Gear - Forward 1st |
223 hp (166 kw)
|
|
Gear - Forward 2nd |
238 hp (177 kw)
|
|
Gear - Forward 3rd |
243 hp (181 kw)
|
|
Gear - Forward 4th |
248 hp (185 kw)
|
|
Gear - Forward 5th |
268 hp (200 kw)
|
|
Gear - Forward 6th |
268 hp (200 kw)
|
|
Gear - Forward 7th |
268 hp (200 kw)
|
|
Gear - Forward 8th |
268 hp (200 kw)
|
|
Gear - Reverse 1st |
213 hp (159 kw)
|
|
Gear - Reverse 2nd |
218 hp (163 kw)
|
|
Gear - Reverse 3rd-6th |
223 hp (166 kw)
|
| Net Power - Vhp Plus |
|
Gear - Forward 1st |
213 hp (159 kw)
|
|
Gear - Forward 2nd |
218 hp (163 kw)
|
|
Gear - Forward 3rd |
223 hp (166 kw)
|
|
Gear - Forward 4th |
228 hp (170 kw)
|
|
Gear - Forward 5th |
233 hp (174 kw)
|
|
Gear - Forward 6th |
238 hp (177 kw)
|
|
Gear - Forward 7th |
243 hp (181 kw)
|
|
Gear - Forward 8th |
248 hp (185 kw)
|
|
Gear - Reverse 1st |
213 hp (159 kw)
|
|
Gear - Reverse 2nd |
218 hp (163 kw)
|
|
Gear - Reverse 3rd-6th |
223 hp (166 kw)
|
| Operating Specifications |
|
Articulation Angle - Left/Right |
20 degrees |
|
Forward - 1st |
3 mph (4 kph)
|
|
Forward - 2nd |
4 mph (6 kph)
|
|
Forward - 3rd |
5 mph (8 kph)
|
|
Forward - 4th |
7 mph (11 kph)
|
|
Forward - 5th |
11 mph (17 kph)
|
|
Forward - 6th |
15 mph (24 kph)
|
|
Forward - 7th |
20 mph (33 kph)
|
|
Forward - 8th |
30 mph (47 kph)
|
|
Reverse - 1st |
2 mph (3 kph)
|
|
Reverse - 2nd |
4 mph (6 kph)
|
|
Reverse - 3rd |
6 mph (9 kph)
|
|
Reverse - 4th |
9 mph (14 kph)
|
|
Reverse - 5th |
16 mph (26 kph)
|
|
Reverse - 6th |
23 mph (38 kph)
|
|
Steering Range - Left/Right |
48 degrees |
|
Top Speed - Forward |
30 mph (47 kph)
|
|
Top Speed - Reverse |
23 mph (38 kph)
|
|
Turning Radius - Outside Front Tires |
25 ft (8 m)
|
| Power Train |
|
Brakes - Parking |
Multiple oil disc |
|
Brakes - Secondary |
Dual circuit control system |
|
Brakes - Service |
Multiple oil disc |
|
Brakes - Service - Surface Area |
3565 in2 |
|
Forward/Reverse Gears |
8 Forward/6 Reverse |
|
Transmission |
Direct drive, power shift, countershaft |
| Ripper |
|
Machine Length Increase, Beam Raised |
39 in (100 cm)
|
|
Penetration Force |
20,540 lbs (9,315 kg)
|
|
Pry-Out Force |
26,259 lbs (11,909 kg)
|
|
Ripper Shank Holder Spacing |
21 in (53 cm)
|
|
Ripper Shank Holders |
5 |
|
Ripping Depth - Maximum |
17 in (43 cm)
|
| Scarifier |
|
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing |
5 in (12 cm)
|
|
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders |
5, 11 |
|
Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum |
18 in (47 cm)
|
|
Front, V-Type, 5 Or 11 Tooth - Working Width |
47 in (120 cm)
|
|
Mid, V-Type - Scarifier Shank Holder Spacing |
5 in (12 cm)
|
|
Mid, V-Type - Scarifier Shank Holders |
11 |
|
Mid, V-Type - Scarifying Depth, Maximum |
12 in (29 cm)
|
|
Mid, V-Type - Working Width |
47 in (118 cm)
|
|
Rear - Scarifier Shank Holder Spacing |
11 in (27 cm)
|
|
Rear - Scarifier Shank Holders |
9 |
|
Rear - Scarifying Depth, Maximum |
11 in (27 cm)
|
|
Rear - Working Width |
91 in (231 cm)
|
| Service Refill |
|
Circle Drive Housing |
2 gal (7 l)
|
|
Cooling System |
11 gal (40 l)
|
|
Engine Oil |
8 gal (30 l)
|
|
Front Wheel Spindle Bearing Housing |
0 gal (1 l)
|
|
Fuel Capacity |
110 gal (416 l)
|
|
Hydraulic System - Tank |
17 gal (64 l)
|
|
Tandem Housing - Each |
21 gal (80 l)
|
|
Transmission - Differential - Final Drives |
17 gal (65 l)
|
| Standards |
|
Brakes |
ISO 3450:1996 |
|
Note (1) |
The static operator sound pressure level is 73 dB(A) when ISO 6394:2008 is used to measure the value for an enclosed cab. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
|
Note (2) |
The dynamic spectator sound pressure level is 107 dB(A) when ISO 6395:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. |
|
Rops/Fops |
ISO 3471:2008, ISO 3449:2005 Level II |
|
Sound |
ISO 6394:2008, ISO 6395:2008 |
|
Steering |
ISO 5010:2007 |
| Tandems |
|
Drive Chain Pitch |
2 in (5 cm)
|
|
Height |
23 in (57 cm)
|
|
Sidewall Thickness - Inner |
1 in (3 cm)
|
|
Sidewall Thickness - Outer |
1 in (2 cm)
|
|
Tandem Oscillation - Front Down |
25 degrees |
|
Tandem Oscillation - Front Up |
15 degrees |
|
Wheel Axle Spacing |
60 in (152 cm)
|
|
Width |
8 in (20 cm)
|
| Weights |
|
Gross Vehicle Weight - Typically Equipped |
45,432 lbs (20,604 kg)
|
|
Note |
Base operating weight on standard machine configuration is calculated with full fuel tank, coolant, lubricants, operator and 14.0R24 tires with multi-piece (MP) rims. |
|
Operating Weight - Typically Equipped |
45,432 lbs (20,604 kg)
|
| Weights - Awd |
|
Gross Vehicle Weight - Base - Front Axle |
10,992 lbs (4,985 kg)
|
|
Gross Vehicle Weight - Base - Rear Axle |
28,278 lbs (12,824 kg)
|
|
Gross Vehicle Weight - Base - Total |
39,270 lbs (17,810 kg)
|
|
Gross Vehicle Weight - Maximum - Front Axle |
16,894 lbs (7,662 kg)
|
|
Gross Vehicle Weight - Maximum - Rear Axle |
35,900 lbs (16,281 kg)
|
|
Gross Vehicle Weight - Maximum - Total |
52,794 lbs (23,943 kg)
|
|
Gross Vehicle Weight - Typically Equipped - Front Axle |
13,455 lbs (6,102 kg)
|
|
Gross Vehicle Weight - Typically Equipped - Rear Axle |
31,976 lbs (14,502 kg)
|
|
Gross Vehicle Weight - Typically Equipped - Total |
45,431 lbs (20,604 kg)
|
