| Body Capacities |
|
Heaped (Sae 2:1) |
23 cu yd |
|
Struck |
17 cu yd |
|
Tailgate Heaped Sae 2:1 |
25 cu yd |
|
Tailgate Struck |
18 cu yd |
| Body Hoist |
|
Lower Time |
8 s |
|
Raise Time |
12 s |
| Body Plate |
|
Body Plate Type |
High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
|
Base |
1 in (2 cm)
|
|
Base Plate |
1 in (2 cm)
|
|
Front |
0 in (1 cm)
|
|
Front Plate |
0 in (1 cm)
|
|
Scow |
1 in (2 cm)
|
|
Side |
1 in (1 cm)
|
|
Side Plates |
1 in (1 cm)
|
| Dimensions |
|
Dump Ground Clearance |
2 ft (1 m)
|
|
Dump Height |
21 ft (7 m)
|
|
Ground Clearance |
2 ft (1 m)
|
|
Height |
11 ft (3 m)
|
|
Length |
32 ft (10 m)
|
|
Overall Height |
11 ft (3 m)
|
|
Overall Length |
33 ft (10 m)
|
|
Overall Width |
9 ft (3 m)
|
|
Weight |
50,500 lbs (22,906 kg)
|
|
Wheelbase |
15 ft (5 m)
|
|
Width |
9 ft (3 m)
|
| Dump |
|
Capacity - Heaped |
22 cu yd |
|
Capacity - Struck |
17 cu yd |
|
Lower Time |
12 sec |
|
Raise Time |
12 sec |
|
Rated Payload |
61,950 lbs (28,095 kg)
|
| Engine |
|
Aspiration |
Turbochaarged |
|
Bore |
5 in (13 cm)
|
|
Displacement |
763 cu in (12,500 cu cm)
|
|
Emissions |
The 730 meets Tier 4 Final/Stage IV emission standards. |
|
Engine Make |
2,236 |
|
Engine Model |
C11 with ACERT Technology |
|
Engine Model |
Cat C13 ACERT |
|
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv |
Cat C13 ACERT |
|
Gross Power |
329 hp (245 kw)
|
|
Gross Power - Sae J1995 |
375 hp (280 kw)
|
|
Net Power |
325 hp (242 kw)
|
|
Net Power - Eec 80/1269 |
321 hp (239 kw)
|
|
Net Power - Iso 14396 |
370 hp (276 kw)
|
|
Net Power - Iso 9249 |
321 hp (239 kw)
|
|
Net Power - Sae J1349 |
367 hp (274 kw)
|
|
No Engine De-Rating Below |
12,500 ft (3,810 m)
|
|
Note (1) |
The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. |
|
Note (2) |
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
|
Note (3) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
|
Note (4) |
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
|
Note (5) |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
|
Number Of Cylinders |
6 |
|
Peak Engine Torque Gross (Sae J1995) |
1,579 lbs ft (2,141 nm)
|
|
Peak Engine Torque Net (Sae J1349) |
1,564 lbs ft (2,120 nm)
|
|
Peak Engine Torque Speed |
1,200 rpm |
|
Stroke |
6 in (16 cm)
|
| General Specifications |
|
Articulated/Rigid (Since 2018)
|
A |
|
Articulated/Rigid (2019)
|
A |
|
Articulated/Rigid (2020)
|
A |
|
Articulated/Rigid (2021)
|
A |
|
Articulated/Rigid (2022)
|
A |
|
Articulated/Rigid (2023)
|
A |
|
Articulated/Rigid (Since 2024)
|
Articulated |
|
Drive Configuration (Since 2018)
|
6WD |
|
Drive Configuration (2019)
|
6WD |
|
Drive Configuration (2020)
|
6WD |
|
Drive Configuration (2021)
|
6WD |
|
Drive Configuration (2022)
|
6WD |
|
Drive Configuration (2023)
|
6WD |
|
Drive Configuration (2024)
|
6WD |
|
Engine Type (Since 2018)
|
Cat C13 ACERT |
|
Engine Type (2019)
|
Cat C13 ACERT |
|
Engine Type (2020)
|
Cat C13 ACERT |
|
Engine Type (2021)
|
Cat C13 ACERT |
|
Engine Type (Since 2022)
|
Cat C13 |
|
Engine Type (2023)
|
Cat C13 |
|
Engine Type (2024)
|
Cat C13 |
|
Mfg. Model (Since 2018)
|
730 |
|
Mfg. Model (2019)
|
730 |
|
Mfg. Model (2020)
|
730 |
|
Mfg. Model (2021)
|
730 |
|
Mfg. Model (2022)
|
730 |
|
Mfg. Model (2023)
|
730 |
|
Mfg. Model (2024)
|
730 |
|
Operating Weight (Since 2018)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2019)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2020)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2021)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2022)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2023)
|
52,690 lbs (23,896 kg)
|
|
Operating Weight (2024)
|
52,690 lbs (23,896 kg)
|
|
Planetary Powershift Transmission (Since 2018)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2019)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2020)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2021)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2022)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2023)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2024)
|
Powershift w/ lockup torque converter |
|
Rated Payload (Since 2018)
|
31 t (31,000 kg)
|
|
Rated Payload (2019)
|
31 t (31,000 kg)
|
|
Rated Payload (2020)
|
31 t (31,000 kg)
|
|
Rated Payload (2021)
|
31 t (31,000 kg)
|
|
Rated Payload (2022)
|
31 t (31,000 kg)
|
|
Rated Payload (2023)
|
31 t (31,000 kg)
|
|
Rated Payload (2024)
|
31 t (31,000 kg)
|
| Operating Weights |
|
Center Axle - Empty |
10,053 lbs (4,559 kg)
|
|
Center Axle - Loaded |
37,302 lbs (16,917 kg)
|
|
Center Axle - Rated Load |
27,249 lbs (12,358 kg)
|
|
Front Axle - Empty |
33,069 lbs (14,997 kg)
|
|
Front Axle - Loaded |
40,300 lbs (18,277 kg)
|
|
Front Axle - Rated Load |
7,231 lbs (3,279 kg)
|
|
Rear Axle - Empty |
9,568 lbs (4,339 kg)
|
|
Rear Axle - Loaded |
36,817 lbs (16,697 kg)
|
|
Rear Axle - Rated Load |
27,249 lbs (12,358 kg)
|
|
Total - Empty |
52,690 lbs (23,896 kg)
|
|
Total - Loaded |
114,420 lbs (51,891 kg)
|
|
Total - Rated Load |
61,729 lbs (27,995 kg)
|
| Operational |
|
Cooling System Fluid Capacity |
23 gal (85 l)
|
|
Engine Oil Capacity |
10 gal (37 l)
|
|
Fuel Capacity |
95 gal (360 l)
|
|
Hydraulic System Fluid Capacity |
27 gal (102 l)
|
|
Tire Size |
23.5R25 |
|
Transmission Fluid Capacity |
10 gal (36 l)
|
| Optimal Loader/Truck Pass Matching |
|
Hydraulic Excavators: 336f/336f Xe - Passes |
56 |
|
Hydraulic Excavators: 349f/349f Xe - Passes |
45 |
|
Note |
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
|
Wheel Loader: 950m - Passes |
5 |
|
Wheel Loader: 962m - Passes |
45 |
|
Wheel Loaders: 966m/966m Xe - Passes |
4 |
|
Wheel Loaders: 972m/972m Xe - Passes |
34 |
| Service Refill Capacities |
|
Cooling System |
22 gal (83 l)
|
|
Def Tank |
5 gal (20 l)
|
|
Engine Crankcase |
10 gal (38 l)
|
|
Final Drives/Differential |
33 gal (125 l)
|
|
Fuel Tank |
109 gal (412 l)
|
|
Hydraulic System |
29 gal (110 l)
|
|
Output Transfer Gear Box |
6 gal (24 l)
|
|
Transmission |
12 gal (47 l)
|
| Sound Levels |
|
Interior Cab |
72 dB(A) |
|
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
|
Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Standards |
|
Brakes |
ISO 3450 2011 |
|
Cab - Fops |
ISO 3449 Level II 2005 |
|
Cab - Rops |
ISO 3471 2008 |
|
Steering |
ISO 5010 2007 |
| Steering |
|
Lock To Lock |
4.75 seconds @ 60 rpm |
| Transmission |
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 2 |
9 mph (14 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Forward - 4 |
21 mph (34 kph)
|
|
Forward - 5 |
29 mph (47 kph)
|
|
Forward - 6 |
34 mph (55 kph)
|
|
Max Speed |
34 mph (55 kph)
|
|
Number Of Forward Gears |
6 |
|
Number Of Reverse Gears |
1 |
|
Reverse - 1 |
6 mph (10 kph)
|
| Turning Circle |
|
Note |
Dimensions are for machines equipped with 23.5R25 tires. |
|
Turning Dimensions - Aisle Width |
210 in (533 cm)
|
|
Turning Dimensions - Clearance Radius |
318 in (808 cm)
|
|
Turning Dimensions - Inside Radius |
153 in (389 cm)
|
|
Turning Dimensions - Sae Turning Radius |
294 in (747 cm)
|
| Weights |
|
Center Axle - Empty |
11023.2 % |
|
Center Axle - Loaded |
39021.9 % |
|
Front Axle - Empty |
28,969 lbs (13,138 kg)
|
|
Front Axle - Loaded |
34965.4 % |
|
Rear Axle - Empty |
10,384 lbs (4,709 kg)
|
|
Rear Axle - Loaded |
38,383 lbs (17,407 kg)
|
|
Total Empty |
50,376 lbs (22,846 kg)
|
|
Total Loaded |
112,370 lbs (50,961 kg)
|
