| Body Capacities |
|
Heaped (Sae 2:1) |
23 cu yd |
|
Struck |
17 cu yd |
|
Tailgate Heaped Sae 2:1 |
25 cu yd |
|
Tailgate Struck |
18 cu yd |
| Body Hoist |
|
Lower Time |
8 s |
|
Raise Time |
12 s |
| Body Plate |
|
Body Plate Type |
High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
|
Base |
1 in (2 cm)
|
|
Chute |
1 in (2 cm)
|
|
Front |
0 in (1 cm)
|
|
Side |
1 in (1 cm)
|
| Dimensions |
|
Height |
11 ft (3 m)
|
|
Length |
35 ft (11 m)
|
|
Weight |
52,305 lbs (23,725 kg)
|
|
Width |
10 ft (3 m)
|
| Dump |
|
Rated Payload |
68,343 lbs (30,995 kg)
|
|
Rated Payload |
68,343 lbs (30,995 kg)
|
| Engine |
|
Bore |
5 in (13 cm)
|
|
Bore |
5 in (13 cm)
|
|
Displacement |
763 cu in (12,503 cu cm)
|
|
Displacement |
763 cu in (12,500 cu cm)
|
|
Emissions |
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
|
Engine Model |
Cat C13 |
|
Engine Model |
Cat C13 ACERT |
|
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv |
Cat C13 ACERT |
|
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv |
Cat C13 ACERT |
|
Gross Power - Sae J1995 |
375 hp (280 kw)
|
|
Gross Power - Sae J1995 |
375 hp (280 kw)
|
|
Net Power - Iso 14396 |
370 hp (276 kw)
|
|
Net Power - Iso 14396 |
370 hp (276 kw)
|
|
Net Power - Sae J1349 |
367 hp (274 kw)
|
|
Net Power - Sae J1349 |
367 hp (274 kw)
|
|
No Engine De-Rating Below |
12,500 ft (3,810 m)
|
|
No Engine De-Rating Required Below |
12,500 ft (3,810 m)
|
|
Note (1) |
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
|
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
|
Note (3) |
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
|
Note (4) |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
|
Peak Engine Torque Gross (Sae J1995) |
1,579 lbs ft (2,141 nm)
|
|
Peak Engine Torque Gross (Sae J1995) |
1,579 lbs ft (2,141 nm)
|
|
Peak Engine Torque Net (Iso 14396) |
1,564 lbs ft (2,120 nm)
|
|
Peak Engine Torque Net (Sae J1349) |
1,564 lbs ft (2,120 nm)
|
|
Peak Engine Torque Speed |
1,200 rpm |
|
Peak Engine Torque Speed |
1,200 rpm |
|
Stroke |
6 in (16 cm)
|
|
Stroke |
6 in (16 cm)
|
| Operating Weights |
|
Center Axle - Empty |
9,987 lbs (4,529 kg)
|
|
Center Axle - Loaded |
37,236 lbs (16,887 kg)
|
|
Center Axle - Rated Load |
27,249 lbs (12,358 kg)
|
|
Front Axle - Empty |
32,882 lbs (14,912 kg)
|
|
Front Axle - Loaded |
40,113 lbs (18,192 kg)
|
|
Front Axle - Rated Load |
7,231 lbs (3,279 kg)
|
|
Rear Axle - Empty |
9,436 lbs (4,279 kg)
|
|
Rear Axle - Loaded |
36,685 lbs (16,637 kg)
|
|
Rear Axle - Rated Load |
27,249 lbs (12,358 kg)
|
|
Total - Empty |
52,305 lbs (23,721 kg)
|
|
Total - Loaded |
114,034 lbs (51,716 kg)
|
|
Total - Rated Load |
61,729 lbs (27,995 kg)
|
| Service Refill Capacities |
|
Cooling System |
22 gal (83 l)
|
|
Cooling System |
22 gal (83 l)
|
|
Def Tank |
5 gal (20 l)
|
|
Def Tank (Iso 2224-1) |
5 gal (20 l)
|
|
Engine Crankcase |
11 gal (40 l)
|
|
Engine Crankcase |
10 gal (38 l)
|
|
Final Drives/Differential |
36 gal (135 l)
|
|
Final Drives/Differential |
33 gal (125 l)
|
|
Fuel Tank |
109 gal (412 l)
|
|
Fuel Tank |
109 gal (412 l)
|
|
Hydraulic System |
29 gal (110 l)
|
|
Hydraulic System |
29 gal (110 l)
|
|
Output Transfer Gear Box |
6 gal (24 l)
|
|
Output Transfer Gear Box |
6 gal (24 l)
|
|
Transmission |
9 gal (35 l)
|
|
Transmission |
12 gal (47 l)
|
| Sound Levels |
|
Interior Cab |
76 dB(A) |
|
Interior Cab |
76 dB(A) |
|
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
|
Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Standards |
|
Brakes |
ISO 3450 - 2011 |
|
Brakes |
ISO 3450 2011 |
|
Cab - Fops |
ISO 3449 Level II - 2005 |
|
Cab - Fops |
ISO 3449 Level II 2005 |
|
Cab - Rops |
ISO 3471 - 2008 |
|
Cab - Rops |
ISO 3471 2008 |
|
Steering |
ISO 5010 - 2007 |
|
Steering |
ISO 5010 2007 |
| Steering |
|
Lock To Lock |
4.75 seconds @ 60 rpm |
|
Lock To Lock |
4.75 seconds @ 60 rpm |
| Transmission |
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 2 |
9 mph (14 kph)
|
|
Forward - 2 |
9 mph (14 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Forward - 4 |
21 mph (34 kph)
|
|
Forward - 4 |
21 mph (34 kph)
|
|
Forward - 5 |
29 mph (47 kph)
|
|
Forward - 5 |
29 mph (47 kph)
|
|
Forward - 6 |
34 mph (55 kph)
|
|
Forward - 6 |
34 mph (55 kph)
|
|
Reverse - 1 |
6 mph (10 kph)
|
|
Reverse - 1 |
6 mph (10 kph)
|
| Turning Circle |
|
Note |
Dimensions are for machines equipped with 23.5R25 tires. |
|
Note |
Dimensions are for machines equipped with 23.5R25 tires. |
|
Turning Dimensions - Aisle Width |
210 in (533 cm)
|
|
Turning Dimensions - Aisle Width |
210 in (533 cm)
|
|
Turning Dimensions - Clearance Radius |
318 in (808 cm)
|
|
Turning Dimensions - Clearance Radius |
318 in (808 cm)
|
|
Turning Dimensions - Inside Radius |
153 in (389 cm)
|
|
Turning Dimensions - Inside Radius |
153 in (389 cm)
|
|
Turning Dimensions - Sae Turning Radius |
294 in (747 cm)
|
|
Turning Dimensions - Sae Turning Radius |
294 in (747 cm)
|
|
Turning Dimensions - Steer Angle - Left/Right |
45 degrees |
| Wheel Base Length |
|
Long Wheel Base |
215 in (547 cm)
|
|
Standard Wheel Base |
157 in (398 cm)
|
