Create a CEG Account  /  CEG Login
☰

2010 Caterpillar 775F For Sale in Australia, Aus

2010 Caterpillar 775F
2010 Caterpillar 775F
2010 Caterpillar 775F 2010 Caterpillar 775F

/ Save to Watch List

Email Dealer

Apply for Financing

Auction Pricing



   Auction Info: Starting on 2026-11-25   Click here to place a bid



Machine Info:

Serial Number:CAT0775FPDLS01059
Machine Location:AUSTRALIA, AUS

Description:

Additional Information Available Closing Time: 2026-11-25 04:00:00 PM


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Approximate Weights - Dual Slope
Body 29,877 lbs (13,552 kg)
Approximate Weights - Flat Floor
Body 29,665 lbs (13,456 kg)
Body Hoists
Body Lower Time - Float 12.5 s
Body Raise Time - High Idle 9.5 s
Pump Flow - High Idle 148 gpm (560 lpm)
Relief Valve Setting - Lower 500 psi
Relief Valve Setting - Raise 2,750 psi
Brakes
Brake Standards ISO 3450: 1996
Brake Surface - Front 216 in2
Brake Surface - Rear 9497 in2
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (Sae) 56 cu yd
Struck 43 cu yd
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (Sae) 55 cu yd
Struck 42 cu yd
Dimensions
Centerline Front Tire Width 11 ft (3 m)
Centerline Of Rear Dual Tire Width 9 ft (3 m)
Dump Clearance 2 ft (1 m)
Dump Ground Clearance 2 ft (1 m)
Dump Height 30 ft (9 m)
Engine Guard Clearance 2 ft (1 m)
Front Canopy Height 15 ft (4 m)
Ground Clearance 3 ft (1 m)
Height - Top Of Rops 14 ft (4 m)
Inside Body Depth - Maximum 7 ft (2 m)
Inside Body Length 20 ft (6 m)
Inside Body Width 13 ft (4 m)
Loading Height - Empty 13 ft (4 m)
Operating Width 17 ft (5 m)
Outside Body Width 14 ft (4 m)
Overall Body Length 30 ft (9 m)
Overall Canopy Width 16 ft (5 m)
Overall Height 15 ft (4 m)
Overall Height - Body Raised 30 ft (9 m)
Overall Length 34 ft (10 m)
Overall Tire Width 15 ft (4 m)
Overall Width 18 ft (5 m)
Rear Axle - Clearance 2 ft (1 m)
Rear Axle - Tail 9 ft (3 m)
Wheel Base 14 ft (4 m)
Wheelbase 14 ft (4 m)
Dump
Dump Angle 60 degrees
Load Capacity - Heaped 55 cu yd
Load Capacity - Struck 42 cu yd
Lower Time 13 sec
Raise Time 10 sec
Rated Payload 140,000 lbs (63,503 kg)
Engine
Aspiration Turbocharged
Bore 5 in (14 cm)
Displacement 1,649 cu in (27,022 cu cm)
Engine Make 2,236
Engine Model Cat C27 ACERT
Flywheel Power 740 hp (552 kw)
Gross Power 787 hp (587 kw)
Gross Power - Sae J1995 787 hp (587 kw)
Max Torque 2,582 lbs ft (3,501 nm)
Net Power 740 hp (552 kw)
Net Power - 80/1269/Eec 740 hp (552 kw)
Net Power - Cat 740 hp (552 kw)
Net Power - Iso 9249 740 hp (552 kw)
Net Power - Sae J1349 740 hp (552 kw)
Number Of Cylinders 12
Peak Torque 2,582 lbs ft (3,501 nm)
Power Measured @ 2,000 rpm
Rated Engine Speed 2,000 rpm
Stroke 6 in (15 cm)
Final Drives
Differential Ratio 3.64:1
Planetary Ratio 4.80:1
Total Reduction Ratio 17.49:1
General Specifications
Approx. Weight (Since 2006) 100,575 lbs (45,620 kg)
Body System Weight (Since 2010) 29,877 lbs (13,552 kg)
Body Type (Since 2010) Medium Impact Steel Dual Slope
Bore (Since 2010) 5 in (137 mm)
Capacity - Heaped (2:1) (SAE) (Since 2010) 56 cu yd (43 cu m)
Capacity - Struck (SAE) (Since 2010) 43 cu yd (33 cu m)
Capacity Metric Tons (U.S. Tons (Since 2006) 70 tons (64 tonnes)
Chassis Weight (Since 2010) 70,908 lbs (32,164 kg)
Dimensions Height (Since 2006) 175 in (4 m)
Displacement (Since 2010) 1,649 cu in (27 L)
Distribution Empty - Front (Since 2010) 49 %
Distribution Empty - Rear (Since 2010) 51 %
Distribution Loaded - Front (Since 2010) 33 %
Distribution Loaded - Rear (Since 2010) 67 %
Dumping Height (55° (Since 2006) 365 in (9 m)
Dumping Height (55°) (Since 2006) 9.26 (30'5 in
Engine Model (Since 2010) C27 ACERT
Flywheel Kilowatts (Horse- power (Since 2006) 740 hp (552 kW)
Fuel Tank Refill Capacity (Since 2010) 185 US gal (700 L)
GENERAL DIMENSIONS (Empty) - Body Length (Target Length) (Since 2010) 241 in (6 m)
GENERAL DIMENSIONS (Empty) - Front Tire Tread (Since 2010) 126 in (3 m)
GENERAL DIMENSIONS (Empty) - Height at Full Dump (Since 2010) 365 in (9 m)
GENERAL DIMENSIONS (Empty) - Height to Canopy Rock Guard Rail (Since 2010) 174 in (4 m)
GENERAL DIMENSIONS (Empty) - Loading Height (Empty) (Since 2010) 155 in (4 m)
GENERAL DIMENSIONS (Empty) - Overall Length (Operating) (Since 2010) 407 in (10 m)
GENERAL DIMENSIONS (Empty) - Overall Length (Shipping) (Since 2010) 363 in (9 m)
GENERAL DIMENSIONS (Empty) - Wheelbase (Since 2010) 166 in (4 m)
GENERAL DIMENSIONS (Empty) - Width (Operating) (Since 2010) 206 in (5 m)
GENERAL DIMENSIONS (Empty) - Width (Shipping) (Since 2010) 156 in (4 m)
Gross Machine Weight (Since 2010) 242,000 lbs (109,769 kg)
Gross Power (Since 2010) 787 hp (587 kW)
Length (Since 2006) 407 in (10 m)
Loading Height (Since 2006) 156 in (4 m)
Machine Clearance Turning Circle (Since 2010) 1,028 in (26 m)
Net Power (Since 2010) 740 hp (552 kW)
Number of Cylinders (Since 2010) 12
Product Identification Prefix (Since 2006) DLS, EYG
Standard Tires (Since 2010) 24.00R35 (E4
Stroke (Since 2010) 6 in (152 mm)
Target Payload (Since 2010) 141,215 lbs (64,053 kg)
Tire Ply / Star Rating (Since 2010) 42
Tire Size (Since 2006) 24.00R35 (E-4
Tire Type (Since 2010) E-3
Top Speed (Loaded) (Since 2010) 42 mph (68 km/h)
Turning Circle (Since 2006) 1,028 in (26 m)
Width (Since 2006) 214 in (5 m)
Operating Specifications
Body Capacity - Sae 2:1 55 cu yd
Lower Time 12.5 s
Maximum Capacity 140,000 lbs (63,503 kg)
Maximum Working Payload (110%) 154,000 lbs (69,853 kg)
Nominal Payload Class (100%) 140,000 lbs (63,503 kg)
Not To Exceed Payload (120%)* 168,000 lbs (76,204 kg)
Raise Time 9.5 s
Steer Angle 31 degrees
Top Speed - Loaded 42 mph (67 kph)
Turning Diameter - Front 77 ft (24 m)
Operational
Brake/Hoist System Fluid Capacity 81 gal (307 l)
Cooling System Fluid Capacity 46 gal (174 l)
Diff And Final Drive Fluid Capacity 41 gal (155 l)
Engine Oil Capacity 19 gal (72 l)
Fuel Capacity 185 gal (700 l)
Hydraulic System Fluid Capacity 19 gal (72 l)
Steering System Fluid Capacity 16 gal (61 l)
Tire Size 24.00R35(E4)
Rops
Rops/Fops Standards .ISO 3471:1994 ISO 3449:1992 Level II
Service Refill Capacities
Brake / Hoist / Fan Hydraulic Tank 35 gal (132 l)
Brake Hoist System - Includes Tank 81 gal (307 l)
Cooling System 46 gal (174 l)
Crankcase 25 gal (95 l)
Differential - Final Drives 41 gal (155 l)
Fuel Tank 185 gal (700 l)
Steering System - Including Tank 16 gal (61 l)
Steering Tank 9 gal (34 l)
Torque Converter - Transmission System 14 gal (53 l)
Torque Converter - Transmission System - Including Sump 19 gal (72 l)
Sound
Sound Standards ANSI/SAE J1166 MAY90.
Steering
Steer Angle 31 degrees
Steering Standards SAE J1511 OCT90, ISO 5010: 1992
Turning Circle - Clearance Diameter 86 ft (26 m)
Turning Diameter - Front 77 ft (24 m)
Suspension
Effective Cylinder Stroke - Front 9 in (24 cm)
Effective Cylinder Stroke - Rear 6 in (15 cm)
Rear Axle - Oscillation 8 degrees
Tires
Standard Tire 24.00R35 (E4)
Transmission
Forward - 1 7 mph (11 kph)
Forward - 2 9 mph (15 kph)
Forward - 3 13 mph (20 kph)
Forward - 4 17 mph (27 kph)
Forward - 5 23 mph (37 kph)
Forward - 6 31 mph (50 kph)
Forward - 7 42 mph (67 kph)
Max Speed 42 mph (67 kph)
Number Of Gears - Forward 7
Number Of Gears - Reverse 1
Reverse 8.8 mile/h
Transmission Type Gear
Weight Distributions - Approximate
Front Axle - Empty 49 %
Front Axle - Loaded 33 %
Rear Axle - Empty 51 %
Rear Axle - Loaded 67 %
Weights
Empty Weight 105,831 lbs (48,004 kg)
Loaded Weight 242,001 lbs (109,770 kg)
Weight Distribution Front - Empty 49 %
Weight Distribution Front - Loaded 33 %
Weight Distribution Rear - Empty 51 %
Weight Distribution Rear - Loaded 67 %

Dealer Contact Info:

Ritchie Bros. Auctioneers



Contact:

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.