Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-09-16 Click here to place a bid
| Hours: | 47847 |
| Serial Number: | CAT0777DPAGC01131 |
| Machine Location: | TORONTO, ON |
Supplied by HeavyEquipmentData.com →
| Approximate Weights - Dual Slope | |
| Body | 34,785 lbs (15,776 kg) |
| Chassis | 106,964 lbs (48,510 kg) |
| Approximate Weights - Dual Slope Lined | |
| Body | 46,840 lbs (21,243 kg) |
| Body Hoists | |
| Body Lower Time - Float | 13 s |
| Body Power Down - High Idle | 13 s |
| Body Raise Time - High Idle | 15 s |
| Pump Flow - High Idle | 119 gpm (450 lpm) |
| Relief Valve Setting - Lower | 3,450 psi |
| Relief Valve Setting - Raise | 2,750 psi |
| Brakes | |
| Brake Standards | ISO 3450: 1996; SAE J1473 OCT90 |
| Brake Surface - Front | 432 in2 |
| Brake Surface - Rear | 15828 in2 |
| Capacity - Dual Slope - 100% Fill Factor | |
| Heaped 2:1 (Sae) | 79 cu yd |
| Struck | 55 cu yd |
| Dimensions | |
| Centerline Front Tire Width | 14 ft (4 m) |
| Centerline Of Rear Dual Tire Width | 12 ft (4 m) |
| Dump Clearance | 3 ft (1 m) |
| Dump Ground Clearance | 3 ft (1 m) |
| Dump Height | 33 ft (10 m) |
| Engine Guard Clearance | 2 ft (1 m) |
| Front Canopy Height | 17 ft (5 m) |
| Ground Clearance | 2 ft (1 m) |
| Height - Top Of Rops | 15 ft (5 m) |
| Inside Body Depth - Maximum | 6 ft (2 m) |
| Inside Body Length | 24 ft (7 m) |
| Inside Body Width | 17 ft (5 m) |
| Loading Height - Empty | 14 ft (4 m) |
| Operating Width | 20 ft (6 m) |
| Outside Body Width | 18 ft (6 m) |
| Overall Body Length | 31 ft (10 m) |
| Overall Canopy Width | 19 ft (6 m) |
| Overall Height | 16 ft (5 m) |
| Overall Height - Body Raised | 33 ft (10 m) |
| Overall Length | 32 ft (10 m) |
| Overall Tire Width | 17 ft (5 m) |
| Overall Width | 20 ft (6 m) |
| Rear Axle - Clearance | 3 ft (1 m) |
| Rear Axle - Tail | 9 ft (3 m) |
| Wheel Base | 15 ft (5 m) |
| Wheelbase | 15 ft (5 m) |
| Dump | |
| Load Capacity - Heaped | 79 cu yd |
| Load Capacity - Struck | 55 cu yd |
| Raise Time | 15 sec |
| Rated Payload | 200,000 lbs (90,703 kg) |
| Engine | |
| Bore | 7 in (17 cm) |
| Displacement | 2,105 cu in (34,495 cu cm) |
| Engine Make | 2,236 |
| Engine Model | 3508A |
| Engine Model | Cat 3508B EUI |
| Flywheel Power | 938 hp (699 kw) |
| Gross Power | 1,000 hp (746 kw) |
| Gross Power - Sae J1995 | 1,000 hp (746 kw) |
| Max Torque | 3,476 lbs ft (4,713 nm) |
| Net Power | 938 hp (699 kw) |
| Net Power - 80/1269/Eec | 938 hp (699 kw) |
| Net Power - Cat | 938 hp (699 kw) |
| Net Power - Iso 9249 | 938 hp (699 kw) |
| Net Power - Sae J1349 | 938 hp (699 kw) |
| Number Of Cylinders | 8 |
| Rated Engine Speed | 1,750 rpm |
| Stroke | 8 in (19 cm) |
| Torque Measured @ | 1,300 rpm |
| Torque Rise | 23 % |
| Final Drives | |
| Differential Ratio | 2.74:1 |
| Planetary Ratio | 7.00:1 |
| Total Reduction Ratio | 19.16:1 |
| Operating Specifications | |
| Body Capacity - Sae 2:1 | 79 cu yd |
| Body Capacity - Struck | 55 cu yd |
| Circle Clearance Diameter | 86 ft (26 m) |
| Lower Time | 14 s |
| Maximum Capacity | 178,920 lbs (81,143 kg) |
| Nominal Payload Class (100%) | 178,920 lbs (81,143 kg) |
| Raise Time | 15 s |
| Steer Angle | 32 degrees |
| Top Speed - Loaded | 40 mph (64 kph) |
| Operational | |
| Brake/Hoist System Fluid Capacity | 110 gal (415 l) |
| Cooling System Fluid Capacity | 86 gal (325 l) |
| Diff And Final Drive Fluid Capacity | 87 gal (329 l) |
| Engine Oil Capacity | 33 gal (124 l) |
| Fuel Capacity | 300 gal (1,137 l) |
| Hydraulic System Fluid Capacity | 37 gal (138 l) |
| Steering System Fluid Capacity | 22 gal (84 l) |
| Rops | |
| Rops/Fops Standards | SAE J1040 MAY94, ISO 3471:1997 |
| Service Refill Capacities | |
| Brake Hoist System - Includes Tank | 110 gal (415 l) |
| Cooling System | 86 gal (326 l) |
| Differential - Final Drives | 87 gal (329 l) |
| Fuel Tank | 300 gal (1,136 l) |
| Steering System - Including Tank | 22 gal (83 l) |
| Steering Tank | 15 gal (57 l) |
| Torque Converter - Brake - Hoist Hydraulic Tank | 66 gal (250 l) |
| Torque Converter - Brake - Hoist System - Including Tank | 133 gal (503 l) |
| Torque Converter - Transmission System - Including Sump | 37 gal (138 l) |
| Sound | |
| Sound Standards | ANSI/SAE J1166 MAY90, SAE J88 JUN96 |
| Steering | |
| Steer Angle | 32 degrees |
| Steering Standards | SAE J1511 OCT90, ISO 5010:1992 (E) |
| Suspension | |
| Effective Cylinder Stroke - Front | 13 in (32 cm) |
| Effective Cylinder Stroke - Rear | 7 in (17 cm) |
| Rear Axle - Oscillation | 5 degrees |
| Tires | |
| Standard Tire | 27.00-R49 (E4) |
| Transmission | |
| Forward - 1 | 7 mph (10 kph) |
| Forward - 2 | 9 mph (14 kph) |
| Forward - 3 | 12 mph (19 kph) |
| Forward - 4 | 16 mph (26 kph) |
| Forward - 5 | 22 mph (35 kph) |
| Forward - 6 | 29 mph (47 kph) |
| Forward - 7 | 40 mph (64 kph) |
| Max Speed | 38 mph (61 kph) |
| Number Of Gears - Forward | 7 |
| Number Of Gears - Reverse | 1 |
| Reverse | 7.4 mile/h |
| Transmission Type | automatic power shift |
| Weight Distributions - Approximate | |
| Front Axle - Empty | 47 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Empty | 53 % |
| Rear Axle - Loaded | 67 % |
| Weights | |
| Empty Weight | 155,000 lbs (70,295 kg) |
| Loaded Weight | 355,011 lbs (161,003 kg) |
| Weight Distribution Front - Empty | 45.4 % |
| Weight Distribution Front - Loaded | 33.3 % |
| Weight Distribution Rear - Empty | 54.6 % |
| Weight Distribution Rear - Loaded | 66.7 % |
| Weights - Approximate | |
| Body Weight | 34,800 lbs (15,782 kg) |
| Chassis Weight | 107,100 lbs (48,571 kg) |
| Operating Weight - Empty | 141,749 lbs (64,285 kg) |
| Operating Weight - Loaded | 355,000 lbs (160,998 kg) |
| Target Gross Machine Operating Weight | 360,000 lbs (163,265 kg) |