Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $169,000.00 USD
Apply for Financing| Hours: | 41742 |
| Serial Number: | JRP02395 |
| Machine Location: | CHIHUAHUA, ?? |
| More Information: | https://catused.com/cu/10121712 |
Supplied by HeavyEquipmentData.com →
| Approximate Weights - Dual Slope | |
| Body | 36,200 lbs (16,420 kg) |
| Body - Dual Slope Rubber Lined | 51,114 lbs (23,185 kg) |
| Chassis | 107,756 lbs (48,877 kg) |
| Chassis - Dual Slope Rubber Lined | 107,756 lbs (48,877 kg) |
| Empty Chassis Weight - Dual Slope Lined | 154,753 lbs (70,195 kg) |
| Empty Machine Weight - Dual Slope Lined | 107,756 lbs (48,877 kg) |
| Front Axle - Empty | 45 % |
| Front Axle - Loaded | 33 % |
| Gross Vehicle - Dual Slope Rubber Lined | 156,963 lbs (71,197 kg) |
| Gross Weight - Empty | 142,039 lbs (64,428 kg) |
| Rear Axle - Empty | 55 % |
| Rear Axle - Loaded | 67 % |
| Body Hoists | |
| Body Power Down - High Idle | 12 s |
| Body Raise Time - High Idle | 15 s |
| High Idle Body Lower Time - Float | 10 s |
| Pump Flow - High Idle | 130 gpm (492 lpm) |
| Relief Valve Setting - Lower | 500 psi |
| Relief Valve Setting - Raise | 2,750 psi |
| Braking System | |
| Brake Surface - Front | 6235 in2 |
| Brake Surface - Rear | 15828 in2 |
| Standards | ISO 3450:1996 |
| Capacity - Dual Slope - 100% Fill Factor | |
| Heaped (Sae 2:1) | 79 cu yd |
| Struck | 55 cu yd |
| Dimensions | |
| Centerline Front Tire Width | 13 ft (4 m) |
| Centerline Of Rear Dual Tire Width | 12 ft (4 m) |
| Dump Clearance | 3 ft (1 m) |
| Dump Ground Clearance | 3 ft (1 m) |
| Dump Height | 34 ft (10 m) |
| Engine Guard Clearance | 3 ft (1 m) |
| Front Canopy Height | 17 ft (5 m) |
| Ground Clearance | 3 ft (1 m) |
| Height - Top Of Rops | 15 ft (5 m) |
| Inside Body Depth - Maximum | 6 ft (2 m) |
| Inside Body Length | 22 ft (7 m) |
| Inside Body Width | 17 ft (5 m) |
| Loading Height - Empty | 14 ft (4 m) |
| Operating Width | 21 ft (6 m) |
| Outside Body Width | 18 ft (6 m) |
| Overall Body Length | 32 ft (10 m) |
| Overall Canopy Width | 20 ft (6 m) |
| Overall Height | 17 ft (5 m) |
| Overall Height - Body Raised | 34 ft (10 m) |
| Overall Length | 35 ft (11 m) |
| Overall Tire Width | 17 ft (5 m) |
| Overall Width | 21 ft (6 m) |
| Rear Axle - Clearance | 3 ft (1 m) |
| Rear Axle - Tail | 10 ft (3 m) |
| Wheel Base | 15 ft (5 m) |
| Wheelbase | 15 ft (5 m) |
| Dump | |
| Dump Angle | 49 degrees |
| Load Capacity - Heaped | 79 cu yd |
| Load Capacity - Struck | 55 cu yd |
| Lower Time | 13 sec |
| Raise Time | 15 sec |
| Rated Payload | 200,000 lbs (90,719 kg) |
| Engine | |
| Aspiration | Turbocharged |
| Bore | 6 in (14 cm) |
| Displacement | 1,959 cu in (32,102 cu cm) |
| Engine Make | 2,236 |
| Engine Model | C32 ACERT |
| Engine Model | Cat C32 ACERT |
| Gross Power | 1,016 hp (758 kw) |
| Gross Power - Sae J1995 | 1,016 hp (758 kw) |
| Max Torque | 3,478 lbs ft (4,715 nm) |
| Net Power | 939 hp (700 kw) |
| Net Power - 80/1269/Eec | 939 hp (700 kw) |
| Net Power - Cat | 939 hp (700 kw) |
| Net Power - Iso 9249 | 939 hp (700 kw) |
| Net Power - Sae J1349 | 939 hp (700 kw) |
| Number Of Cylinders | 12 |
| Peak Torque | 2,478 lbs ft (3,360 nm) |
| Stroke | 6 in (16 cm) |
| Final Drives | |
| Differential Ratio | 2.74:1 |
| Planetary Ratio | 7.00:1 |
| Total Reduction Ratio | 19.16:1 |
| Operating Specifications | |
| Maximum Capacity Struck (Sae) | 55 cu yd |
| Maximum Payload Capacity | 200,000 lbs (90,719 kg) |
| Nominal Payload Capacity | 200,000 lbs (90,719 kg) |
| Sae (2:1) Capacity | 79 cu yd |
| Steer Angle | 305 degrees |
| Top Speed - Loaded | 40 mph (65 kph) |
| Turning Diameter - Front | 83 ft (25 m) |
| Operational | |
| Brake/Hoist System Fluid Capacity | 133 gal (503 l) |
| Cooling System Fluid Capacity | 61 gal (231 l) |
| Diff And Final Drive Fluid Capacity | 70 gal (265 l) |
| Engine Oil Capacity | 133 gal (503 l) |
| Fuel Capacity | 300 gal (1,136 l) |
| Hydraulic System Fluid Capacity | 50 gal (189 l) |
| Steering System Fluid Capacity | 15 gal (57 l) |
| Tire Size | 27.00R49(E4) |
| Rops | |
| Rops Standards | .ISO 3471:1994 ISO 3449:1992 Level II |
| Service Refill Capacities | |
| Brake Hoist System - Includes Tank | 133 gal (503 l) |
| Brake/Hoist Hydraulic Tank | 50 gal (189 l) |
| Cooling System | 61 gal (231 l) |
| Crankcase | 30 gal (114 l) |
| Differential - Final Drives | 70 gal (265 l) |
| Fuel Tank - Standard | 300 gal (1,136 l) |
| Steering System - Including Tank | 15 gal (57 l) |
| Steering Tank | 8 gal (30 l) |
| Torque Converter/Transmission System - Including Sump | 65 gal (246 l) |
| Transmission Tank | 12 gal (45 l) |
| Sound | |
| Sound Standards | .ANSI/J919 APR95 SAE J88 APR95 |
| Steering | |
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Suspension | |
| Effective Cylinder Stroke - Front | 13 in (32 cm) |
| Effective Cylinder Stroke - Rear | 7 in (17 cm) |
| Tires | |
| Standard Tires | 27.00R49 (E4) |
| Transmission | |
| Forward - 1 | 7 mph (10 kph) |
| Forward - 2 | 9 mph (14 kph) |
| Forward - 3 | 12 mph (19 kph) |
| Forward - 4 | 16 mph (26 kph) |
| Forward - 5 | 22 mph (35 kph) |
| Forward - 6 | 30 mph (48 kph) |
| Forward - 7 | 40 mph (65 kph) |
| Max Speed | 40 mph (65 kph) |
| Number Of Gears - Forward | 7 |
| Number Of Gears - Reverse | 1 |
| Reverse | 7.5 mile/h |
| Transmission Type | Seven-speed planetary power shift |
| Weights | |
| Empty Weight | 163,090 lbs (73,976 kg) |
| Loaded Weight | 360,000 lbs (163,293 kg) |
| Weight Distribution Front - Empty | 45 % |
| Weight Distribution Front - Loaded | 33 % |
| Weight Distribution Rear - Empty | 55 % |
| Weight Distribution Rear - Loaded | 67 % |
| Weights - Approximate | |
| Body Weight - Msd | 36,200 lbs (16,420 kg) |
| Chassis Weight | 107,756 lbs (48,877 kg) |
| Gross Machine Operating Weight (Gmw) | 36,200 lbs (16,420 kg) |
| Operating Weight - Empty | 163,090 lbs (73,976 kg) |
| Operating Weight - Loaded | 360,000 lbs (163,293 kg) |