Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-10-27 Click here to place a bid
| Serial Number: | MSY 00486 |
| Machine Location: | HALLSVILLE, TX |
| More Information: | https://www.jeffmartinauctioneers.com/auctions/1279/lot/333656-2014-CAT-785D-RIGID-FRAME-HAUL-TRUCK-SN%3A-MSY-00486 |
Supplied by HeavyEquipmentData.com →
| Body - Dual Slope | |
| Body Weight | 49,150 lbs (22,290 kg) |
| Heaped (Sae 2:1) | 102 cu yd |
| Body - X | |
| Body Weight | 55,468 lbs (25,156 kg) |
| Heaped (Sae 2:1) | 111 cu yd |
| Body Hoists | |
| Body Lower Time - Float | 16.2 s |
| Body Lower Time - High Idle | 15.9 s |
| Body Power Down - High Idle | 15.9 s |
| Body Raise Time - High Idle | 15.2 s |
| Pump Flow - High Idle | 198 gpm (749 lpm) |
| Relief Valve Setting - Raise | 2,500 psi |
| Brakes | |
| Brake Surface - Front | 9497 in2 |
| Brake Surface - Rear | 13908 in2 |
| Standards | SAE J1473 OCT90 ISO 3450-1985 |
| Dimensions | |
| Dump Ground Clearance | 4 ft (1 m) |
| Dump Height | 39 ft (12 m) |
| Ground Clearance | 3 ft (1 m) |
| Overall Height | 17 ft (5 m) |
| Overall Length | 38 ft (12 m) |
| Overall Width | 22 ft (7 m) |
| Wheelbase | 17 ft (5 m) |
| Dump | |
| Load Capacity - Heaped | 102 cu yd |
| Lower Time | 16 sec |
| Raise Time | 15 sec |
| Rated Payload | 300,000 lbs (136,054 kg) |
| Engine | |
| Bore | 7 in (17 cm) |
| Displacement | 3,574 cu in (58,561 cu cm) |
| Engine Make | 2,236 |
| Engine Model | 3512C HD |
| Engine Model | Cat 3512C HD |
| Gross Power | 1,450 hp (1,081 kw) |
| Gross Power - Sae J1995 | 1,450 hp (1,081 kw) |
| Net Power | 1,348 hp (1,005 kw) |
| Net Power - 80/1269/Eec | 1,348 hp (1,005 kw) |
| Net Power - Cat | 1,348 hp (1,005 kw) |
| Net Power - Iso 9249 | 1,348 hp (1,005 kw) |
| Net Power - Sae J1349 | 1,348 hp (1,005 kw) |
| Power Measured @ | 1,750 rpm |
| Rated Power | 1,450 hp (1,081 kw) |
| Stroke | 8 in (21 cm) |
| Torque Rise | 23 % |
| Final Drives | |
| Differential Ratio | 2.10:1 |
| Planetary Ratio | 10.83:1 |
| Total Reduction Ratio | 22.75:1 |
| General Specifications | |
| Articulated/Rigid (Since 2016) | R |
| Drive Configuration (Since 2016) | 2WD |
| Engine Type (Since 2016) | Cat 3512C HD |
| Mfg. Model (Since 2018) | 785D |
| Operating Weight (Since 2016) | 550,000 lbs (249,433 kg) |
| Planetary Powershift Transmission (Since 2016) | Auto |
| Rated Payload (Since 2016) | 136 t (136,000 kg) |
| Operating Specifications | |
| Machine Clearance Turning Diameter | 109 ft (33 m) |
| Maximum Target Payload | 314,000 lbs (142,404 kg) |
| Minimum Target Payload | 288,000 lbs (130,612 kg) |
| Steer Angle | 36 degrees |
| Target Payload - Dual Slope* | 292,000 lbs (132,426 kg) |
| Top Speed - Loaded | 34 mph (55 kph) |
| Turning Diameter - Front | 98 ft (30 m) |
| Operational | |
| Brake/Hoist System Fluid Capacity | 169 gal (641 l) |
| Cooling System Fluid Capacity | 100 gal (379 l) |
| Diff And Final Drive Fluid Capacity | 115 gal (436 l) |
| Engine Oil Capacity | 54 gal (204 l) |
| Fuel Capacity | 500 gal (1,893 l) |
| Hydraulic System Fluid Capacity | 89 gal (337 l) |
| Steering System Fluid Capacity | 31 gal (117 l) |
| Tire Size | 33.00-51 50PR (E3 & E4) |
| Rops | |
| Rops Standards | SAE J1040 APR88 ISO 3471:1994 |
| Service Refill Capacities | |
| Brake Hoist System - Includes Tank | 169 gal (640 l) |
| Brake/Hoist Hydraulic Tank | 89 gal (337 l) |
| Cooling System | 100 gal (379 l) |
| Crankcase | 54 gal (204 l) |
| Differential - Final Drives | 115 gal (435 l) |
| Fuel Tank - Standard | 500 gal (1,893 l) |
| Steering System - Including Tank | 31 gal (117 l) |
| Steering Tank | 24 gal (91 l) |
| Torque Converter/Transmission System - Including Sump | 66 gal (248 l) |
| Sound | |
| Sound Standards | ANSI/SAE J1166 MAY90 SAE J88 APR95 |
| Steering | |
| Steering Standards | SAE J1511 OCT90 ISO 5010:1992 |
| Suspension | |
| Effective Cylinder Stroke - Front | 12 in (31 cm) |
| Effective Cylinder Stroke - Rear | 7 in (17 cm) |
| Tires | |
| Standard Tires | 33.00-R51 (E3 & E4) |
| Transmission | |
| Forward - 1 | 8 mph (12 kph) |
| Forward - 2 | 10 mph (16 kph) |
| Forward - 3 | 14 mph (22 kph) |
| Forward - 4 | 19 mph (30 kph) |
| Forward - 5 | 25 mph (41 kph) |
| Forward - 6 | 34 mph (55 kph) |
| Max Speed | 34 mph (55 kph) |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 1 |
| Reverse | 6.8 mile/h |
| Weight Distributions - Approximate | |
| Front Axle - Empty* | 45-46% |
| Front Axle - Loaded - Target | 33 % |
| Rear Axle - Empty* | 54-55% |
| Rear Axle - Loaded - Target | 67 % |
| Weights | |
| Empty Weight | 259,257 lbs (117,577 kg) |
| Loaded Weight | 550,000 lbs (249,433 kg) |
| Weight Distribution Front - Empty | 46 % |
| Weight Distribution Front - Loaded | 33 % |
| Weight Distribution Rear - Empty | 55 % |
| Weight Distribution Rear - Loaded | 67 % |
| Weights - Approximate | |
| Body Weight Range | 20 831 - 30 623 kg 45,924 - 67,512 lb |
| Gross Machine Operating Weight (Gmw) | 550,000 lbs (249,433 kg) |
| Minimum/Maximum Operating Chassis Weight Range (Ocw) | 83 304 - 84 668 kg 183,654 - 186,661 lb |
| Minimum/Maximum Operating Chassis Weight Range Empty (Eomw) | 106 218 - 117 597 kg 234,170 - 259,257 lb |