Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-11-25 Click here to place a bid
| Hours: | 4910 |
| Serial Number: | CATCP563ABWE00382 |
| Machine Location: | AUSTRALIA, AUS |
Supplied by HeavyEquipmentData.com →
| Blades | |
| Blade Height | 27 in (68 cm) |
| Blade Width | 8 ft (3 m) |
| Dimensions | |
| Ground Clearance | 18 in (46 cm) |
| Height - Top of Cab | 10 ft (3 m) |
| Overall Length w/ Blade | 21 ft (6 m) |
| Overall Length w/o Blade | 19 ft (6 m) |
| Turning Radius - Inside | 145 in (368 cm) |
| Wheelbase | 10 in (24 cm) |
| Width Over Tires | 8 ft (2 m) |
| Drum | |
| Centrifugal Force - High | 59,799 lbs (27,124 kg) |
| Centrifugal Force - Low | 29,900 lbs (13,562 kg) |
| Drum Diameter | 51 in (130 cm) |
| Nominal Amplitude - High | 0 in (0 cm) |
| Nominal Amplitude - Low | 0 in (0 cm) |
| Number of Pads | 140 |
| Pad Height | 5 in (13 cm) |
| Pad Surface Area | 14 cu in (228 cu cm) |
| Vibration Frequency 1 | 32 vpm |
| Engine | |
| Aspiration | turbocharged |
| Displacement | 366 cu in (6,001 cu cm) |
| Engine Model | 3056E ATAAC |
| Gross Power | 150 hp (112 kw) |
| Make | Caterpillar |
| Net Power | 144 hp (107 kw) |
| General Specifications | |
| Displacement (Since 2006) | 365 cu in (6 L) |
| Drive (Since 2006) | Drum/Rear Wheel |
| Engine Model (Since 2006) | 3056E |
| General Dimensions - Curb clearance (Since 2006) | 20 in (505 mm) |
| General Dimensions - Drum diameter over pads (Since 2006) | 61 in (1,549 mm) |
| General Dimensions - Drum width (Since 2006) | 84 in (2,130 mm) |
| General Dimensions - Overall height (Since 2006) | 121 in (3,070 mm) |
| General Dimensions - Overall length (Since 2006) | 227 in (5,760 mm) |
| General Dimensions - Overall width w/blade (Since 2006) | 98 in (2,500 mm) |
| General Dimensions - Overall width w/o blade (Since 2006) | 90 in (2,290 mm) |
| General Dimensions - Tires (Since 2006) | 23.1 x 26-8 ply |
| General Dimensions - Wheel to drum (Since 2006) | 114 in (2,900 mm) |
| Gross Power (Since 2006) | 150 hp (112 kW) |
| Max. Speed (For./Rev.) (Since 2006) | 7 mph (11 km/h) |
| No. Cylinders (Since 2006) | 6 |
| Operating Weight (Since 2006) | 25,479 lbs (11,555 kg) |
| Rated Engine RPM (Since 2006) | 2,200 rpm |
| Service Refill Capacities - Crankcase (Since 2006) | 3 US gal (12 L) |
| Service Refill Capacities - Fuel tank (Since 2006) | 87 US gal (330 L) |
| Service Refill Capacities - Hydraulic fluid (Since 2006) | 17 US gal (64 L) |
| Speeds (Since 2006) | 2 forward/2 reverse |
| Steering - Inside radius (Since 2006) | 145 in (3,680 mm) |
| Steering - Outside radius (Since 2006) | 229 in (5,810 mm) |
| Steering - Steering angle (Since 2006) | ±34 deg |
| Vibratory System - Amplitude (Since 2006) | 2 |
| Vibratory System - Centrifugal Force - Maximum (Since 2006) | 60,000 lbf (266 kN) |
| Vibratory System - Centrifugal Force - Minimum (Since 2006) | 30,000 lbf (133 kN) |
| Vibratory System - Ecc. Weight Drive (Since 2006) | Hydraulic |
| Vibratory System - Frequency (Since 2006) | 31.9 Hz 1914 vpm |
| Vibratory System - High amplitude (Since 2006) | 0 in (2 mm) |
| Vibratory System - Low amplitude (Since 2006) | 0 in (1 mm) |
| Operating Specifications | |
| Alternator Supplied Amperage | 55 amps |
| Cooling System Fluid Capacity | 7 gal (26 l) |
| Engine Oil Capacity | 3 gal (12 l) |
| Fuel Capacity | 87 gal (330 l) |
| Hydraulic System Fluid Capacity | 17 gal (64 l) |
| Max Speed | 7 mph (12 kph) |
| Operating Voltage | 24 volts |
| Operating Weight | 26,191 lbs (11,880 kg) |
| Operating Width | 90 in (229 cm) |
| Tires | |
| Tires | 23.1x26 10ply |