| Cab |
|
Exterior Sound Level |
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A). |
|
Rops/Fops |
Meets SAE and ISO standards |
| Dimensions |
|
Axle To Vertical Hitch Pin |
21 in (54 cm)
|
|
Front Of Tractor To Front Axle |
123 in (312 cm)
|
|
Ground Clearance - Tractor |
22 in (56 cm)
|
|
Height |
13 ft (4 m)
|
|
Height - Overall Shipping |
159 in (403 cm)
|
|
Height - Scraper Blade Maximum |
21 in (52 cm)
|
|
Height - Top Of Cab |
12 ft (4 m)
|
|
Length |
46 ft (14 m)
|
|
Length - Maximum (Push-Pull) |
613 in (1,558 cm)
|
|
Length - Overall Machine - Standard |
552 in (1,402 cm)
|
|
Rear Axle - Rear Of Machine |
114 in (290 cm)
|
|
Weight |
90,213 lbs (40,920 kg)
|
|
Wheel Base |
26 ft (8 m)
|
|
Width |
12 ft (4 m)
|
|
Width - Inside Of Bowl |
120 in (305 cm)
|
|
Width - Outside Rear Tires |
129 in (327 cm)
|
|
Width - Overall Machine |
141 in (358 cm)
|
|
Width - Overall Machine - Ladder Down |
149 in (379 cm)
|
|
Width - Rear Tire Centers |
90 in (229 cm)
|
|
Width - Tractor |
133 in (338 cm)
|
| Engine |
|
Engine Model - Scraper |
Cat C9.3 ACERT |
|
Engine Model - Tractor |
Cat C13 ACERT |
|
Flywheel Power - Scraper |
290 hp (216 kw)
|
|
Flywheel Power - Tractor |
407 hp (304 kw)
|
|
Note |
Cat C9.3 ACERT and Cat C13 ACERT engines meet U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards. |
|
Rated Engine Rpm - Scraper |
2,150 rpm |
|
Rated Engine Rpm - Tractor |
2,000 rpm |
| General |
|
180 Degrees Curb-To-Curb Turning Width |
39 ft (12 m)
|
|
Fuel Tank Refill Capacity - Scraper |
336 gal (1,272 l)
|
|
Maximum Depth Of Cut |
12 in (32 cm)
|
|
Maximum Depth Of Spread |
21 in (54 cm)
|
|
Overall Shipping Height |
13 ft (4 m)
|
|
Overall Width |
12 ft (4 m)
|
|
Rated Load |
26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons) |
|
Scraper Capacity - Heaped |
24 cu yd |
|
Scraper Capacity - Struck |
17 cu yd |
|
Tires - Scraper |
33.25R29**E3 |
|
Tires - Tractor Drive |
33.25R29**E3 |
|
Top Speed - Loaded |
34 mph (54 kph)
|
|
Width - Cut |
10 ft (3 m)
|
| Implement Cycle Times |
|
Apron Lower |
3.8 s |
|
Apron Raise |
2.95 s |
|
Bail Lower |
3.2 s |
|
Bail Raise |
1.8 s |
|
Bowl Lower |
3.5 s |
|
Bowl Raise |
3 s |
|
Ejector Extend |
5.2 s |
|
Ejector Retract |
6.7 s |
| Non Push-Pull |
|
Operating Weight - Empty |
90,213 lbs (40,913 kg)
|
|
Overall Length |
46 ft (14 m)
|
| Push-Pull |
|
Operating Weight - Empty |
92,980 lbs (42,168 kg)
|
|
Overall Length - With Bail Down |
51 ft (16 m)
|
| Safety Criteria Compliance Standards |
|
Brakes |
ISO 3450:1996 |
|
Falling Object Protective Structure (Fops) |
ISO 3449:2005 Level II |
|
Reverse Alarm |
ISO 9533:2010 |
|
Rollover Protection Structure (Rops) |
ISO 3471:2008 for up to 17 084 kg (37,664 lb) |
|
Seat Belt |
SAE J386:JUN1985 |
|
Steering System |
ISO 5010:2007 |
| Scraper Bowl |
|
Scraper Capacity - Heaped |
24 cu yd |
| Service Refill Capacities |
|
Cooling System - Scraper |
16 gal (61 l)
|
|
Cooling System - Tractor |
12 gal (45 l)
|
|
Crankcase - Scraper |
7 gal (28 l)
|
|
Crankcase - Tractor |
8 gal (31 l)
|
|
Diesel Exhaust Fluid - Scraper |
6 gal (21 l)
|
|
Diesel Exhaust Fluid - Tractor |
8 gal (31 l)
|
|
Fuel Tank |
336 gal (1,272 l)
|
|
Hydraulic System |
22 gal (83 l)
|
|
Transmission System - Scraper |
13 gal (49 l)
|
|
Transmission System - Tractor |
25 gal (94 l)
|
| Tractor Engine |
|
Flywheel Power - Tractor/Scraper |
304 kW (407 hp)/216 kW (290 hp) |
| Transmission |
|
Top Speed - Loaded |
34 mph (54 kph)
|
| Travel Speeds - Runout |
|
Transmission Gear - Eighth |
34 mph (54 kph)
|
|
Transmission Gear - Fifth |
14 mph (22 kph)
|
|
Transmission Gear - First |
3 mph (5 kph)
|
|
Transmission Gear - Fourth |
10 mph (16 kph)
|
|
Transmission Gear - Reverse |
6 mph (9 kph)
|
|
Transmission Gear - Second |
6 mph (9 kph)
|
|
Transmission Gear - Seventh |
25 mph (40 kph)
|
|
Transmission Gear - Sixth |
18 mph (30 kph)
|
|
Transmission Gear - Third |
8 mph (12 kph)
|
