| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab |
|
Fops |
ISO 3449:2005 Level I |
|
Fops Level Ii |
ISO 3449:2005 Level II |
|
Rops |
ISO 3471:2008 |
| Dimensions |
|
Bucket Pin Height - Carry Position |
9 in (22 cm)
|
|
Bucket Pin Height - Maximum Lift |
9 ft (3 m)
|
|
Bumper Overhang - Behind Rear Axle |
35 in (89 cm)
|
|
Clearance At Maximum Lift And Dump |
82 in (208 cm)
|
|
Departure Angle |
28 degrees |
|
Ground Clearance |
1 ft (0 m)
|
|
Height |
7 ft (2 m)
|
|
Height - Top Of Cab |
7 ft (2 m)
|
|
Length |
11 ft (3 m)
|
|
Length - With Bucket On Ground |
127 in (323 cm)
|
|
Length - Without Bucket |
99 in (252 cm)
|
|
Maximum Dump Angle |
47 degrees |
|
Maximum Overall Height |
144 in (365 cm)
|
|
Maximum Reach - With Arms Parallel To Ground |
51 in (129 cm)
|
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
|
Rack Back Angle - Maximum Height |
89 degrees |
|
Reach - Maximum Lift/Dump |
21 in (53 cm)
|
|
Turning Radius From Center - Bucket |
78 in (198 cm)
|
|
Turning Radius From Center - Coupler |
44 in (110 cm)
|
|
Turning Radius From Center - Machine Rear |
60 in (151 cm)
|
|
Vehicle Width Over Tires |
59 in (150 cm)
|
|
Weight |
5,705 lbs (2,588 kg)
|
|
Wheel Base |
3 ft (1 m)
|
|
Width |
5 ft (1 m)
|
| Engine |
|
Bore |
3 in (8 cm)
|
|
Displacement |
134 cu in (2,201 cu cm)
|
|
Engine Model |
Cat C2.2 CRDI |
|
Gross Power - Sae J1995 |
67 hp (50 kw)
|
|
Net Flywheel Power |
66 hp (49 kw)
|
|
Net Power - Iso 9249 |
67 hp (50 kw)
|
|
Net Power - Sae 1349 |
66 hp (49 kw)
|
|
Peak Torque - 1,500 Rpm - Sae J1995 |
153 lbs ft (207 nm)
|
|
Stroke |
4 in (10 cm)
|
| General Specifications |
|
category (Since 2020)
|
SKID STEERS |
|
ENGINE POWER (Since 2016)
|
60 hp (45 kw)
|
|
ENGINE POWER (2017)
|
60 hp (45 kw)
|
|
ENGINE POWER (Since 2019)
|
66 hp (49 kw)
|
|
ENGINE POWER (2020)
|
66 hp (49 kw)
|
|
MODEL (Since 2016)
|
226D |
|
MODEL (2017)
|
226D |
|
MODEL (2019)
|
226D |
|
MODEL (2020)
|
226D |
|
OPERATING LOAD (Since 2016)
|
1,550 lbs (703 kg)
|
|
OPERATING LOAD (2017)
|
1,550 lbs (703 kg)
|
|
OPERATING WIDTH (Since 2016)
|
60 in (152 cm)
|
|
OPERATING WIDTH (2017)
|
60 in (152 cm)
|
|
OPERATING WIDTH (Since 2019)
|
59 in (150 cm)
|
|
OPERATING WIDTH (2020)
|
59 in (150 cm)
|
|
RATED OPERATING CAPACITY (50%) (Since 2019)
|
1,550 lbs (703 kg)
|
|
RATED OPERATING CAPACITY (50%) (2020)
|
1,550 lbs (703 kg)
|
| Hydraulic System |
|
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) |
51 hp (38 kw)
|
|
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow |
26 gpm (98 lpm)
|
|
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure |
3,336 psi |
|
Hydraulic Flow - Standard - Hydraulic Power (Calculated) |
36 hp (26 kw)
|
|
Hydraulic Flow - Standard - Loader Hydraulic Flow |
18 gpm (68 lpm)
|
|
Hydraulic Flow - Standard - Loader Hydraulic Pressure |
3,336 psi |
| Noise Level |
|
Inside Cab* |
83 dB(A) |
|
Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
|
Note (2) |
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
|
Note (3) |
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
|
Outside Cab** |
102 dB(A) |
| Operating Specifications |
|
Breakout Force - Tilt Cylinder |
3,983 lbs (1,806 kg)
|
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
|
Rated Operating Capacity |
1,550 lbs (703 kg)
|
|
Rated Operating Capacity With Optional Counterweight |
1,650 lbs (748 kg)
|
|
Tipping Load |
3,100 lbs (1,406 kg)
|
| Power Train |
|
Travel Speed - Forward Or Reverse - One Speed |
8 mph (12 kph)
|
|
Travel Speed - Forward Or Reverse - Two Speed Option |
11 mph (18 kph)
|
| Service Refill Capacities |
|
Chain Box - Each Side |
2 gal (7 l)
|
|
Cooling System |
3 gal (12 l)
|
|
Engine Crankcase |
3 gal (10 l)
|
|
Fuel Tank |
15 gal (57 l)
|
|
Hydraulic System |
12 gal (45 l)
|
|
Hydraulic Tank |
9 gal (34 l)
|
| Weights |
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
|
Operating Weight |
5,705 lbs (2,587 kg)
|
