Create a CEG Account  /  CEG Login
☰
This machine has been sold or is not currently for sale.

2008 Caterpillar 246C

2008 Caterpillar 246C
2008 Caterpillar 246C
2008 Caterpillar 246C
2008 Caterpillar 246C
2008 Caterpillar 246C
2008 Caterpillar 246C
2008 Caterpillar 246C 2008 Caterpillar 246C 2008 Caterpillar 246C 2008 Caterpillar 246C 2008 Caterpillar 246C 2008 Caterpillar 246C

/ Save to Watch List

Email Dealer

Apply for Financing

MACHINE SOLD

   Auction Info: Starting on 2026-11-18   Click here to place a bid



Machine Info:

Hours:7489
Serial Number:CAT0246CLJAY02490
Machine Location:FORT WORTH, TX

Description:

Located in Lane 6 Spot 1, Open Operator Station, Joystick Steering, Manual Quick Coupler, 74 in Bucket, Counterweight Kit Closing Time: 2026-11-18 10:10:40 AM


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The Caterpillar 246C is a skid steer loader designed for material handling, grading, loading, and general construction work. It features a compact frame, vertical lift path, and hydraulic system suited for use with buckets, forks, augers, grapples, and other attachments. The 246C is commonly used on construction sites, landscaping projects, agricultural operations, and municipal maintenance tasks where maneuverability and lifting performance are important. As part of Caterpillar's skid steer loader lineup, the 246C is built for versatility in confined work areas and for compatibility with a wide range of work tools.
Cab
Fops SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii SAE J231 JAN81, ISO 3449:1992 Level II
Rops SAE J1040 MAY94, ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position 8 in (20 cm)
Bucket Pin Height - Maximum Lift 10 ft (3 m)
Bumper Overhang - Rear Axle 43 in (109 cm)
Clearance At Max Lift And Dump 8 ft (2 m)
Clearance At Maximum Lift And Dump 95 in (242 cm)
Departure Angle 26 degrees
Ground Clearance 9 in (22 cm)
Height 7 ft (2 m)
Height - Top Of Cab 7 ft (2 m)
Height To Top Of Cab 7 ft (2 m)
Length 12 ft (4 m)
Length - With Bucket On Ground 145 in (369 cm)
Length - Without Bucket 117 in (298 cm)
Length W/O Bucket 10 ft (3 m)
Length With Bucket 12 ft (4 m)
Maximum Dump Angle 40 degrees
Maximum Overall Height 157 in (400 cm)
Maximum Reach - With Arms Parallel 55 in (139 cm)
Rack Back Angle - Maximum Height 85 degrees
Reach - Maximum Lift/Dump 24 in (60 cm)
Reach At Max Lift And Dump 24 in (60 cm)
Turn Radius From Center - Bucket 85 in (217 cm)
Turn Radius From Center - Coupler 55 in (139 cm)
Turn Radius From Center - Rear 68 in (173 cm)
Turning Radius From Center - Inc Bucket 95 in (241 cm)
Turning Radius From Center - Machine Rear 59 in (149 cm)
Vehicle Width Over Tires 66 in (168 cm)
Weight 7,381 lbs (3,348 kg)
Wheel Base 4 ft (1 m)
Wheelbase 4 ft (1 m)
Width 6 ft (2 m)
Width Over Tires 6 ft (2 m)
Engine
Bore 4 in (9 cm)
Displacement 201 cu in (3,294 cu cm)
Engine Make 2,236
Engine Model Cat C3.4 DIT
Gross Power 74 hp (55 kw)
Gross Power - Sae J1995 74 hp (55 kw)
Net Flywheel Power 73 hp (54 kw)
Net Power 73 hp (54 kw)
Net Power - Sae 1349 73 hp (54 kw)
Number Of Cylinders 4
Power Measured @ 2,500 rpm
Stroke 5 in (12 cm)
General Specifications
A Height to top of ROPS (Since 2010) 83 in (2,104 mm)
Approx. Machine Weight (Since 2008) 7,480 lbs (3,393 kg)
B Length to coupler (Since 2010) 117 in (2,979 mm)
Blade surface height at level lift arms (Since 2010) 60 in (1,535 mm)
Blade surface height at maximum height (Since 2010) 119 in (3,015 mm)
Blade surface height at minimum lift (Since 2010) 4 in (90 mm)
Bore (Since 2010) 4 in (94 mm)
Breakout force - lift (Since 2010) 5,489 lbf (2,490 kg)
Breakout force - lift (Since 2013) 5,489 lbf (24 kN)
Breakout force - tilt (Since 2010) 6,545 lbf (2,969 kg)
Breakout force - tilt (Since 2013) 6,545 lbf (29 kN)
Bucket overall width (Since 2010) 66 in (1,677 mm)
C Length with bucket on ground (Since 2010) 145 in (3,692 mm)
Capacity at 50% with counter- weight (Since 2008) 2,350 lbs (1,066 kg)
Carriage height above blade top (Since 2010) 37 in (930 mm)
Carriage overall width without step (Since 2010) 46 in (1,159 mm)
Carriage step additional width (Since 2010) 4 in (106 mm)
Clearance at maximum lift/level bucket (Since 2010) 115 in (2,930 mm)
D Maximum overall height (Since 2010) 157 in (3,998 mm)
Dig depth with level bucket (Since 2010) 0 in (10 mm)
Displacement (Since 2010) 201 cu in (3 L)
Dump clearance at maximum lift/dump (Since 2010) 96 in (2,425 mm)
Engine Model (Since 2008) Cat C3.4 DIT
F Departure angle (Since 2010) 26 deg
Floor angle at maximum lift/dump (Since 2010) 40 deg
Floor angle at maximum lift/dump (Since 2013) 40 deg
Floor angle at maximum lift/rack back (Since 2010) 95 deg
Floor angle at maximum lift/rack back (Since 2013) 85 deg
Flywheel Power: Gross (Since 2013) 75 hp (56 kW)
Flywheel Power: Net (Since 2010) 73 hp (54 kW)
Front clearance circle radius (with bucket) (Since 2010) 87 in (2,202 mm)
Front clearance circle radius (with bucket) (Since 2012) 89 in (2,263 mm)
Fuel Tank Capacity (Since 2010) 26 US gal (98 L)
G Wheelbase (Since 2010) 49 in (1,240 mm)
Gross (Since 2010) 75 hp (56 kW)
Ground clearance (Since 2010) 9 in (225 mm)
H Bumper overhang from axle (Since 2010) 43 in (1,089 mm)
Height to Top of Cab (Since 2008) 83 in (2,104 mm)
Hinge pin height at carry position (Since 2010) 8 in (200 mm)
Hinge pin height at maximum lift (Since 2010) 123 in (3,122 mm)
Hydraulic Cycle Time, - Empty Bucket - Dump (HF) (Since 2010) 3 sec (3 Seconds)
Hydraulic Cycle Time, - Empty Bucket - Lower (Empty, - Float Down) (HF) (Since 2010) 4 sec (4 Seconds)
Hydraulic Cycle Time, - Empty Bucket - Raise (HF) (Since 2010) 3 sec (3 Seconds)
Hydraulic Cycle Time, - Empty Bucket - Total (HF) (Since 2010) 9 sec (10 Seconds)
Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Dump (Since 2013) 3 sec (3 Seconds)
Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Lower (Empty, Float Down) (Since 2013) 4 sec (4 Seconds)
Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Raise (Since 2013) 3 sec (3 Seconds)
Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Total (Since 2013) 9 sec (10 Seconds)
Hydraulic Pressure - Standard (Since 2013) 3,335 psi (23,000 kPa)
Hydraulic Pressure - XPS (Since 2013) 4,061 psi (28,000 kPa)
Hydraulic Pump Capacity (Since 2010) 22 US gpm (84 L/min)
Hydraulic Pump Capacity - Standard (Since 2013) 22 US gpm (84 L/min)
Hydraulic Pump Capacity - XPS (Since 2013) 33 US gpm (125 L/min)
Hydraulic System Capacity - (includes tank) (Since 2010) 15 US gal (57 L)
Hydraulic Tank Capacity (Since 2010) 11 US gal (42 L)
J Clearance at maximum lift/dump (Since 2010) 95 in (2,425 mm)
K Floor angle at maximum lift/dump (Since 2010) 40 deg
L Floor angle at maximum lift/rack (Since 2010) 85 deg
Length to Coupler (Since 2008) 145 in (3,692 mm)
M Clearance at maximum lift/level (Since 2010) 115 in (2,930 mm)
Maximum floor angle - at carry position (Since 2010) 26 deg
Maximum floor angle at minimum lift (Since 2010) 26 deg
Maximum Forward Speed (Since 2008) 12 mph (19 km/h)
Maximum overall height (Since 2010) 157 in (3,998 mm)
N Hinge pin height at maximum lift (Since 2010) 123 in (3,122 mm)
Net Power (Since 2008) 73 hp (54 kW)
No. Cylinders (Since 2010) 4
O Reach at level lift arm/bucket (Since 2010) 55 in (1,388 mm)
One Speed Forward (Since 2010) 0 - 8 mph
One Speed Reverse (Since 2010) 0 - 8 mph
Operating weight (Since 2010) 6,986 lbs (3,169 kg)
Optional (Since 2013) 60 in (1,524 mm)
Overall length at minimum lift, level tine (Since 2010) 160 in (4,065 mm)
Overall length at minimum lift, level tine (Since 2012) 160 in (4,065 mm)
Overall length at minimum lift, level tine (Since 2013) 160 in (4,065 mm)
Overall length with bucket on ground (Since 2010) 152 in (3,847 mm)
Product Identification Prefix (Since 2008) JAY
Rated bucket capacity (Since 2010) 1 cu yd (0 cu m)
Rated Engine RPM (Since 2010) 2,500 rpm
Rated operating capacity (Since 2010) 2,150 lbs (975 kg)
Rated Operating Capacity at 50% (Since 2008) 2,150 lbs (975 kg)
Reach at level lift arm/bucket (Since 2010) 55 in (1,388 mm)
Reach at maximum lift/dump (Since 2010) 24 in (600 mm)
Shank front face reach at level lift arms (Since 2010) 33 in (840 mm)
Shank front face reach at maximum height (Since 2010) 15 in (375 mm)
Shank front face reach at minimum lift (Since 2010) 16 in (410 mm)
Stroke (Since 2010) 5 in (120 mm)
Struck capacity (Since 2010) 0 cu yd (0 cu m)
Tipping load (Since 2010) 3,366 lbs (1,527 kg)
Tread Width: Standard (Since 2013) 54 in (1,371 mm)
Two Speed Forward (Since 2010) 0 - 12 mph
Two Speed Reverse (Since 2010) 0 - 12 mph
Width (Since 2010) 66 in (1,676 mm)
Width (Since 2012) 66 in (1,676 mm)
Width (Since 2013) 66 in (1,676 mm)
Width over Tires (Since 2008) 66 in (1,676 mm)
Width Over Tires (Since 2010) 66 in (1,676 mm)
Width over Tires (Since 2011) 66 in (1,676 mm)
Width Over Tires (Since 2012) 66 in (1,676 mm)
Hydraulic
Pump Flow Capacity 22 gpm (83 lpm)
Relief Valve Pressure 3,335 psi
Hydraulic System
Hydraulic Flow (1) Standard
Hydraulic Flow (2) High Flow XPS
Hydraulic Power 43 hp (32 kw)
Loader Hydraulic Flow 22 gpm (83 lpm)
Loader Hydraulic Pressure 3,335 psi
Maximum Loader Hydraulic Flow 33 gpm (125 lpm)
Maximum Loader Hydraulic Pressure 4,061 psi
Loader
Breakout Force 7,328 lbs (3,324 kg)
Bucket Capacity 1 cu yd
Operating Load Rating 2,150 lbs (975 kg)
Tipping Angle 4,300 degrees
Operating Specifications
Breakout Force - Tilt Cylinder 7,328 lbs (3,324 kg)
Rated Operating Capacity 2,150 lbs (975 kg)
Rated Operating Capacity With Optional Counterweight 2,350 lbs (1,066 kg)
Tipping Load 4,300 lbs (1,950 kg)
Operational
Alternator Supplied Amperage 90 amps
Chain Box Fluid Capacity - Each Side 3 gal (10 l)
Cooling System Fluid Capacity 4 gal (14 l)
Engine Oil Fluid Capacity 3 gal (10 l)
Fuel Capacity 26 gal (98 l)
Hydraulic System Fluid Capacity 15 gal (57 l)
Max Speed 8 mph (12 kph)
Operating Voltage 12 V
Operational Weight 7,381 lbs (3,348 kg)
Power Train
Travel Speed Forward 8 mph (12 kph)
Travel Speed Forward - 2-Speed Option 12 mph (19 kph)
Travel Speed Reverse 8 mph (12 kph)
Travel Speed Reverse - 2-Speed Option 12 mph (19 kph)
Service Refill Capacities
Chain Box - Each Side 3 gal (10 l)
Cooling System 4 gal (14 l)
Engine Crankcase 3 gal (10 l)
Fuel Tank 26 gal (98 l)
Hydraulic System 15 gal (57 l)
Hydraulic Tank 11 gal (42 l)
Weights
Operating Weight 7,480 lbs (3,393 kg)

Dealer Contact Info:

Ritchie Bros. Auctioneers



Contact:

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.