Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $39,000.00 USD
Apply for Financing
| Hours: | 3500 |
| Serial Number: | MST00412 |
| Machine Location: | EDMONTON, AB |
| More Information: | https://catused.com/cu/10180858 |
Supplied by HeavyEquipmentData.com →
| Cab | |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Dimensions | |
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach - Maximum Lift | 15 in (37 cm) |
| Bumper Overhang - Rear Axle | 43 in (109 cm) |
| Clearance At Max Lift And Dump | 8 ft (2 m) |
| Clearance At Maximum Lift And Dump | 96 in (245 cm) |
| Departure Angle | 26 degrees |
| Ground Clearance | 9 in (22 cm) |
| Height | 7 ft (2 m) |
| Height - Top Of Cab | 7 ft (2 m) |
| Height To Top Of Cab | 7 ft (2 m) |
| Length | 12 ft (4 m) |
| Length - With Bucket On Ground | 145 in (368 cm) |
| Length - Without Bucket | 117 in (297 cm) |
| Length W/O Bucket | 10 ft (3 m) |
| Length With Bucket | 12 ft (4 m) |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 160 in (407 cm) |
| Maximum Reach - With Arms Parallel | 51 in (128 cm) |
| Rack Back Angle - Maximum Height | 85 degrees |
| Reach - Maximum Lift/Dump | 31 in (78 cm) |
| Reach At Max Lift And Dump | 31 in (78 cm) |
| Turn Radius From Center - Bucket | 85 in (217 cm) |
| Turn Radius From Center - Coupler | 55 in (139 cm) |
| Turn Radius From Center - Rear | 68 in (173 cm) |
| Turning Radius From Center - Inc Bucket | 98 in (248 cm) |
| Turning Radius From Center - Machine Rear | 57 in (144 cm) |
| Vehicle Width Over Tires | 66 in (168 cm) |
| Weight | 7,968 lbs (3,614 kg) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width | 6 ft (2 m) |
| Width Over Tires | 6 ft (2 m) |
| Engine | |
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | 2,236 |
| Engine Model | Cat C3.4 DIT |
| Engine Power - Iso 14396 | 83 hp (62 kw) |
| Gross Power | 84 hp (63 kw) |
| Gross Power - Sae J1995 | 84 hp (63 kw) |
| Net Flywheel Power | 82 hp (61 kw) |
| Net Power | 82 hp (61 kw) |
| Net Power - Eec 80/1269 | 83 hp (62 kw) |
| Net Power - Iso 9249 Eec | 83 hp (62 kw) |
| Net Power - Sae 1349 | 82 hp (61 kw) |
| Number Of Cylinders | 4 |
| Power Measured @ | 2,500 rpm |
| Stroke | 5 in (12 cm) |
| General Specifications | |
| A Height to top of ROPS (Since 2010) | 83 in (2,104 mm) |
| Approx. Machine Weight (Since 2008) | 7,968 lbs (3,614 kg) |
| B Length to coupler (Since 2010) | 117 in (2,979 mm) |
| Blade surface height at level lift arms (Since 2010) | 63 in (1,608 mm) |
| Blade surface height at maximum height (Since 2010) | 123 in (3,130 mm) |
| Blade surface height at minimum lift (Since 2010) | 4 in (90 mm) |
| Bore (Since 2010) | 4 in (94 mm) |
| Breakout force - lift (Since 2010) | 4,991 lbf (2,264 kg) |
| Breakout force - lift (Since 2013) | 4,991 lbf (22 kN) |
| Breakout force - tilt (Since 2010) | 6,587 lbf (2,988 kg) |
| Breakout force - tilt (Since 2013) | 6,587 lbf (29 kN) |
| Bucket overall width (Since 2010) | 72 in (1,829 mm) |
| C Length with bucket on ground (Since 2010) | 145 in (3,692 mm) |
| Capacity at 50% with counter- weight (Since 2008) | 2,945 lbs (1,336 kg) |
| Carriage height above blade top (Since 2010) | 37 in (930 mm) |
| Carriage overall width without step (Since 2010) | 46 in (1,159 mm) |
| Carriage step additional width (Since 2010) | 4 in (106 mm) |
| Clearance at maximum lift/level bucket (Since 2010) | 119 in (3,015 mm) |
| D Maximum overall height (Since 2010) | 160 in (4,075 mm) |
| Dig depth with level bucket (Since 2010) | 1 in (33 mm) |
| Displacement (Since 2010) | 201 cu in (3 L) |
| Dump clearance at maximum lift/dump (Since 2010) | 97 in (2,450 mm) |
| Engine Model (Since 2008) | Cat C3.4 DIT |
| F Departure angle (Since 2010) | 26 deg |
| Floor angle at maximum lift/dump (Since 2010) | 40 deg |
| Floor angle at maximum lift/rack back (Since 2010) | 95 deg |
| Flywheel Power: Gross (Since 2013) | 84 hp (63 kW) |
| Flywheel Power: Net (Since 2010) | 82 hp (61 kW) |
| Front clearance circle radius (with bucket) (Since 2010) | 99 in (2,515 mm) |
| Front clearance circle radius (with bucket) (Since 2012) | 103 in (2,616 mm) |
| Front clearance circle radius (with bucket) (Since 2013) | 103 in (2,616 mm) |
| Fuel Tank Capacity (Since 2010) | 26 US gal (98 L) |
| G Wheelbase (Since 2010) | 49 in (1,240 mm) |
| Gross (Since 2010) | 84 hp (63 kW) |
| Ground clearance (Since 2010) | 9 in (225 mm) |
| H Bumper overhang from axle (Since 2010) | 43 in (1,089 mm) |
| Height to Top of Cab (Since 2008) | 83 in (2,104 mm) |
| Hinge pin height at carry position (Since 2010) | 8 in (200 mm) |
| Hinge pin height at maximum lift (Since 2010) | 127 in (3,233 mm) |
| Hydraulic Cycle Time, - Empty Bucket - Dump (HF) (Since 2010) | 3 sec (3 Seconds) |
| Hydraulic Cycle Time, - Empty Bucket - Lower (Empty, - Float Down) (HF) (Since 2010) | 5 sec (5 Seconds) |
| Hydraulic Cycle Time, - Empty Bucket - Raise (HF) (Since 2010) | 5 sec (5 Seconds) |
| Hydraulic Cycle Time, - Empty Bucket - Total (HF) (Since 2010) | 12 sec (12 Seconds) |
| Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Dump (Since 2013) | 3 sec (3 Seconds) |
| Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Lower (Empty, Float Down) (Since 2013) | 5 sec (5 Seconds) |
| Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Raise (Since 2013) | 5 sec (5 Seconds) |
| Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Total (Since 2013) | 12 sec (12 Seconds) |
| Hydraulic Pressure - Standard (Since 2013) | 3,335 psi (23,000 kPa) |
| Hydraulic Pressure - XPS (Since 2013) | 4,061 psi (28,000 kPa) |
| Hydraulic Pump Capacity (Since 2010) | 22 US gpm (84 L/min) |
| Hydraulic Pump Capacity - Standard (Since 2013) | 22 US gpm (84 L/min) |
| Hydraulic Pump Capacity - XPS (Since 2013) | 33 US gpm (125 L/min) |
| Hydraulic System Capacity - (includes tank) (Since 2010) | 15 US gal (57 L) |
| Hydraulic Tank Capacity (Since 2010) | 11 US gal (42 L) |
| J Clearance at maximum lift/dump (Since 2010) | 96 in (2,450 mm) |
| K Floor angle at maximum lift/dump (Since 2010) | 50 deg |
| L Floor angle at maximum lift/rack (Since 2010) | 85 deg |
| Length to Coupler (Since 2008) | 117 in (2,979 mm) |
| M Clearance at maximum lift/level (Since 2010) | 120 in (3,043 mm) |
| Maximum floor angle - at carry position (Since 2010) | 26 deg |
| Maximum floor angle at minimum lift (Since 2010) | 26 deg |
| Maximum Forward Speed (Since 2008) | 12 mph (19 km/h) |
| Maximum overall height (Since 2010) | 165 in (4,200 mm) |
| N Hinge pin height at maximum lift (Since 2010) | 127 in (3,233 mm) |
| Net Power (Since 2008) | 82 hp (61 kW) |
| No. Cylinders (Since 2010) | 4 |
| O Reach at level lift arm/bucket (Since 2010) | 51 in (1,283 mm) |
| One Speed Forward (Since 2010) | 0 - 8 mph |
| One Speed Reverse (Since 2010) | 0 - 8 mph |
| Operating weight (Since 2010) | 7,904 lbs (3,585 kg) |
| Optional (Since 2013) | 60 in (1,524 mm) |
| Overall length at minimum lift, level tine (Since 2010) | 160 in (4,065 mm) |
| Overall length at minimum lift, level tine (Since 2012) | 160 in (4,065 mm) |
| Overall length at minimum lift, level tine (Since 2013) | 160 in (4,065 mm) |
| Overall length with bucket on ground (Since 2010) | 152 in (3,847 mm) |
| Product Identification Prefix (Since 2008) | MST |
| Rated bucket capacity (Since 2010) | 0 cu yd (0 cu m) |
| Rated Engine RPM (Since 2010) | 2,500 rpm |
| Rated operating capacity (Since 2010) | 2,700 lbs (1,225 kg) |
| Rated Operating Capacity at 50% (Since 2008) | 2,700 lbs (1,225 kg) |
| Reach at level lift arm/bucket (Since 2010) | 50 in (1,263 mm) |
| Reach at maximum lift/dump (Since 2010) | 31 in (781 mm) |
| Shank front face reach at level lift arms (Since 2010) | 29 in (738 mm) |
| Shank front face reach at maximum height (Since 2010) | 27 in (697 mm) |
| Shank front face reach at minimum lift (Since 2010) | 16 in (410 mm) |
| Stroke (Since 2010) | 5 in (120 mm) |
| Struck capacity (Since 2010) | 0 cu yd (0 cu m) |
| Tipping load (Since 2010) | 4,180 lbs (1,896 kg) |
| Tread Width: Standard (Since 2013) | 54 in (1,371 mm) |
| Two Speed Forward (Since 2010) | 0 - 12 mph |
| Two Speed Reverse (Since 2010) | 0 - 12 mph |
| Width (Since 2010) | 66 in (1,676 mm) |
| Width (Since 2012) | 66 in (1,676 mm) |
| Width (Since 2013) | 66 in (1,676 mm) |
| Width over Tires (Since 2008) | 66 in (1,676 mm) |
| Width Over Tires (Since 2010) | 66 in (1,676 mm) |
| Width over Tires (Since 2011) | 66 in (1,676 mm) |
| Width Over Tires (Since 2012) | 66 in (1,676 mm) |
| Hydraulic | |
| Pump Flow Capacity | 22 gpm (83 lpm) |
| Relief Valve Pressure | 3,335 psi |
| Hydraulic System | |
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3,335 psi |
| Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Maximum Loader Hydraulic Pressure | 4,061 psi |
| Loader | |
| Breakout Force | 7,315 lbs (3,318 kg) |
| Bucket Capacity | 1 cu yd |
| Operating Load Rating | 2,700 lbs (1,225 kg) |
| Tipping Angle | 5,400 degrees |
| Operating Specifications | |
| Breakout Force - Tilt Cylinder | 7,315 lbs (3,318 kg) |
| Rated Operating Capacity | 2,700 lbs (1,225 kg) |
| Rated Operating Capacity With Optional Counterweight | 2,945 lbs (1,336 kg) |
| Tipping Load | 5,400 lbs (2,449 kg) |
| Operational | |
| Alternator Supplied Amperage | 90 amps |
| Chain Box Fluid Capacity - Each Side | 3 gal (10 l) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 26 gal (98 l) |
| Hydraulic System Fluid Capacity | 15 gal (57 l) |
| Max Speed | 8 mph (12 kph) |
| Operating Voltage | 12 V |
| Operational Weight | 7,968 lbs (3,614 kg) |
| Power Train | |
| Travel Speed Forward | 8 mph (12 kph) |
| Travel Speed Forward - 2-Speed Option | 12 mph (19 kph) |
| Travel Speed Reverse | 8 mph (12 kph) |
| Travel Speed Reverse - 2-Speed Option | 12 mph (19 kph) |
| Xdp Option Speed - With Tires | 7 mph (10 kph) |
| Xdp Option Speed - With Vts Tracks | 5 mph (8 kph) |
| Service Refill Capacities | |
| Chain Box - Each Side | 3 gal (10 l) |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 26 gal (98 l) |
| Hydraulic System | 15 gal (57 l) |
| Hydraulic Tank | 11 gal (42 l) |
| Weights | |
| Operating Weight | 7,968 lbs (3,614 kg) |
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.
Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Read our privacy policy here.
Mastodon