| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab |
|
Fops |
ISO 3449:2005 Level I |
|
Fops Level Ii |
ISO 3449:2005 Level II |
|
Rops |
ISO 3471:2008 |
| Dimensions |
|
Bucket Pin Height - Carry Position |
9 in (24 cm)
|
|
Bucket Pin Height - Maximum Lift |
11 ft (3 m)
|
|
Bucket Pin Reach - Maximum Lift |
14 in (34 cm)
|
|
Bumper Overhang - Behind Rear Axle |
46 in (117 cm)
|
|
Clearance At Maximum Lift And Dump |
97 in (247 cm)
|
|
Departure Angle |
28 degrees |
|
Ground Clearance |
1 ft (0 m)
|
|
Height - Top Of Cab |
7 ft (2 m)
|
|
Length - With Bucket On Ground |
155 in (394 cm)
|
|
Length - Without Bucket |
127 in (323 cm)
|
|
Maximum Dump Angle |
51 degrees |
|
Maximum Overall Height |
162 in (410 cm)
|
|
Maximum Reach - With Arms Parallel To Ground |
49 in (125 cm)
|
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted). |
|
Rack Back Angle - Maximum Height |
84 degrees |
|
Reach - Maximum Lift/Dump |
29 in (74 cm)
|
|
Roll Back Angle |
28 degrees |
|
Turning Radius From Center - Bucket (Racked) |
91 in (230 cm)
|
|
Turning Radius From Center - Coupler |
58 in (147 cm)
|
|
Turning Radius From Center - Machine Rear |
75 in (190 cm)
|
|
Vehicle Width Over Tires |
76 in (193 cm)
|
|
Wheel Base |
5 ft (1 m)
|
| Engine |
|
Bore |
4 in (10 cm)
|
|
Displacement |
232 cu in (3,802 cu cm)
|
|
Engine Model |
Cat C3.8 DIT (turbo) |
|
Gross Power - Sae J1995 |
110 hp (82 kw)
|
|
Net Flywheel Power |
106 hp (79 kw)
|
|
Net Power - Iso 9249 |
107 hp (80 kw)
|
|
Net Power - Sae 1349 |
106 hp (79 kw)
|
|
Peak Torque - 1,500 Rpm - Sae J1995 |
276 lbs ft (374 nm)
|
|
Stroke |
5 in (12 cm)
|
| General Specifications |
|
category (Since 2020)
|
SKID STEERS |
|
ENGINE POWER (Since 2016)
|
106 hp (79 kw)
|
|
ENGINE POWER (2017)
|
106 hp (79 kw)
|
|
ENGINE POWER (2019)
|
106 hp (79 kw)
|
|
ENGINE POWER (2020)
|
106 hp (79 kw)
|
|
MODEL (Since 2016)
|
272D2 XHP |
|
MODEL (2017)
|
272D2 XHP |
|
MODEL (2019)
|
272D2 XHP |
|
MODEL (2020)
|
272D2 XHP |
|
OPERATING LOAD (Since 2016)
|
3,650 lbs (1,655 kg)
|
|
OPERATING LOAD (2017)
|
3,650 lbs (1,655 kg)
|
|
OPERATING WIDTH (Since 2016)
|
76 in (193 cm)
|
|
OPERATING WIDTH (2017)
|
76 in (193 cm)
|
|
OPERATING WIDTH (2019)
|
76 in (193 cm)
|
|
OPERATING WIDTH (2020)
|
76 in (193 cm)
|
|
RATED OPERATING CAPACITY (50%) (Since 2019)
|
3,650 lbs (1,655 kg)
|
|
RATED OPERATING CAPACITY (50%) (2020)
|
3,650 lbs (1,655 kg)
|
| Hydraulic System |
|
Hydraulic Flow - Xhp - Hydraulic Power (Calculated) |
94 hp (70 kw)
|
|
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Flow* |
40 gpm (151 lpm)
|
|
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Pressure |
4,061 psi |
|
Note |
*When equipped with Cat 400 Series work tools. |
|
Standard Flow Mode - Hydraulic Power - Calculated |
44 hp (33 kw)
|
|
Standard Flow Mode - Loader Hydraulic Flow |
23 gpm (87 lpm)
|
|
Standard Flow Mode - Loader Hydraulic Pressure |
3,335 psi |
| Noise Level |
|
Inside Cab** |
83 dB(A) |
|
Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
|
Note (2) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
|
Note (3) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
|
Outside Cab*** |
104 dB(A) |
| Operating Specifications |
|
Breakout Force - Lift Cylinder |
6,085 lbs (2,760 kg)
|
|
Breakout Force - Tilt Cylinder |
7,362 lbs (3,339 kg)
|
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted). |
|
Rated Operating Capacity |
3,650 lbs (1,655 kg)
|
|
Rated Operating Capacity With Optional Counterweight |
3,900 lbs (1,769 kg)
|
|
Tipping Load |
7,300 lbs (3,311 kg)
|
| Power Train |
|
Travel Speed - Forward Or Reverse - One Speed |
7 mph (12 kph)
|
|
Travel Speed - Forward Or Reverse - Two Speed |
10 mph (17 kph)
|
| Service Refill Capacities |
|
Chain Box - Each Side |
3 gal (10 l)
|
|
Cooling System |
4 gal (16 l)
|
|
Diesel Exhaust Fluid (Def) Tank |
5 gal (19 l)
|
|
Engine Crankcase |
4 gal (13 l)
|
|
Fuel Tank |
32 gal (122 l)
|
|
Hydraulic System |
15 gal (55 l)
|
|
Hydraulic Tank |
10 gal (39 l)
|
| Weights |
|
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted). |
|
Operating Weight |
9,255 lbs (4,197 kg)
|
