| Axles |
|
Front |
Planetary Fixed |
|
Oscillation Angle |
10 degrees |
|
Rear |
Planetary Oscillating |
| Blades |
|
Blade Tilt Adjustment - Left |
1 ft (0 m)
|
|
Blade Tilt Adjustment - Right |
1 ft (0 m)
|
|
Blade Tilt Angle - Left - Hydraulic |
6 degrees |
|
Blade Tilt Angle - Right - Hydraulic |
5 degrees |
|
Height - Including Cutting Edge |
3 ft (1 m)
|
|
Maximum Depth Of Cut |
1 ft (0 m)
|
|
Maximum Lift Above Ground |
3 ft (1 m)
|
|
Total Tilt Adjustment |
2 ft (1 m)
|
|
Width - Moldboard Length |
12 ft (4 m)
|
|
Width - Over End Bits |
12 ft (4 m)
|
| Brakes |
|
Parking Brake |
Drum and Shoe, Spring Applied, Hydraulic Released |
| Cab - Standard |
|
Machine Sound Level (Iso 6395) Tier 3/Stage Iiia Equivalent |
112 dB(A) |
|
Machine Sound Level (Iso 6395) Tier 4/Stage Iv |
111 dB(A) |
|
Operator Sound Level - Iso 6396 |
71 dB(A) |
| Cab - Suppression |
|
Machine Sound Level (Iso 6395) Tier 3/Stage Iiia Equivalent |
110 dB(A) |
|
Machine Sound Level (Iso 6395) Tier 4/Stage Iv |
109 dB(A) |
|
Operator Sound Level - Iso 6396 |
70 dB(A) |
| Dimensions (Approximate) |
|
Centerline Of Rear Axle To Bumper |
7 ft (2 m)
|
|
Ground Clearance |
1 ft (0 m)
|
|
Ground Clearance - Bumper |
2 ft (1 m)
|
|
Height - Top Of Beacon |
13 ft (4 m)
|
|
Height - Top Of Cab Roof |
12 ft (4 m)
|
|
Height - Top Of Exhaust Pipe |
11 ft (3 m)
|
|
Height - Top Of Hood |
8 ft (3 m)
|
|
Hitch To Centerline Of Front Axle |
6 ft (2 m)
|
|
Length - With Blade On Ground |
23 ft (7 m)
|
|
Turning Radius - Inside Of Push Arms |
8 ft (3 m)
|
|
Wheel Base |
11 ft (3 m)
|
|
Width - Over Wheels |
11 ft (3 m)
|
| Engine |
|
Bore |
4 in (10 cm)
|
|
Displacement |
428 cu in (7,010 cu cm)
|
|
Emissions |
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
|
Engine Model |
Cat C7.1 ACERT: configured for two emissions options |
|
Gross Power - Iso 14396 - Tier 3/Stage Iiia Equivalent |
275 hp (205 kw)
|
|
Gross Power - Iso 14396 - Tier 4 Final/Stage Iv |
274 hp (204 kw)
|
|
Gross Power - Sae J1995 - Tier 3/Stage Iiia Equivalent |
286 hp (213 kw)
|
|
Gross Power - Sae J1995 - Tier 4 Final/Stage Iv |
284 hp (212 kw)
|
|
High Idle Speed |
2,270 rpm |
|
Low Idle Speed |
800 rpm |
|
Maximum Altitude - Without Derating |
9,843 ft (3,000 m)
|
|
Maximum Net Torque - 1,400 Rpm - Tier 3/Stage Iiia Equivalent |
749 lbs ft (1,015 nm)
|
|
Maximum Net Torque - 1,400 Rpm - Tier 4 Final/Stage Iv |
899 lbs ft (1,219 nm)
|
|
Net Power |
248 hp (185 kw)
|
|
Rated Power (Net Iso 9249) - Tier 3/Stage Iiia Equivalent |
249 hp (186 kw)
|
|
Rated Power (Net Iso 9249) - Tier 4 Final/Stage Iv |
248 hp (185 kw)
|
|
Rated Power (Sae J1349) - Tier 3/Stage Iiia Equivalent |
249 hp (186 kw)
|
|
Rated Power (Sae J1349) - Tier 4 Final/Stage Iv |
248 hp (185 kw)
|
|
Stroke |
5 in (13 cm)
|
|
Torque Rise - Tier 3/Stage Iiia Equivalent |
26% |
|
Torque Rise - Tier 4 Final/Stage Iv |
52% |
| Hydraulic System |
|
Lift Cylinder, Double Acting - Bore And Stroke |
101.6 mm 627 mm (4 in 24.7 in) |
|
Main Relief Pressure |
3,190 psi |
|
Maximum Supply Pressure |
2,930 psi |
|
Pump Flow At 2,111 Rpm |
24 gpm (89 lpm)
|
|
Tilt Cylinder, Double Acting - Bore And Stroke |
101.6 mm 167 mm (4 in 6.6 in) |
| Hydraulic System - Steering |
|
Bore |
4 in (10 cm)
|
|
Maximum System Flow |
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm) |
|
Steering Pressure Limited |
4,003 psi |
|
Steering System - Circuit |
Closed Center Load Sensing |
|
Steering System - Pump |
Piston Variable Displacement |
|
Stroke |
24 in (60 cm)
|
|
Vehicle Articulation Angle |
84 degrees |
| Operating Specifications |
|
Maximum Operating Weight (Tier 3/Stage Iiia Equivalent) |
48,740 lbs (22,108 kg)
|
|
Maximum Operating Weight (Tier 4 Final/Stage Iv) |
49,353 lbs (22,386 kg)
|
| Operational |
|
Operating Weight |
49,353 lbs (22,386 kg)
|
| Service Refill Capacities |
|
Cooling System - Tier 3/Stage Iiia Equivalent |
19 gal (73 l)
|
|
Cooling System - Tier 4 Final/Stage Iv |
21 gal (81 l)
|
|
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage Iv Only) |
4 gal (16 l)
|
|
Differential - Final Drives - Front |
17 gal (65 l)
|
|
Differential - Final Drives - Rear |
17 gal (65 l)
|
|
Engine Crankcase |
5 gal (20 l)
|
|
Fuel Tank |
132 gal (500 l)
|
|
Hydraulic Tank Only |
20 gal (75 l)
|
|
Note |
All non-road Tier 4 Final and Stage IV diesel engines are required to use: Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. Diesel Exhaust Fluid (DEF) that meets |
|
Transmission |
15 gal (56 l)
|
| Transmission |
|
Transmission Type |
Planetary Powershift ECPC |
|
Travel Speeds - Forward - First |
4 mph (7 kph)
|
|
Travel Speeds - Forward - Second |
8 mph (12 kph)
|
|
Travel Speeds - Forward - Third |
13 mph (21 kph)
|
|
Travel Speeds - Reverse - First |
5 mph (8 kph)
|
|
Travel Speeds - Reverse - Second |
9 mph (14 kph)
|
|
Travel Speeds - Reverse - Third |
15 mph (24 kph)
|
| Wheels |
|
Drum Diameter |
3 ft (1 m)
|
|
Drum Width |
3 ft (1 m)
|
|
Outside Diameter |
5 ft (1 m)
|
|
Tips Per Wheel |
60 |
|
Weight |
9,720 lbs (4,409 kg)
|
|
Width - Over Drums |
11 ft (3 m)
|
