2018 Caterpillar TL1255D For Sale in Hobbs , CO

Name: 2018 Caterpillar TL1255D
Brand: Caterpillar
SKU: 88839558
Price: 94000 USD
Availability: InStock

❮

❯

/ Save to Watch List

For Sale: $94,000.00 USD

Apply for Financing

Wagner Equipment Co.

Wagner Equipment Co. Dealer Info

Wagner Equipment Co. Website

Click here to email Wagner Equipment Co..

Click for Phone Number

Machine Info:

Hours:	4389
Serial Number:	ML701205
Machine Location:	HOBBS , CO
More Information:	https://catused.com/cu/10289649

Description:

4390 BW 7/16/26, ALARM, BACK-UP, STANDARD, AXLE, STANDARD, BELT, SEAT, 3" RETRACTABLE, BRICK GUARD, FRONT SCREEN, C4.4 106KW TIER 4F ENGINE, Cab - Enclosed, CARRIAGE, STANDARD 72", CLIMATE PACK, STANDARD, COUPLER, MANUAL, IT, ENVIRONMENTAL CONTROL,AIR CON, FENDERS, SET OF FOUR, FORK, DUAL TAPER 2" X 6" X 72", INSTRUCTIONS, ANSI, LEVER, MANUAL, FNR/WIPERS/IND, LIGHTS, ROADING, RH, MANUAL, OPER. MAINT. ENGLISH, MONITOR, ADVANCED DISPLAY, Online Owner's Manual , REVERSING, CAMERA, RIDE CONTROL, NONE, STEERING, STANDARD, SUN SCREEN, ROOF, TIRES, 400/75-28, FS, MT, FOAM, TL1255D NORTH AMERICAN ORDER, WASHER/WIPER, REAR, WINDOW, REAR, STANDARD, WORKLIGHTS, A/C COMPATIBLE

Machine Details:

GENERAL APPEARANCE
Notes - GENERAL APPEARANCE	Paint and decals weathered, fork tine bent, engine air filter housing cap loose fitting, radiator shroud damaged, engine belly pan damaged, tilt cylinder leaks, hyd hose leaks and missing bracket, hood bent out of shape latch gets stuck, tires worn,
SAFETY ITEMS
Notes - SAFETY ITEMS	Pin missing for carriage,
OPERATOR STATION
Air Conditioner	Good
Dash Console	Good
Door Latches	Good
EMS Panel / Warnings	Good
Floor Boards	Good
Gauges	Good
Heater	Good
Interior Lights	Good
Meter	Fair
Seat Cushion / Arm Rest	Good
Switches	Good
Windshield Wipers	Good
ENGINE
Blow By	No
Compression in Radiator	No
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Notes - COOLING SYSTEM	No visible leaks or odors at this time.
ELECTRICAL, STARTING AND CHARGING SYSTEM
Alternator	Good
Batteries / Cables	Good
Lighting	Good
Pre-Heater	Good
Starter	Good
Wiring	Good
TRANSMISSION
Transmission - Noisy	No
STEERING
Articulate P & B	Good
Front Axle	Good
Pivot P & B Trunnions	Good
Steering Cylinder	Good
Steering Gear Box	Good
Steering Linkage	Good
Steering Tank	Good
Steering Valves / Pumps	Good
Suspension Cylinders	Good
Tie Rods / Rod Ends	Good
Torsion Rods	Good
BRAKE
Brake Drums / Rotors	Good
Brake Linkage	Good
Compressor	Good
Control Valve	Good
Lines	Good
Master Cylinder	Good
Pump	Good
Type (Pedal, Lever)	Good
Type (Wet, Dry)	Good
HYDRAULICS
Carriage Cylinder	Fair
Frame Cylinder	Good
Hose Lines	Fair
Lift Cylinders	Good
Linkage	Good
Pumps & Valves	Good
Stabilizer Cylinders	Good
Tank	Good
BOOM
Boom Condition	Good
Pins & Bushings	Good
FINAL DRIVES
Housings	Good
Planetaries / Diff	Good
TIRES
Average Life Remaining - TIRES	30
Notes - TIRES	Tires are foam filled,
Tire Size - TIRES	400/75-28
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1	Hour meter was reset after engine rebuild. Engine ecm was replaced, and hour meter is not counting at this time.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Caterpillar TL1255D is a telehandler designed for material handling, lifting, and placement tasks on construction and industrial sites. It features a telescopic boom for extended reach and height, allowing operators to move loads in confined or elevated work areas. The TL1255D is commonly used for loading and unloading materials, positioning pallets, and supporting site logistics. As part of Caterpillar's telehandler lineup, it is built for versatility across rough terrain applications. Key reference terms include Caterpillar TL1255D, telehandler, telescopic boom, material handling equipment, construction equipment, and rough terrain lift truck.

Axles
Types (1)	Trunnion mounted planetary 55 degree steer axles.
Types (2)	High bias limited slip differential on front axle.
Boom Performance
Boom Down	14.4 s
Boom Up	16.7 s
Tele In	16.3 s
Tele Out	18.5 s
Brakes
Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles
Dimensions
Height	8 ft (3 m)
Length	21 ft (6 m)
Weight	34,097 lbs (15,466 kg)
Width	8 ft (3 m)
Engine
Engine Model	Cat C4.4 ACERT*
Gross Power - Basic	142 hp (106 kw)
Note	*Meets U.S. EPA Tier 4 Final emission standards.
Hydraulic System
Auxiliary Hydraulic Flow	25 gpm (95 lpm)
Auxiliary Hydraulic Pressure	3,307 psi
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Pump Type	Variable displacement load sensing axial piston pump
System Operating Pressure	3,771 psi
Operating Specifications
Capacity At Maximum Height (O/R Down)	5,000 lbs (2,268 kg)
Capacity At Maximum Reach (O/R Down)	3,500 lbs (1,588 kg)
Drawbar Pull - Loaded	25,605 lbs ft (34,715 nm)
Frame Leveling	10 degrees
Maximum Forward Reach	42 ft (13 m)
Maximum Lift Height	55 ft (17 m)
Maximum Lift Height (O/R Down)	55 ft (17 m)
Rated Load Capacity	12,000 lbs (5,443 kg)
Top Travel Speed	21 mph (33 kph)
Turning Radius - Over Tires	14 ft (4 m)
Operational
Operating Weight	34,361 lbs (15,586 kg)
Service Refill Capacities
Diesel Exhaust Fluid (Def) Tank	6 gal (22 l)
Fuel Tank	38 gal (144 l)
Hydraulic System	50 gal (189 l)
Tires
Optional	400/75-28 Foam Filled; 14.00-24 Solid; 17.5 25 16PR; 17.5 25 12PR Foam Filled
Standard	400/75-28 Duraforce
Transmission Speeds
Forward	4 speed
Reverse	3 speed
Work Tools
Carriages - Dual Positioning	50 in (127 cm)
Carriages - Side Shift	48 in (122 cm)
Carriages - Standard Rotate	50 in (127 cm)
Carriages - Standard Tilt	50 in (127 cm)
Carriages - Swing (1)	100 degrees, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Carriages - Swing (2)	180 degrees, 1824 mm, 5443 kg (180 degrees, 72 in, 12,000 lb)
Carriages - Wide Rotate	72 in (183 cm)
Carriages - Wide Tilt	72 in (183 cm)
Cubing Forks	[2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in)
Fork Extensions*	90 in (229 cm)
Hydraulic It Coupler	Includes Auxiliary Electrics
Lumber Forks	[2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in)
Note	*For use with 1829 mm (72 in) Lumber Forks.
Pallet Forks - Option 1	[2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in)
Pallet Forks - Option 2	[2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in)